Page 2 - For your safety in using the; Warning; Caution
For your safety in using the CD3414 W a r n i n g s a n d c a u t i o n s i g n s , i l l u s t r a t e d b e l o w , a r e p o s t e dthroughout this manual as well as on the CD3414. They show safeand correct ways to handle the product so as to prevent personalinjury to you and others and to avoid ...
Page 7 - Table of Contents
7 Table of Contents Operating precautions ............................................. 10 Notes on operation ..................................................................... 10About compact discs .................................................................. 11About cleaning a CD ............
Page 10 - Notes on operation; Operating precautions
10 Operating precautions <Your CD3414 will perform well over a long period of time through correcthandling and care.> • For your safety, play only at volume levels that allow outside sounds to be heard. • We recommend using with this player a disc with the logo shown to the left. • You can pla...
Page 11 - About compact discs
11 Operating precautions • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or abadly warped disc may cause deteriorated sound quality or intermittentplayback. Observe the following precautions to ensure high qualit...
Page 13 - OKAY; About cleaning a CD
13 Operating precautions About borrowed CDs • D o n o t u s e a C D w i t h g l u e o r r e m n a n t s o f a d h e s i v e t a p e o rlabels. They may cause the CDto get stuck inside or damagethe deck. How to remove CDs • When removing the ejected disc, pull it straight out along the slot.P r e s s...
Page 14 - Names of controls and parts; 2 11
14 Names of controls and parts Names of controls and parts Switches disc modes. Ejects compact disc. Selects radio preset channels and performs disc mode functions. Inserts compact discs. Switches screen display. Automatically finds radio reception and fast forward/rewind. Selects radio stations and...
Page 15 - ESN security operating procedure; About ESN
15 ESN security operating procedure ESN security operating procedure About ESN This deck incorporates ESN (ECLIPSE Security Network). The ESN isa security system which disables all deck functions when the poweris restored if the deck is stolen from the vehicle. Turning the power ofthe deck off or sw...
Page 16 - How to program the Key CD
16 ESN security operating procedure ATTENTION •If there is a problem with the inserted CD, an [ERR] message will appear for two seconds and the CD will be ejected. Reinsertthe ejected CD. •If a CD causes the [ERR] message to appear twice in a row, a [CHANGE] message will appear for two seconds. Try ...
Page 17 - How to cancel the Key CD
17 ESN security operating procedure ATTENTION •This process cancels the protection for the ESN deck.•If power to the ESN deck is disconnected, then reconnected, a Key CD will not need to be inserted in order to return the unit tonormal operation. •Inserting a CD other than the Key CD will not cancel...
Page 18 - How to change the Key CD; How to resume normal operation (ESN security lock out)
18 ESN security operating procedure ATTENTION •If an incorrect CD is inserted, an [ERR_] ("ERR" and error number) message will appear for two seconds, after which theCD will be ejected. •If [ERR5] (the 5th time an error has occurred) appears, [HELP] will appear, after which the CD will be ej...
Page 19 - What happens if an incorrect CD is inserted?; Note
19 ESN security operating procedure ATTENTION •If an incorrect CD is inserted, an [ERR_] ("ERR" and error number) message will appear for two seconds, after which theCD will be ejected. •This process cancels the protection for the ESN deck. After the 5th incorrect attempt, the display reads ...
Page 20 - How to turn the security indicator on/off
20 ESN security operating procedure How to turn the security indicator on/off With the power OFF, press button [2], then the [FUNC]button and hold both for more than one second. 1 [IND. FLASH] or [IND. -----] appears on the display. 2 [IND. FLASH] means the security indicator will flash when thevehi...
Page 21 - Turning the power on and off; Basic operation
21 Basic operation Turning the power on and off.When the power is turned on, the state used when the power wasturned off such as CD and tuner playing is restored.When the vehicle has no ACC position on the ignition switch, care isneeded when turning off the deck. Follow Step 2 or Step 3 whenturning ...
Page 22 - Listening to a CD; Insert a CD into the disc slot, label side up.
22 Basic operation Listening to a CD Insert a CD into the disc slot, label side up. 1 The CD will start playing. ATTENTION When a CD is already loaded, press the [DISC] button to switchto the CD mode. [DISC] button
Page 23 - Listening to the tuner; ] button to start the automatic; Adjusting audio volume
23 Listening to the tuner Press the [FM AM] button. 1 This will turn the tuner on. Press the [FM AM] button to switch to the desired FM orAM bands. 2 Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed. Turn the [SEL] button to the left or right to tune to asta...
