Dyson 405863-01 - User Manual

Page 2 - In the box

In the box Your machine will come with one or more of these cleaner heads – not all will be included. Vacuum cleaner Laser Slim Fluffy™ cleaner head A precisely-angled laser makes invisible dust visible on hard floors. Motorbar™ cleaner head Deep cleans carpets and hard floors. De-tangling vanes aut...

Page 3 - Getting started

Getting started Power modes Your machine has three power modes for different tasks. Change power modes quickly using a single button. Eco mode Maximum run time for longer cleans all around your home. Auto and Med mode The optimum balance of power and run time. Attach your cleaner head or Hair screw ...

Page 4 - The LCD screen

The LCD screen The LCD screen shows your particle count information and performance, including the cleaning mode selected, remaining run time, filter maintenance and blockage information. Settings menu Control the settings on your machine using the button. To enter the settings menu, press and hold ...

Page 6 - Caring for your floors

Charging your machine It’s important to fully charge your new machine before using it for the first time, and after every clean. This is because the battery and monitoring system’s algorithm ‘learns’ over time, and fully charging your machine helps it to more accurately calculate and display remaini...

Page 8 - Clearing blockages

Clearing blockages Disconnect your machine from the charger before looking for blockages. Be careful not to touch the trigger and be aware of sharp objects. Leave your machine to cool down before looking for blockages. Don’t use your machine when looking for blockages as this could cause injury. Rem...

Page 9 - Washing your filter

Washing your filter Wash your filter at least once a month to maintain optimum suction power. For more information and support for your machine go online: www.dyson.com/support Important: your filter must be completely dry before you put it back into the machine. Your machine could be damaged if use...

Page 10 - Washing your Laser Slim FluffyTM brush bar

Washing your Laser Slim Fluffy™ brush bar Your Laser Slim Fluffy™ cleaner head has a washable brush bar. To maintain optimum performance, check and wash your brush bar regularly. Make sure your machine is disconnected from the charger and take care not to touch the trigger. 2 3 1 2 1 Remove your bru...

Page 11 - Cleaning your tools

Cleaning your tools Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Wipe with a damp, lint-free cloth, without touching the connector end. Make sure your tools are completely dry before using. Combination tool Crevice tool Extension hose Light pipe c...

Page 13 - Looking after your machine

Looking after your machine To always get the best performance from your machine, it’s important to clean it regularly and check for blockages. Look after your machine If your machine is dusty, wipe with a damp lint-free cloth. Check for blockages in the cleaner head, tools and main body of your mach...

Dyson 405863-01 - User Manual

Table of Contents:

Summary

Other Dyson Vacuums Models