Page 2 - For your safety in using the; Warning; Caution
For your safety in using the CD3434 W a r n i n g s a n d c a u t i o n s i g n s , i l l u s t r a t e d b e l o w , a r e p o s t e dthroughout this manual as well as on the CD3434. They show safeand correct ways to handle the product so as to prevent personalinjury to you and others and to avoid ...
Page 7 - Table of Contents
7 Table of Contents Operating precautions ..............................................11 Notes on operation .......................................................................11About compact discs ....................................................................12About cleaning a CD ..........
Page 11 - Notes on operation; Operating precautions
11 Operating precautions <Your CD3434 will perform well over a long period of time through correcthandling and care.> • For your safety, play only at volume levels that allow outside sounds to be heard. • We recommend using with this player a disc with the logo shown to the left. • You can pla...
Page 12 - About compact discs
12 Operating precautions • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or abadly warped disc may cause deteriorated sound quality or intermittentplayback. Observe the following precautions to ensure high qualit...
Page 14 - OKAY; About cleaning a CD
14 Operating precautions About borrowed CDs • D o n o t u s e a C D w i t h g l u e o r r e m n a n t s o f a d h e s i v e t a p e o rlabels. They may cause the CDto get stuck inside or damagethe deck. How to remove CDs • When removing the ejected disc, pull it straight out along the slot.P r e s s...
Page 15 - Front view; Names of controls and parts; 3 12
15 Names of controls and parts Front view With the front open Never place an object or rest your hands or the like on the frontpanel. Caution Names of controls and parts Switches disc modes. Activates and deactivates mute. Opens/closes front panel and adjusts angle. Selects radio preset channels and...
Page 16 - ESN security operating procedure; About ESN
16 ESN security operating procedure ESN security operating procedure About ESN This deck incorporates ESN (ECLIPSE Security Network). The ESN isa security system which disables all deck functions when the poweris restored if the deck is stolen from the vehicle. Turning the power ofthe deck off or sw...
Page 17 - How to program the Key CD
17 ESN security operating procedure ATTENTION •If there is a problem with the inserted CD, an [ERR] message will appear for two seconds and the CD will be ejected. Reinsertthe ejected CD. •If a CD causes the [ERR] message to appear twice in a row, a [CHANGE] message will appear for two seconds. Try ...
Page 18 - How to cancel the Key CD
18 ESN security operating procedure ATTENTION •This process cancels the protection for the ESN deck.•If power to the ESN deck is disconnected, then reconnected, a Key CD will not need to be inserted in order to return the unit tonormal operation. •Inserting a CD other than the Key CD will not cancel...
Page 19 - How to change the Key CD; How to resume normal operation (ESN security lock out)
19 ESN security operating procedure ATTENTION •If an incorrect CD is inserted, an [ERR_] ("ERR" and error number) message will appear for two seconds, after which theCD will be ejected. •If [ERR5] (the 5th time an error has occurred) appears, [HELP] will appear, after which the CD will be ej...
Page 20 - What happens if an incorrect CD is inserted?; Note
20 ESN security operating procedure ATTENTION •If an incorrect CD is inserted, an [ERR_] ("ERR" and error number) message will appear for two seconds, after which theCD will be ejected. •This process cancels the protection for the ESN deck. After the 5th incorrect attempt, the display reads ...
Page 21 - How to turn the security indicator on/off
21 ESN security operating procedure How to turn the security indicator on/off With the power OFF, press button [2], then the [FUNC]button and hold both for more than one second. 1 [IND. FLASH] or [IND. -----] appears on the display. 2 [IND. FLASH] means the security indicator will flash when thevehi...
Page 22 - Turning the power on and off; Basic operation
22 Basic operation Turning the power on and off.When the power is turned on, the state used when the power wasturned off such as CD and tuner playing is restored.When the vehicle has no ACC position on the ignition switch, care isneeded when turning off the deck. Follow Step 2 or Step 3 whenturning ...
Page 23 - Listening to a CD; Insert a CD into the disc slot, label side up.
