EdgeStar BR1500BL - User Manual

8 Installation The kegerator should be installed in accordance with local electrical code requirements. The kegerator should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty. Before...

9 Countertop Opening for Dispense Kit Notes: • Choose a location that has ambient temperatures above 50° F and below 95° F. Operation outside these temperatures may result in lowered efficiency or cause other adverse effects. • This unit MUST be installed in an area protected from the elements, e.g....

10 Note: The kegerator should be installed on a firm and level surface that will be able to support the entire weight of a fully loaded unit. It is important for the kegerator to be level in order to work properly. If needed, you can adjust the height of the kegerator by rotating the feet. See the “...

11 Seal Space Between Cabinet and Countertop Once the cabinet is installed and the two openings of the cabinet and countertop are aligned, you must seal off the open space that will be created above the kegerator cabinet and under the countertop. If this open space is not properly sealed, the cabine...

12 ELECTRIC SHOCK HAZARD! • Plug into a grounded 3-prong outlet. • Never remove the grounding prong from the plug. • Never use an adapter to bypass the grounding prong. • DO NOT use an extension cord. • Failure to follow these instructions can result in fire, electrical shock, or death. ! Electrical...

13 Installing the Door Handle To install the door handle: 1. Remove the four screws from the side of the door. This should be the side opposite of the door hinge. 2. Place and align the openings of the handle hinges over the screw holes in the side of the door. 3. Insert and tighten the screws to ho...

16 Keg Loading • Sixth Barrel Keg • 5 lb. CO2tank • CO2Regulator • Slim Quarter Keg • 5 lb. CO2tank • CO2Regulator

17 Operation Installation Checklist before Operation Using the Temperature Control Panel 1. Have all packing materials and tape been removed from the interior and exterior of the kegerator? 2. Have the installation instructions been followed, including connecting the machine to electricity? And has ...

18 Note: The kegerator is equipped with a temperature memory function. If power is suddenly lost, the previously set temperature will be saved and the Kegerator will return to this setting once power is restored. Allow at least 24 hours before storing your items to allow the setting temperature to b...

19 Warning: Never attempt to remove frost with a sharp object! ! Defrosting Preparing the Kegerator for Storage Note that under most refrigerating settings, the unit will automatically defrost in most ambient conditions. However, on colder settings, some frost may build up. Additionally, the more hu...

20 Troubleshooting If the unit appears to be malfunctioning, read through the “Operation” section of this manual first. If the problem persists, check the Troubleshooting Guide below and on the following page. The problem may be something that can easily be solved or explained. Before Calling for He...

22 Specifications Note: Technical data and performance information are provided for reference only. Specifications are subject to change. Check the rating label on the kegerator for the most accurate information. Product Type Undercounter Kegerator Model BR1500BL / BR1500SS / BR1500SSOD Voltage / Fr...

23 EdgeStar Limited Warranty WHAT IS COVERED: LABOR: For a period of ONE (1) YEAR from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar repair facility. At its option, EdgeStar will repair the product with new or remanufactured parts, or exchange the de...