Page 24 - Switching audio control modes; BASS Mode
24 Basic operation V a r i o u s a u d i o c o n t r o l m o d e s m a y b e f i n e - t u n e d u s i n g t h i sprocedure. Modes will switch in the order shown below each time thebutton is pressed. Switching audio control modes Press the [AUDIO CONTROL] button for less than onesecond to select the...
Page 25 - Enabling the loudness control
25 Basic operation Adjusts left/right speaker balance.Turn the [AUDIO CONTROL] button to the left or right.Turn to the right: Emphasizes right speakers.Turn to the left: Emphasizes left speakers. Adjusts front/rear speaker balance.Turn the [AUDIO CONTROL] button to the left or right.Turn to the righ...
Page 26 - Making changes with Function Mode; Disabling the guide tone feature (for button operation)
26 Basic operation A variety of settings can be changed. The function mode is activated. Setting items will be displayed in the following order when the[SEL] button is turned to the right. Making changes with Function Mode Press the [FUNC] button. 1 Turn [SEL] button in either direction to display s...
Page 27 - Setting the time
27 Basic operation This receiver uses the 12-hour display notation. Turn [SEL] button to select CLOCK ADJ. Press the [SEL] button. The clock adjustment mode is activated. Turn [SEL] button to display the item to be selected foradjustment. Hours, minutes or exact hour will be switched each time thebu...
Page 28 - Listening to CDs; How to operate the CD player
28 How to operate the CD player Listening to CDs Press the [DISC] button. 1 First press the [DISC] button to switch to the disc mode. It isassumed here that a CD has already been loaded into the unit. This starts CD play. Caution How to operate the CD player Playback may be intermittent when there i...
Page 29 - Press and hold the [SEEK
29 How to operate the CD player Advancing to the next track or returning tothe beginning of the track being played Turn the [SEL] button to the left or right. 1 Turn to the right: Advances to the next track.Turn to the left: Returns to the beginning of the track beingplayed. (Repeat turning for prev...
Page 31 - Ejecting the disc
31 How to operate the CD player Ejecting the disc Press the [ (EJECT)] button. 1 Disc is ejected. Displaying CD TEXT Press the [DISP] button. 1 Each time the button is pressed, the following will be displayedin order.Elapsed time ➔ Disc title/Track title* ➔ Clock *: The display are shows a maximum o...
Page 32 - About MP3; How to operate the MP3 player; Playable MP3 file standards
32 How to operate the MP3 player About MP3 How to operate the MP3 player MP3 (MPEG Audio Layer III) is a standard format for audio compressiontechnology. By using MP3, a file can be compressed to one-tenth the sizeof the original.This deck has limitations on MP3 file standards and recorded media and...
Page 33 - Media
33 How to operate the MP3 player M e d i a c a p a b l e o f p l a y i n g M P 3 i n c l u d e s C D - R a n d C D - R W d i s c s .Compared to CD-ROM media commonly used for music discs, CD-R discsare fragile in high temperature/high humidity environments and one sectionof the CD-R may become incap...
Page 34 - File names
34 How to operate the MP3 player Only files with the MP3 file extension ".mp3" can be recognized as MP3 andplayed. Be sure to save MP3 files with the ".mp3" file extension. The "MP"l e t t e r s o f t h e f i l e e x t e n s i o n w i l l b e r e c o g n i z e d w h e t h e r...
Page 35 - Listening to MP3 file
35 How to operate the MP3 player Listening to MP3 file Press the [DISC] button. 1 This starts MP3 file play. Playback may be intermittent when there is a scratch on a CD orwhen the recorded side is dirty. Caution Note When music data recorded in the normal way (CD-DA) ispresent on the same disc with...
Page 36 - Skipping to the next or previous folder; Return to the root directory of the CD
36 How to operate the MP3 player Skipping to the next or previous folder Press button [1] or [2]. 1 Button [1]: Selects the next folder.Button [2]: Selects the next lower folder. Fast forward or rewind the song currently being played. [SEEK ] button : Fast forward. [FAST ] button : Rewind. Fast Forw...
