Electrolux ELFE7437AG - User Manual

5 Prevent fire • DO NOT dry items that have been previously cleaned in, soaked in, or spotted with gasoline, cleaning solvents, kerosene, waxes, or other flammable or explosive substances. DO NOT store these items on or near the dryer. These substances give off vapors that could ignite or explode. I...

6 IMPORTANT SAFETY INFORMATION • DO NOT use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product. Before you throw away your old washer or dryer: • Remove doors• Remove the electric power cord• Secure all hoses and drain pipes to p...

7 IMPORTANT SAFETY INFORMATION 208V/240 v Electric Dryer 120 v Gas Dryer UL-approved service cord must be installed on electric dryers (not provided with unit except those manufactured for sale in Canada). Do not, under any circumstances, cut, remove, or bypass the grounding prong. Power cord with 3...

8 FEATURES Anti Static Perfect Steam W rinkle Release Extended T umble Drum Light Delay T ime Contr ol Lock Sanitize Eco Dry Fast Dry 300 Series no no yes yes no yes yes no yes 20 min 400 Series no yes yes yes yes yes yes yes yes 18 min 500 Series yes yes yes yes yes yes yes yes yes 15 min 600 Serie...

10 Electrical system requirements Electrical requirements for electric dryer: CIRCUIT - Individual 30 amp. branch circuit fused with 30 amp. time delay fuses or circuit breakers. Use separately fused circuits for washer and dryer. DO NOT operate washer and dryer on same circuit. POWER SUPPLY - 3-wir...

11 1. The gas service to the dryer must conform with local codes and ordinances and the latest edition of the National Fuel Gas Code ANSI Z223.1/ PRE-INSTALLATION REQUIREMENTS 3-wire power supply cord (not supplied) OUTLET RECEPTACLE - NEMA 14-30R receptacle to be located so the power supply cord is...

12 PRE-INSTALLATION REQUIREMENTS Exhaust system requirements Correct Incorrect Correct Incorrect The following are specific requirements for proper and safe operation of your dryer. 1. NFPA 54, or in Canada, the Natural Gas and Propane Installation Code, CSA B149.1. 2. The gas supply line should be ...

13 PRE-INSTALLATION REQUIREMENTS Exhaust direction Directional exhausting can be accomplished by installing a quick-turn 90° dryer vent elbow directly to exhaust outlet of dryer. Dryer vent elbows are available through your local parts distributor or hardware store. Max . Number o f 90° turns MAXIMU...

14 PRE-INSTALLATION REQUIREMENTS In installations where the exhaust system is not described in the charts, the following method must be used to determine if the exhaust system is acceptable: Correct Incorrect Install male fittings in correct direction: 1. Connect an inclined or digital manometer bet...

15 PRE-INSTALLATION REQUIREMENTS Clearance requirements Installation in a recess or closet 1. A dryer installed in a recess or closet, MUST be exhausted outdoors. 2. No other fuel burning appliance shall be installed in the same recess or closet as a gas dryer. 3. Your dryer needs space around it fo...

16 PRE-INSTALLATION REQUIREMENTS Louvered Door 120 sq. Inches min. Louvered Opening MIN INSTALLATION CLEARANCES - Inches (cm) Sides Rear Top Front Alcove/ recess 0" (0 cm) 0" (0 cm) 0" (0 cm) Open Closet with door vent 0" (0 cm) 0" (0 cm) 0" (0 cm) 1" (2.5 cm) Closet with...

17 PRE-INSTALLATION REQUIREMENTS Dryer dimensions * Connection of water inlet hose on steam dryer adds 3/4 in. (2 cm) to installation depth. 1 Power supply cord length on gas dryer or electric Canadian dryer approximately 60 inches (152.5 cm). 2 Drain hose length on washer approximately 59 inches (1...

18 Connecting the electrical system The following are specific requirements for proper and safe electrical installation of your dryer. Failure to follow these instructions can create electrical shock and/or a fire hazard. Grounding requirements - electric dryer (USA) For a grounded, cord-connected d...