23 Basic operation Listening to a CD Press the [OPEN] button for less than one second. 1 The front panel opens. Insert a CD into the disc slot, label side up. 2 The CD will immediately start playing. Press the [OPEN] button. 3 The front panel closes. ATTENTION When a CD is already loaded, press the ...
Page 24 - Listening to the tuner; ] button to start the automatic
24 Basic operation Listening to the tuner Press the [FM AM] button. 1 This will turn the tuner on. Press the [FM AM] button to switch to the desired FM orAM bands. 2 Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed. Turn the [SEL] button to the left or right...
Page 25 - Adjusting audio volume; Muting the volume
25 Basic operation Warning Adjusting audio volume Turn the [AUDIO CONTROL] button to the left or right. 1 Turn to the right: Increases the volume.Turn to the left: Decreases the volume. Do not adjust the volume or other controls while driving thevehicle. Do so only while parked in a safe location. [...
Page 26 - Switching audio control modes; BASS Mode
26 Basic operation Adjusts treble level. Treble mode can be adjusted for eachsource (CDP/CDC, FM and AM).Turn the [AUDIO CONTROL] button to the left or right.Turn to the right: Emphasizes high sounds.Turn to the left: Softens high sounds. TREB (TREBLE) Mode V a r i o u s a u d i o c o n t r o l m o ...
Page 29 - Enabling the loudness control
29 Basic operation ATTENTION To disable the loudness feature, repeat the above procedure todisplay the [LOUD OFF] indication. ATTENTION If the battery terminals have been disconnected because of areason such as vehicle maintenance, the SVC settings will returnto their default values. If this happens...
Page 30 - Making changes with Function Mode
30 Basic operation A variety of settings can be changed. The function mode is activated. Setting items will be displayed in the following order when the[SEL] button is turned to the right. Making changes with Function Mode Press the [FUNC] button. 1 Turn [SEL] button in either direction to display s...
Page 31 - Disabling the guide tone feature (for button operation); Contrast adjustment
31 Basic operation T h e r e c e i v e r i s s e t a t t h e f a c t o r y t o e m i t a b e e p t o n e i nresponse to button operation. The guide tone feature may bedisabled in the following procedure: Turn [SEL] button to select GUIDE TONE. Press the [SEL] button. The guide tone mode will be swit...
Page 33 - Setting the time
33 Basic operation This receiver uses the 12-hour display notation. Turn [SEL] button to select CLOCK ADJ. Press the [SEL] button. The clock adjustment mode is activated. Turn [SEL] button to display the item to be selected foradjustment. Hours, minutes or exact hour will be switched each time thebu...
Page 34 - Making changes with Sound Adjustment Mode
34 Basic operation [SOUND] button Used to adjust acoustic feature in the vehicle. The sound adjustment mode is activated. Making changes with Sound Adjustment Mode Press the [SOUND] button. 1 Setting items will be displayed in the following order when the[SEL] button is turned to the right. Turn [SE...
Page 36 - Switching Non-Fader modes
36 Basic operation Here, the LPF (low-pass filter) to the non-fader pre-out can beswitched ON and OFF.Since the low-pass filter passes only lower ranges (higherranges are cut off), efficient playback is enabled by cutting offmid to higher range elements not needed for a woofer. Turn [SEL] button to ...
Page 37 - Adjustment of the front panel angle
37 Basic operation Adjustment of the front panel angle While holding the button, the front panel opens regardless ofthe stage. The operation stops when the limit of adjustableangles is reached. Press and hold the [OPEN] button for more than onesecond. 1 The front panel will be completely closed. P r...
Page 38 - Listening to CDs; How to operate the CD player
38 How to operate the CD player Listening to CDs Press the [DISC] button. 1 First press the [DISC] button to switch to the disc mode. It isassumed here that a CD has already been loaded into the unit. This starts CD play.If an external CD changer is connected, each additional pressof the [DISC] butt...
Page 39 - Press and hold the [SEEK
39 How to operate the CD player [SEEK ] button [FAST ] button Button [4] Advancing to the next track or returning tothe beginning of the track being played Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track.Turn to the left: Returns to the beginning of the tr...