Page 38 - Displaying title
38 How to operate the MP3 player Press the button briefly to randomly play the files in the currentfolder being played.Pressing the button until [ALL RANDOM] is displayed willrandomly play the files in all the folders.To cancel, press button [6] again. Playing files in random order (RANDOM) Press bu...
Page 39 - Tuning to a station; How to operate the tuner
39 How to operate the tuner Tuning to a station Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed. First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations inmemory. The receiver will accept up to 2...
Page 41 - Manually setting stations into memory
41 How to operate the tuner Manually setting stations into memory Press the [FM AM] button to switch between FM and AM. 1 Turn the [SEL] button to the right or left to tune to thestation to be entered in memory. 2 This section covers the setting of stations in memory under thenumbered buttons. Selec...
Page 42 - Preset station scan; Switching the display
42 How to operate the tuner Preset station scan Press the [SEL] button for less than one second. 1 [P SCAN] will appear at the top of the display, and stationsstored under preset buttons [1] through [6] will be played forfive seconds each. To stop the preset scan mode at a desired station, pressthe ...
Page 43 - Changing the reception sensitivity for automatic scanning; Check that the deck is in standby mode.; Changing the radio band location
43 How to operate the tuner Changing the reception sensitivity for automatic scanning Check that the deck is in standby mode. 1 Press and hold the button [1], then [FM AM] button, andhold both for more than three seconds. 2 The mode switches between AUTO mode and DX mode eachtime the buttons are pre...
Page 44 - FM reception characteristics; FM reception differs from AM
44 How to operate the tuner FM reception characteristics A characteristic of transmitted signals is that lower frequenciestravel further. FM frequencies are much higher than AM’s(similar to a ray of light): they won’t bend but they will reflect.Often, they will be interrupted by tall buildings, moun...
Page 45 - Reception area of FM broadcasts
45 How to operate the tuner A home receiver can catch weak FM stereo signals through theuse of a tall, directional or ultra-sensitive antenna. In a movingvehicle, the area for good reception is limited because ofvarying conditions encountered while driving, including thetypes and heights of broadcas...
Page 46 - Cleaning the remote control; How to use an optional Card remote control
46 How to use an optional Card remote control Cleaning the remote control Precautions in use of the remote control • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it,wear out the battery or cause a malfunction. • Keep the remo...
Page 47 - Turning the power on/off; Adjusting the audio volume
47 How to use an optional Card remote control [PWR]button [MUTE]button [+] button[-] button Remote-controllight receptor Turning the power on/off Press the [PWR] button. 1 The power turns on or off each time the button is pressed. When the power is turned on, the state used when the power wasturned ...
Page 48 - Switching playback modes; How to play the tuner; Selecting the FM/AM band
48 How to use an optional Card remote control [MODE] button [BAND] button Switching playback modes Press the [MODE] button. 1 Press the button to switch modes in the following sequence: Tuner Disc How to play the tuner Selecting the FM/AM band Press the [BAND] button. Each press will switch tuner mo...
Page 49 - Selecting a station (manually or automatically); Selecting preset stations; Switching disc mode; How to play CDs
49 How to use an optional Card remote control [BAND] button [ PRESET CH ] buttons [ TUNE • SEEK ] buttons Selecting a station (manually or automatically) Press the [ TUNE•SEEK ] button. [ ] button: Tunes to higher frequency stations. [ ] button: Tunes to lower frequency stations. 1 A short tap of th...
Page 51 - Replacing the battery; Push in the carrier until it snaps into place.
51 How to use an optional Card remote control Replacing the battery On the back of the remote control, while pressing thelocking knob on the battery slot cover toward your right,pull out the battery carrier with your fingernail. 1 Use one CR2025 battery. Unlock Remove the old battery, then place the...
Page 52 - How to use an optional NOB remote control
52 How to use an optional NOB remote control DISC BAND MODE MUTE ILLUMI PWR E-COM TRACK TUNE SEEK PU SH-MOD E [PWR] button [MUTE]button Remote-controllight receptor [AUDIO CONTROL] button Turning the power on/off Press the [PWR] button. 1 The power turns on or off each time the button is pressed. Wh...
Page 58 - If you have a question:
58 If you have a question: F i r s t c h e c k t h e i t e m s m e n t i o n e d b e l o w b e f o r e a t t e m p t i n g t otroubleshoot problems. If a problem occurs, for instance when the unit does not respondto any button presses, or the display doesn't work correctly,press the [RESET] button u...