19 INSTALLATION Grounding requirements - electric dryer (Canada) Grounding requirements - gas dryer For a grounded, cord-connected dryer: 1. The dryer MUST be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resista...

20 Electrical connection (non-Canada) - 3 wire cord 1. Turn off power supply to outlet. 2. Remove the screw securing the terminal block access cover in the lower corner on the back of the dryer. 3. Install a UL-approved strain relief according to the power cord/strain relief manufacturer’s instructi...

21 INSTALLATION Electrical connection (non-Canada) - 4 wire cord Access Cover Screw Terminal Block Line 2 (BRASS Terminal) Neutral (SILVER Terminal)Line 1 (BRASS Terminal) Internal Ground (GREEN Screw) Install UL-Approved Strain Relief HereTerminal Screw Recovery Slot 4-wire receptacle (NEMA type 14...

22 Connecting the gas 1. Remove the shipping cap from gas pipe at the rear of the dryer. 2. Connect a 1/2 inch (1.27 cm) I.D. semi- rigid or approved pipe from gas supply line to the 3/8 inch (0.96 cm) pipe located on the back of the dryer. Use a 1/2 inch to 3/8 inch (1.27 cm to 0.96 cm) reducer for...

25 Screwdriver with #2 square bit INSTALLATION Removing latch and hole plugs 1. Open the door.2. Remove plastic hole plugs and save to reinstall later. You may have to use a non-scratching plastic knife if you are unable to dislodge the plugs manually. 3. Remove both screws from door latch. Save lat...

26 INSTALLATION Reinstalling door assembly 1. Rotate the door and hang the upper hook on the back of the hinge in the upper hole of the front panel. Reinstalling latch and hole plugs 1. Install door latch with screws removed earlier. Verify reversed door operation 1. Test door for free, smooth swing...

27 Accessories MATCHING STORAGE PEDESTAL* White Pedestal - P/N EPWD257UIW Titanium Pedestal - P/N EPWD257UTT A storage pedestal accessory, specifically designed for this dryer may be used to elevate the dryer for ease of use. This pedestal will add about 15” (38 cm) to the height of your unit. *Othe...

28 CONTROLS AND SETTINGS Model series 1 POWER 2 Cycle Selector 3 Cycle LED Display 4 Temp Selector 5 DRY LEVEL 6 DRY TIME 7 Options 8 SELECT/DE-SELECT 9 CANCEL 10 START/PAUSE 11 DRY BOOST This manual covers many models and not all cycles, options, or features listed are available on every model. Con...

29 CONTROLS AND SETTINGS These temperature, dryness levels and options are available with the following cycles: BULK Y HE AV Y DUTY NORMAL 20 MIN FA ST D RY DELICA TES TO WEL S TIME DR Y TEMPERATURE (temp) High      Normal      Low     Eco Dry  DRYNESS High     Normal     Low ...

30 These temperature, dryness levels and options are available with the following cycles: BULK Y H EAV Y DUTY NORMAL 18 MIN FA ST D RY DELICA TES TIME DR Y INS TANT REFRESH TEMPERATURE (temp) Sanitize    High      Normal     Low    Eco Dry  DRYNESS Max    High   Normal    Low...

31 CONTROLS AND SETTINGS P R E D I C T I V E D R Y L U X C A R E D R Y POWER HOLD ‘SELECT’ 3s TO MUTE/UNMUTE PERFECT STEAMWRINKLE RELEASEEXTENDED TUMBLE ANTI-STATIC CONTROL LOCK DELAY TIME DRUM LIGHT TEMP HIGH SANITIZE NORMAL LOW ECO DRY HIGH MAX NORMAL LOW DAMP AUTO 75 MIN 60 MIN 45 MIN 30 MIN OPTI...

