Page 3 - Contents
Contents Overview of your Dyson washing machine The only 2-drum wash action Free registration Important safety notes Inner transit packaging removal Moving the washing machine Specification Location Drainage, water supply and electricity Drainage Water supply Electrical installation After installati...
Page 4 - Overview of your Dyson washing machine; Overview
Overview of your Dyson washing machine 1 01 Overview Outer door Control panel Soap tray Hot water inlet Cold water inlet Drainage hose hook Power cable & plug & Inner door Rating plate Adjustable feet Drainage hose & adjustable clip Rollerjack TM Coin trap 4 0 1 6 0 1 & 5 0 1 5 0 2 &...
Page 5 - Contrarotator
The only 2-drum wash action. Contrarotator TM Conventional washing machines may seem convenient, but their poor performance lets you down. So James Dyson asked his engineers to experiment with every imaginable way of washing to design a better washing machine. Along the way, Dyson engineers made a s...
Page 6 - Important safety notes; User Instructions; Dyson service
Always: • ensure that the feet are screwed into cabinet before using the Rollerjack TM to move the machine. Care should be taken when moving it, as it is very heavy. • turn off the machine with the ‘Mains on/off ’ button and switch off at the socket when not in use. • turn off the water supply to th...
Page 7 - Inner transit packaging removal; Before installation
7 Using the Dyson spanner remove the four bolts securing the top transit bracket. 8 Remove the four screws securing the bracket to the machine casing and lift out the transit bracket. • Refit the lid and two screws. To replace the packaging eg: for moving house , reverse the procedure described abov...
Page 8 - Location; Specification; Installation; Drainage, water supply and electricity
600 mm MAX. 450 mm MIN. 848 mm 595mm Dimensions Height 848mm Depth 575mm Width 595mm Weight: 103kg. Voltage: 220-240V, 50Hz. Please refer to rating plate (see section 01 for location). Power: 2750W 230V . Please refer to rating plate (see section 01 for location). Water pressure: 0.4-5 bar. Capacity...
Page 10 - After installation; Electrical installation
When all the instructions on the previous pages have been completed, the machine can be installed into its operating position using the Rollerjack TM handle (see section 01). • Using the Dyson spanner, adjust the two front feet so that the machine is perfectly stable and is touching the ground on al...
Page 11 - Operation; Loading the washing machine
Operation 6 01 • Ensure the machine is plugged into the mains and switched on at the socket. Check that the water supply is on at the mains. • Open the outer and inner doors. • Check the drums are empty before placing the sorted laundry into the washing machine. • Close both doors, making sure that ...
Page 12 - To start your wash cycle using the default settings; Starting your wash
1 2 Switch on the machine Select the programme Select Cotton/Synthetics/Wool/ Delicate/Handwash items or Duvet cycle. Temperature, spin and soil type settings will automatically adjust to the default settings to give the best options for the selected wash. Please see section 01 for details of how to...
Page 13 - Cancel your wash cycle
End of wash cycle The display will show ‘Programme finished’ once the cycle is complete. Remove the washing and turn off the machine by pressing the ‘Mains on/off ’ button. 3 Start your wash cycle Press to start your chosen programme. Pause your wash cycle To pause the wash, for example to add a for...
Page 14 - Optional settings; To personalise the default wash programmes
8 01 Optional settings To personalise the default wash programmes Adjust your programme After selecting the fabric type, press the temperature, spin and soil type buttons to scroll through the options and select your preferred settings. Note: on certain programmes some options are not available (see...
Page 15 - Start delay; Memory; Door lock
Start delay Selected models only This allows you to programme the wash to finish when you want it to. Use the and arrows to adjust the settings eg: if you want the wash to start in 10 hours time, press the arrow 10 times and press ‘Start’ to activate it. The display will countdown the delay time to ...
Page 16 - Fabric care and advice
Fabric care and advice 9 01 Wash tips Do not: • wash frayed or torn fabrics. • wash items unsuitable for washing machines e.g. trainers, shoes or rucksacks. Always: Care label • check the wash care label on laundry to select the most appropriate programme. If you are unsure of the care label, use a ...
Page 17 - Programme table
9 02 Programme table Care label Suggested programme Temperature Spin speed Soil type Options Maximum load Cotton 100% cottons Linen Synthetics Cotton mixes Mixed fibre Polycottons Fabrics with special finishes eg: ‘non-iron’ treated cotton Mixed fabric wash loads Printed cottons Polyester Wool Machi...
Page 18 - Maintenance
Self clean cycle (on selected models only) Cleaning Maintenance • The soap tray cavity in the machine should be cleaned out with a small, soft brush, taking care not to dislodge the rubber seal. • Replace the soap tray ensuring it ‘clicks’ into place. Do not: • wash the soap tray in a dishwasher. Ma...
Page 19 - Coin trap
Coin trap Maintenance 5 Remove any objects from the coin trap. 6 If any more items seem to be blocking the coin trap, pull out the flow accelerator cap. • Remove any items and firmly push the flow accelerator cap back into place. To replace the coin trap window: • Ensuring the seal is in place, lubr...
Page 20 - Emergency door release
Machi “Not emptying: check ho Emergency door release Water filter Maintenance This should be used in the event of a power cut to remove laundry. • Switch off and remove the plug from the socket. • Ensure the drums have stopped moving. • If the machine has been running on a hot wash, leave it to cool...
Page 21 - Troubleshooting
11 01 Troubleshooting LCD display is blank Machine displays “Overload reduced performance” Machine displays “Close inner door then press start” Certain spin speeds, temperatures, dirt levels cannot be selected Cannot open door Machine leaks water Machine shakes during the cycle Machine displays “Clo...
Page 22 - Symptom
Ensure the machine is plugged in andswitched on. Check the fuse and alsothat the circuit breaker has not tripped. (See section 02) for the programme options wash table. Wait for the machine to finish the cyclebefore opening the door. To cancel thewash hold down the ‘Cancel’ button. Press ‘Start’ to ...
Page 23 - LCD display message; dyson
11 03 Troubleshooting Child lock on Overload reduced performance Uneven load could not spin Close outer door then press start Close inner door then press start Not emptying: check hose andcoin trap Not filling: check water supply Fault The child lock has not been deactivated. The recommended wash lo...
Page 24 - For Dyson, call Dyson; Dyson Call Centre; G E N U I N E C O M P O N E N T S
For Dyson, call Dyson Made & Tested by Dyson Dyson Call Centre Helpline 8 till 8, every day UK 08705 275104 ROI (01) 475 7109 service@ dyson .co.uk www. dyson .com Dyson Ltd Tetbury Hill Malmesbury Wiltshire SN16 ORP JN.8887 30.10.03 PN.50351-04-01 G E N U I N E C O M P O N E N T S 8887_CRO2_OPS...
