Dynex DX-PS10CC - Manual

Setting up the shredder

1

Place the shredder head securely on the rim of

the supplied wastebasket.

Caution

: Crosscut shredders have very sharp,

exposed blades on the underside. Use care when
mounting the shredder to the wastebasket.

Note

: Do not use plastic bags to line the

wastebasket.

2

Connect the power cord to a power outlet.

3

Slide the POWER button from

Off

to

Auto

.

Using the shredder

Caution

: Do not insert more than 10 sheets of paper, one credit card, or

one disc at a time. You may damage the shredder.

To shred paper:

Insert paper into the shredder opening. When the
paper has passed through, the shredder will stop.

To shred CDs/DVDs:

Hold the CD/DVD by the edge and feed one at a
time, releasing when shredding begins. The
shredder stops when the entire disc has been
destroyed.

Caution

: Do not hold the CD/DVD with your finger through the center hole

while feeding it into the shredder. Serious injury may occur. Never feed
more than one credit card or CD/DVD at a time.

Note

: Never shred plastic (except credit cards, CDs or DVDs, and only by

inserting them one at a time), continuous forms, anything with adhesive
including labels and envelopes, newsprint, or any hard materials. While this
shredder will shred staples and small paperclips, it is recommended that
you remove them whenever possible in order to extend the life of your
shredder.

To shred credit cards:

Hold the credit card by the edge and feed one at a time, releasing when
shredding begins.The shredder will stop when the entire card has been
destroyed.

Features

LEDs

Power button

QUICK SETUP GUIDE

Crosscut Paper Shredder

DX-PS10CC

AUTO

The shredder starts automatically when an item is

inserted into the paper or disc slot. When the item has
passed through the slot, the shredder stops.

Caution

: Always feed paper in as straight as possible.

Caution

: Do not insert more than ten sheets of paper,

one credit card, or one disc at a time.

REV

Use the reverse setting to clear a paper jam or to pull out

unshredded paper.

Caution

: Never try to clear a jam by using REV when the

wastebasket is full. This could make the jam worse.

OFF

Turns off the shredder.

Warning

: Always turn off the shredder when it is not in

use.

Power

Lights green when the shredder is in use. Turns off when the shredder is in
standy-by (power-saving) mode.

Door Open

Lights yellow if the wastebasket is opened or the shredder head is not mounted
correctly.

Overheat/Overload Lights red when the shredder is jammed or overheated. You have inserted more

sheets of paper than recommended or the shredder has been used too long.
Please reduce the number of sheets or stop shredding until the light turns off.
Please reduce the number of sheets or stop shredding until the light turns off.