32 CONTROLS AND SETTINGS PERFECT STEAMWRINKLE RELEASEEXTENDED TUMBLE ANTI-STATIC CONTROL LOCK DELAY TIME DRUM LIGHT B A L A N C E D D R Y L U X C A R E D R Y POWER TEMP HIGH SANITIZE NORMAL LOW ECO DRY HIGH MAX NORMAL LOW DAMP AUTO 75 MIN 60 MIN 45 MIN 30 MIN OPTIONS SELECT DE-SELECT TIME DRY LEVEL ...

33 Press the power button to turn on the unit. Turn the cycle selector in either direction or repeatedly press the cycles button (depending on your model) to scroll to the desired cycle. The indicator light for the cycle selected will be illuminated and the estimated drying time for Auto Dry cycles ...

34 Cycle settings To set or change the drying temperature, dryness level, or drying time press the temp , dryness or time dry buttons to scroll to the desired settings. The indicator light for each setting will be illuminated when selected. To protect your fabrics, not all temperatures or dryness le...

35 sanitize (on select models) Recommended for durable fabrics and towels. Use this selection to remove harmful bacteria from your clothing or other items where sanitization is desired. This option will kill 99.9% of bacteria using a higher temperature required to kill bacteria. Please check fabric ...

36 anti-static (on select models) The anti-static option injects steam into the clothing just before cycle completion to reduce static. dry boost This option increases the drying effectiveness for difficult loads. In conjunction with Automatic moisture sensors and the dry boost option may slightly d...

37 LuxCare TM Lint Shield filter The dryer is equipped with a clamshell style LuxCare TM Lint Shield filter.  NOTE For step-by-step instructions on door reversal, refer to the installation sections of this manual.  NOTE For step-by-step instructions cleaning the lint filter, refer to Cleaning the ...

38 STEPS TIPS IMPORTANT 1. Prepare load for drying. • Dry items of similar fabric, weight and construction in the same load. • Separate dark items from light-colored items. Separate items that shed lint from those that attract lint. • Check for stains which may not have been removed in washing. Repe...

39 OPERATING INSTRUCTIONS STEPS TIPS IMPORTANT 1. Select the appropriate cycle and settings for each load. • See Cycle Selection and Cycle Settings for detailed descriptions of cycle controls. • See Cycle Setting Charts to determine which settings are available for each cycle. • To provide the best ...

40 NORMAL OPERATING SOUNDS Normal operating sounds B C D E A You may or may not hear the following sounds from your new dryer: 1. WATER VALVE (Steam models only.) The flow of water is controlled by electric solenoids. During operation there may be a clicking sound as the valve opens and closes to co...

42 CARE AND CLEANING Rubber Washers Must Be Present USE ONLY NEW HOSES 1. Turn off the water supply to dryer (steam models only) to avoid water leaks due to water pressure surges and unforeseen occurrences in the water supply. 2. Disconnect or unplug the electrical power to the dryer. 1. Review the ...

43 TROUBLESHOOTING Common drying inquiries Many drying problems involve poor cleaning results, poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory drying results, follow these suggestions provided by The Soap and Detergent Association. PROBLEM POSSIBLE CAUSES ...

44 TROUBLESHOOTING Before calling Before calling for service, review this list. It may save both time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this dryer. PROBLEM POSSIBLE CAUSES SOLUTIONS Dryer does not start. • Electrical po...

45 TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTIONS Drying cycle takes too long, outside of the dryer feels too hot or smells hot. • Lint filter is clogged with lint. • Exhaust duct requirements have not been met. • Electric dryer is connected to a 208 volt circuit. • Drying procedures have not bee...

46 LIMITED WARRANTY USA 1-877-435-3287 Electrolux Home Products, Inc., North America 10200 David Taylor Drive Charlotte, NC 28262 Canada 1-800-265-8352 Electrolux Canada Corp. 5855 Terry Fox Way Mississauga, Ontario, Canada L5V 3E4 For the applicable warranty period as set forth below, as measured f...