Page 59 - Displayed information (for troubleshooting)
59 If you have a question: Displayed information (for troubleshooting) The information listed in the chart below is displayed to show thestatus of the CD player. Refer to the chart for the appropriate action. Information Code Table When "INFO " flashes on the indicator Nos.3,5 are displayed....
Page 62 - GENERAL; Specifications
62 Specifications < GENERAL > Power Supply 14.4V DC (11-16V) Current Drain 3A MAX Dimensions (W x H x D) In-Dash Unit 7" x 2" x 6-1/5" (178 x 50 x 158mm) Mass (weight) Approx. 1.4kg Usage temperature range -20°C to + 65°C (-4°F to 149°F ) Storage temperature range -40°C to + 85°C (...
Page 63 - Components; Before installation; Installation angle
63 Before installation No. Item Q'ty 1 Main unit 1 2 Mounting sleeve 1 3 Side bracket 2 4 Rear bracket 1 5 Bezel 1 6 Bushing 1 7 Self-tapping screw (6 x 16 mm) 2 8 Stud bolt 1 9 Flat head screw (5 x 8 mm) 4 10 Hex-head bolt (5 x 20 mm) 2 11 Hex nut (5 mm) 2 12 Interconnecting cable 1 Components Befo...
Page 64 - Mounting the main unit; Mounting instruction
64 Mounting instruction Mounting the main unit Insert the mounting sleeve into the opening in the vehicledash board or console box. 1 Use a screwdriver or the like to bend the tabs in themounting sleeve to secure the mounting sleeve. 2 Attach the side brackets to the main unit using flatheadscrews. ...
Page 65 - Mount the stud bolt to the main unit.
65 Mounting instruction Mount the stud bolt to the main unit. 4 Insert the main unit into the mounting sleeve until it locksin place. 5 Fasten the rear of the main unit using either method [A]or [B]. 6 Install the bezel on the main unit. 7 BEZEL 5 MOUNTING SLEEVE 2 STUD BOLT 8 BUSHING METAL OFVEHICL...
Page 66 - Names of lead wires and destinations (refer to Page 68)
66 Mounting instruction Names of lead wires and destinations (refer to Page 68) No. Name Wire color Destination 1 ACC Red Connect where the power comes onw h e n t h e i g n i t i o n i s i n t h e A C Cposition. 2 B+ Yellow C o n n e c t w h e r e t h e p o w e r i sconstantly available, regardless...
Page 67 - System
Page 69 - wer Amplifier
69 Mounting instruction INSULA TE EACH WIRE WITH T APE INSULA TE EACH WIRE WITH T APE TO SIGNAL INPUT OF AUXILIAR Y POWER AMPLIFIER CD3414 16P ANTENNA PLUG TO BA TTER Y + 12V (Per manent Supply) INTERCONNECTING CABLE 2 Y ellow Blue Orange/White Blue/White Black Red TO GROUND 3 FRONT 7 REAR 8 12 TO P...
Page 70 - AUSTRALIA; How to contact customer service
70 How to contact customer service S h o u l d t h e p r o d u c t r e q u i r e s e r v i c e , p l e a s e c o n t a c t y o u r n e a r e s tfollowing Eclipse dealer. < U.S.A/CANADA > DIVISION OF FUJITSU TEN CORP. OF AMERICA19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502Phone: (310) 327-2151...
Page 71 - KOREA
71 How to contact customer service < KOREA > HYUNDAI AUTONET Co., LTD.1st FL. Namhyoung Bldg, 746-23 Yeoksam-Dong, Kangnam-Ku,Seoul, Korea 135-080Phone: 02-508-6001Fax: 02-2-508-6067 Transpectra Co., Ltd.115-16 nonhyun dong kangnam ku Seoul, Korea.Phone: 02-540-4595Fax: 02-2-540-4666 < TAIW...
Page 72 - M e m o
72 M e m o • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Page 73 - IMPORTANT; RECORD YOUR “KEY CD”
IMPORTANT RECORD YOUR “KEY CD” HERE… STORE YOUR “KEY CD” ALONG WITH YOUR OWNER’S MANUAL IN YOUR SOCK DRAWER. 73
Page 74 - FUJITSU TEN LIMITED
090001-1455A700 0405 (Y.TS) CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD3414 for identification. The serial number is labeled or stamped on the chassis. Serial No. FUJITSU TEN LIMITED