Page 41 - Ejecting the disc
41 How to operate the CD player Ejecting the disc Press the [OPEN] button for less than one second. 1 The front panel opens fully and ejects the disc. Remove the disc and press the [OPEN] button. 2 The front panel returns to the angle before the disc ejection. Ifleft alone for 15 seconds after the d...
Page 42 - Displaying CD TEXT
42 How to operate the CD player Displaying CD TEXT Press the [DISP] button for more than one second. 1 Pressing the [DISP] button while text is displayed scrolls thedisplay in the order DISC title ➔ TRACK title, and then the display stops with the TRACK title.If the CD does not contain any text data...
Page 43 - How to operate the MP3 player; About MP3
43 How to operate the MP3 player How to operate the MP3 player About MP3 MP3 (MPEG Audio Layer III) is a standard format for audio compressiontechnology. By using MP3, a file can be compressed to one-tenth the sizeof the original.This deck has limitations on MP3 file standards and recorded media and...
Page 44 - Media
44 How to operate the MP3 player M e d i a c a p a b l e o f p l a y i n g M P 3 i n c l u d e s C D - R a n d C D - R W d i s c s .Compared to CD-ROM media commonly used for music discs, CD-R discsare fragile in high temperature/high humidity environments and one sectionof the CD-R may become incap...
Page 45 - File names
45 How to operate the MP3 player Only files with the MP3 file extension ".mp3" can be recognized as MP3 andplayed. Be sure to save MP3 files with the ".mp3" file extension. The "MP"l e t t e r s o f t h e f i l e e x t e n s i o n w i l l b e r e c o g n i z e d w h e t h e r...
Page 46 - Listening to MP3 file
46 How to operate the MP3 player Listening to MP3 file Press the [DISC] button. 1 This starts MP3 file play.If an external CD changer is connected, each additional pressof the [DISC] button will switch modes from CD changer 1 ➔ CD changer 2 ➔ CD player. A changer or player with no discs loaded will ...
Page 47 - Skipping to the next or previous folder
47 How to operate the MP3 player Advancing to the next track (file) or returning tothe beginning of the track (file) being played Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track (file).Turn to the left: Returns to the beginning of the track (file)being pla...
Page 49 - Displaying title
49 How to operate the MP3 player Press the button briefly to randomly play the files in the samelayer as the folder being played.Pressing the button until [ALL RANDOM] is displayed willrandomly play the files in all the folders.To cancel, press button [6] again. Playing files in random order (RANDOM...
Page 50 - Tuning to a station; How to operate the tuner
50 How to operate the tuner Tuning to a station Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed. First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations inmemory. The receiver will accept up to 2...
Page 52 - Manually setting stations into memory
52 How to operate the tuner Manually setting stations into memory Press the [FM AM] button to switch between FM and AM. 1 Turn the [SEL] button to the right or left to tune to thestation to be entered in memory. 2 This section covers the setting of stations in memory under thenumbered buttons. Selec...
Page 53 - Preset station scan; Check that the deck is in standby mode.; Changing the reception sensitivity for automatic scanning
53 How to operate the tuner Preset station scan Press the [SEL] button for less than one second. 1 [P SCAN] will appear at the display, and stations stored underpreset buttons [1] through [6] will be played for five secondseach. To stop the preset scan mode at a desired station, pressthe [SEL] butto...
Page 54 - Changing the radio band location
54 How to operate the tuner Changing the radio band location You can switch the location for the radio bands used between theNorth American region and the Asia/Australia region. The defaultsetting is USA (North America). Check that the deck is in standby mode. 1 Press and hold the button [3], then [...
Page 55 - FM reception characteristics; FM reception differs from AM
55 How to operate the tuner FM reception characteristics A characteristic of transmitted signals is that lower frequenciestravel further. FM frequencies are much higher than AM’s(similar to a ray of light): they won’t bend but they will reflect.Often, they will be interrupted by tall buildings, moun...
