ECHO SHC-260 - Manual
ECHO SHC-260 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – IMPORTANT; WARNING; Hot Surface Decal
- Page 4 – Shaft Decal; Spanish Decal; English Translation; INTERNATIONAL
- Page 5 – Wear protective hair covering to contain long hair.
- Page 6 – Repetitive Stress Injuries; • Avoid using your wrist in a bent, extended, or twisted position.; EQUIPMENT; NOT operate unit if leaks are found.
- Page 7 – SAFE; Safety Manual for instructions on Safe Operation.; PRODUCT EMISSION DURABILITY; MISSION; EPA Phase 2
- Page 10 – DRIVE SHAFT ASSEMBLY - Contains the Flexible Drive Cable.
- Page 11 – PECIFICATIONS; Premium Universal 2-Stroke Oil
- Page 13 – THROTTLE; Close choke and remove air filter cover.
- Page 14 – Fuel Requirements; Mixing Instructions; Handling Fuel; After Refueling; Storage; - Fuel storage laws vary by
- Page 15 – PERATION; Close Choke
- Page 16 – STOPPING
- Page 17 – AINTENANCE; Easy to do. Most required tools come with unit.; ECHO offers REPOWER; HEDGE; Never remove hands from unit when blades are moving.
- Page 19 – AIR; Air & Fuel Filter Kit; Level 1; Air & Fuel Filter Kit; Remove the filter from the line and install the new filter.
- Page 20 – Parts Required: REPOWER; Adjust spark plug gap by bending outer electrode.; COOLING; Level 2; • Dust and grass build up on the outside of the cylinder. This build up
- Page 21 – Remove spark plug lead.; EXHAUST; Spark Arrestor Screen; Clean carbon deposits from muffler components.
- Page 22 – Cylinder Exhaust Port; Level 3; CARBURETOR; High Altitude Adjustment
- Page 23 – LUBRICATION; Blades; Gear Housing Assembly; ECHO; Lithium Based Grease.
- Page 24 – Drive Shaft Assembly; Install the gear housing assembly.
- Page 25 – SHARPENING; Disconnect spark plug wire from spark plug.; BLADE; Tighten blade bolts until snug, then loosen blade bolts 1/2 turn.
- Page 26 – ROUBLESHOOTING
- Page 27 – TORAGE; Store unit in a dry, dust free place, out of the reach of children.
S
HAFT
H
EDGE
C
LIPPER
O
PERATOR
'
S
M
ANUAL
1
WARNING
DANGER
Read rules for safe operation and instructions carefully. ECHO provides an Operator's
Manual and a Safety Manual. Both must be read and understood for proper and safe
operation. Failure to do so could result in serous injury.
Shaft Hedge Clipper
Operator's Manual
MODEL
SHC-260
Serial Number 06001001 - 06999999
X753001620
01/04
X7532094900
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
S HAFT H EDGE C LIPPER O PERATOR ' S M ANUAL 3 S AFETY DECALS Locate these safety decals on your unit. Make sure the decals arelegible and that you understand and follow the instructions on them.If a decal cannot be read, a new one can be ordered from your ECHOdealer. See PARTS ORDERING instructions...
4 Shaft Decal Spanish Decal WARNING DANGER This unit can be dangerousand cause serious injury ifimproperly used. To reducei n j u r y r i s k t o o p e r a t o r ,helpers and bystanders,read and understand theO p e r a t o r ' s a n d S a f e t yManuals, which are providedin Spanish. ADVERTENCIA PEL...
S HAFT H EDGE C LIPPER O PERATOR ' S M ANUAL 5 S AFETY I NSTRUCTIONS PERSONAL CONDITION AND SAFETY EQUIPMENT WARNING DANGER Hedge Clipper users risk injury to themselves and others if the hedge clipper is used improperly and or safetyprecautions are not followed. Proper clothing and safety gear must...