Page 56 - Reception area of FM broadcasts; Multipath
56 How to operate the tuner A home receiver can catch weak FM stereo signals through theuse of a tall, directional or ultra-sensitive antenna. In a movingvehicle, the area for good reception is limited because ofvarying conditions encountered while driving, including thetypes and heights of broadcas...
Page 57 - Cleaning the remote control; How to use the Card remote control
57 How to use the Card remote control Cleaning the remote control Precautions in use of the remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it,wear out the battery or cause a malfunction. • Keep the remote contr...
Page 58 - Turning the power on/off; Adjusting the audio volume
58 How to use the Card remote control [PWR]button [MUTE]button [+] button[-] button Remote-controllight receptor Turning the power on/off Press the [PWR] button. 1 The power turns on or off each time the button is pressed. When the power is turned on, the state used when the power wasturned off such...
Page 59 - Switching playback modes; How to play the tuner; Selecting the FM/AM band
59 How to use the Card remote control [MODE] button [BAND] button Switching playback modes Press the [MODE] button. 1 Press the button to switch modes in the following sequence: Tuner Disc How to play the tuner Selecting the FM/AM band Press the [BAND] button. Each press will switch tuner modes from...
Page 60 - Selecting a station (manually or automatically); Selecting preset stations; Switching disc modes; How to play CDs
60 How to use the Card remote control [BAND] button [ PRESET CH ] buttons [ TUNE • SEEK ] buttons Selecting a station (manually or automatically) Press the [ TUNE•SEEK ] button. [ ] button: Tunes to higher frequency stations. [ ] button: Tunes to lower frequency stations. 1 A short press of the butt...
Page 61 - Skipping to the next or previous disc
61 How to use the Card remote control [ DISC ] buttons [ TRACK • APS ] buttons Press the [ TRACK•APS ] button. [ ] button: Skips to the next track. [ ] button: Returns to the beginning of the track being played. (Press repeatedly to move to previoustracks.) 1 Skipping to the next or previous disc Pr...
Page 62 - Replacing the battery; Push in the carrier until it snaps into place.
62 How to use the Card remote control Replacing the battery On the back of the remote control, while pressing thelocking knob on the battery slot cover toward your right,pull out the battery carrier with your fingernail. 1 Use one CR2025 battery. Unlock Remove the old battery, then place the new one...
Page 63 - How to use an optional NOB remote control
63 How to use an optional NOB remote control [MUTE] button Muting the volume Press the [MUTE] button for more than one second to cut thevolume or restore it instantly. DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK PU SH-MOD E [PWR] button Remote-controllight receptor [AUDIO CONTROL] button Tu...
Page 66 - Illuminating the NOB remote control
66 How to use an optional NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK PU SH-MOD E [ILLUMI] button [ DISC ] buttons [ TRACK ] buttons Advancing to the next track or returning tothe beginning of the track being played Press the [ TRACK ] button. [ ] button: Skips to the nex...
Page 71 - Skipping to the next or previous CD
71 How to operate the receiver with an optional CD changer connected ATTENTION •Doing random playback, press button [5] to repeat the track being played. To cancel repeat play (go back to random play),press button [5] again. During playback of a particular track: The track being played isplayed repe...
Page 72 - Specifying a CD to play
72 How to operate the receiver with an optional CD changer connected Buttons 1 2 3 4 5 6 CD 1 2 3 4 5 6 7 8 9 10 11 12 To select a CD from nos. 7 to 12, press the desired buttonconsiderably longer. Press the [SEL] button for less than one second. 1 Press a button from [1] to [6]. 2 Specifying a CD t...
Page 73 - If you have a question:
73 If you have a question: F i r s t c h e c k t h e i t e m s m e n t i o n e d b e l o w b e f o r e a t t e m p t i n g t otroubleshoot problems. If a problem occurs, for instance when the unit does not respondto any button presses, or the display doesn't work correctly,press the [RESET] button u...
Page 74 - Displayed information (for troubleshooting)
74 If you have a question: Information Code Table When "INFO " flashes on the indicator Nos.2~7 are displayed. Information Contents Explanation and remedial action to take 2 NO DISC LOADED IN There is no disc in the magazine or player. Load THE MAGAZINE a disc in the magazine. (Load a music ...
Page 77 - GENERAL; Specifications
77 Specifications < GENERAL > Power Supply 14.4V DC (11-16V) Current Drain 3A MAX Dimensions (W x H x D) In-Dash Unit 7" x 2" x 6-1/8" (178 x 50 x 155mm) Mass (weight) Approx. 1.4kg Usage temperature range -20°C to +65°C (-4°F to +149°F ) Storage temperature range -40°C to +85°C (-...
Page 78 - Components; Before installation; Installation angle
78 Before installation No. Item Q'ty 1 Main unit 1 2 Mounting sleeve 1 3 Side bracket 2 4 Rear bracket 1 5 Bezel 1 6 Bushing 1 7 Self-tapping screw (6 x 16 mm) 2 8 Stud bolt 1 9 Flat head screw (5 x 8 mm) 4 10 Hex-head bolt (5 x 20 mm) 2 11 Hex nut (5 mm) 2 12 Interconnecting cable 1 13 Remote contr...
Page 79 - Mounting the main unit; Mounting instruction
79 Mounting instruction Mounting the main unit Insert the mounting sleeve into the opening in the vehicledash board or console box. 1 Use a screwdriver or the like to bend the tabs in themounting sleeve to secure the mounting sleeve. 2 Attach the side brackets to the main unit using flatheadscrews. ...
Page 80 - Mount the stud bolt to the main unit.
80 Mounting instruction Mount the stud bolt to the main unit. 4 Insert the main unit into the mounting sleeve until it locksin place. 5 Fasten the rear of the main unit using either method [A]or [B]. 6 Install the bezel on the main unit. 7 TOP TO P BEZEL 5 MOUNTING SLEEVE 2 STUD BOLT 8 BUSHING METAL...
Page 81 - Names of lead wires and destinations (refer to Page 82)
81 Mounting instruction Names of lead wires and destinations (refer to Page 82) No. Name Wire color Destination 1 ACC Red Connect where the power comes onw h e n t h e i g n i t i o n i s i n t h e A C Cposition. 2 B+ Yellow Connect where the power is constantlyavailable, regardless of the ignitions...
Page 82 - System
82 Mounting instruction System CD3434 CD3434 CH3083 CH3083 CH3083 CD3434
Page 84 - wer Amplifier
84 Mounting instruction Caution Never connect the power supply to the speaker leads, otherwise it cause damage to the main unit. CD3434 CH3083 (+) (– ) (+) (+) (+) (– ) (– ) (– ) 2) CD3434 + CH3083 + P o wer Amplifier
Page 86 - AUSTRALIA; How to contact customer service
86 How to contact customer service S h o u l d t h e p r o d u c t r e q u i r e s e r v i c e , p l e a s e c o n t a c t y o u r n e a r e s tfollowing Eclipse dealer. < U.S.A/CANADA > DIVISION OF FUJITSU TEN CORP. OF AMERICA19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502Phone: (310) 327-2151...
Page 87 - KOREA
87 How to contact customer service < KOREA > HYUNDAI AUTONET Co., LTD.1st FL. Namhyoung Bldg, 746-23 Yeoksam-Dong, Kangnam-Ku,Seoul, Korea 135-080Phone: 02-508-6001Fax: 02-2-508-6067 Transpectra Co., Ltd.115-16 nonhyun dong kangnam ku Seoul, Korea.Phone: 02-540-4595Fax: 02-2-540-4666 < TAIW...
Page 88 - M e m o
88 M e m o • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Page 91 - IMPORTANT; RECORD YOUR “KEY CD”
IMPORTANT RECORD YOUR “KEY CD” HERE… STORE YOUR “KEY CD” ALONG WITH YOUR OWNER’S MANUAL IN YOUR SOCK DRAWER. 91
Page 92 - FUJITSU TEN LIMITED
090001-1459A700 0405 (Y.O) CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD3434 for identification. The serial number is labeled or stamped on the chassis. Serial No. FUJITSU TEN LIMITED
