Page 2 - ii; Contents
ii Dynex DX-LDVD19-10A 19" LCD TV/DVD Combo Contents Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Cautions ....
Page 3 - iii
iii Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Setting parental control levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Downloading rating information . . . . . . . . . . . . . . . . . . . . . . ...
Page 4 - iv
iv DX-LDVD19-10A_09-0340.book Page iv Tuesday, April 28, 2009 4:43 PM
Page 5 - If you decide to wall mount your TV, always remember:; CHILD SAFETY; It makes a difference how and where you use
1 As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We an...
Page 6 - Important safety instructions; Warnings
2 Important safety instructions DX-LDVD19-10A Important safety instructions 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in a...
Page 7 - • If your TV does not operate normally by following the operating; Installing the stand; To install the stand:; Push the TV onto the base until the clips snap into place.; Removing the stand; Warning
Installing the stand 3 DX-LDVD19-10A • If your TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by ...
Page 8 - Make sure that you handle your TV very carefully when attempting; To remove the stand from the stand column:; Installing a wall-mount bracket; To attach your TV to a wall-mount bracket:; • Secure the wall-mount bracket to the back of your TV using the; TV components; Front and side panels; Component
4 TV components DX-LDVD19-10A Make sure that you handle your TV very carefully when attempting removal of the stand. If you are not sure of your ability to do this, or to use the tools necessary to complete this job, refer to a professional installer or service personnel. The manufacturer is not res...
Page 9 - Back; POWER
TV components 5 DX-LDVD19-10A Back Remote control ## Component Description 1 HDMI jack Connect an HDMI device, such as a cable box or DVD player, to this jack. An HDMI cable carries both video and audio, so you do not need to make an audio connection. For more information, see “Connecting an HDMI de...
Page 10 - Using the remote control; Installing remote control batteries; To install remote control batteries:; Do not mix different types of batteries.
6 Using the remote control DX-LDVD19-10A Using the remote control Installing remote control batteries To install remote control batteries: 1 Open the battery compartment cover by pressing the release button. 2 Insert two AA batteries into the battery compartment. Make sure that the + and – symbols o...
Page 11 - Aiming the remote control; To use the remote control:; • Point the remote control towards the remote sensor on the front; To program a universal remote control:; Universal remote control manufacturer and model
Using the remote control 7 DX-LDVD19-10A Remove the batteries if you do not intend to use the remote control for an extended amount of time. Do not dispose of batteries in a fire. Dispose of them as hazardous waste. Aiming the remote control To use the remote control: • Point the remote control towa...
Page 12 - Making connections; all connections are tight and secure.; Connecting the power; To connect the power:; not be using your TV for an extended period of time.; Connecting an antenna or cable TV; RF OUT; Do not bundle the 75 ohm cable with the power cord or other cables.; To connect to a cable TV or satellite TV box:; SATELLITE IN
8 Making connections DX-LDVD19-10A Making connections Cautions: Check the terminals for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. The external audio/video equipment shown in these ill...
Page 13 - Connecting a VCR; Some game consoles have an HDMI connector, which can be used for; To connect a camcorder or game:; Connecting an HDMI device; To connect an HDMI device:; If the external device has DVI output only, use a DVI-to-HDMI; V C R
Making connections 9 DX-LDVD19-10A Connecting a VCR To connect a VCR (option 1): 1 Make sure that your TV’s power cord is unplugged and the VCR is turned off. 2 Connect a 75 ohm RF wire to the ANT OUT jack on your VCR and to the ANT/CABLE IN jack on your TV (1), then switch the output of the VCR to ...
Page 14 - Turning on your TV for the first time; Connecting a component video device; To connect a component video device:; Connecting a computer; Some computers have an HDMI connector, which can be used for a; To connect a computer:; The audio cable should have a stereo mini plug.; To play video from a computer:; All above listed are subject to VESA criteria.; To turn on and configure your TV:; Channels; Mode
10 Turning on your TV for the first time DX-LDVD19-10A Connecting a component video device To connect a component video device: 1 Make sure that your TV’s power cord is unplugged and the component video device is turned off. 2 Connect a component video cable to the COMPONENT OUT jacks on the compone...
Page 15 - Auto Channels Search; Understanding the basics; Turning your TV on or off; When your TV is in standby mode, it is still receiving power. To; On-screen menu overview
Understanding the basics 11 DX-LDVD19-10A • Press CH+/CH- to highlight Auto Channels Search , then press ENTER/VOL+ The Auto Channels Search sub-menu opens. • Press CH+/CH- to select Antenna or Cable , then press ENTER . A checkmark appears in the circle next to your choice. • Press CH+/CH- to highl...
Page 16 - Navigating the menus; To adjust the volume:; Adjusting basic settings; To adjust basic settings:; Picture
12 Understanding the basics DX-LDVD19-10A Notes: Depending on the signal source selected, you may see different options on your screen. The above menus are shown in TV mode. Menu items that are not selectable are grayed out. Menus in this manual are described in TV mode, unless otherwise indicated. ...
Page 17 - Displaying additional information; To display additional information:; Adjusting the picture; Adjusting the TV picture; To adjust the picture:; and Sharpness if you set the Mode to Custom.; Adjusting the computer image; To adjust the computer image:; Settings
Adjusting the picture 13 DX-LDVD19-10A Displaying additional information To display additional information: • Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution. • Digital mode information—Disp...
Page 18 - Adjusting the sound; Adjusting the sound; Audio; Changing channel settings; Automatically scanning for channels; To auto scan for channels:; CHANNELS
14 Adjusting the sound DX-LDVD19-10A • V-Position —Moves the image up or down • Clock —Adjust the clock setting of the picture • Phase —Adjusts the focus of stable images • Reset Computer Settings —Resets computer settings to factory default 6 Press MENU to return to the previous menu, or press EXIT...
Page 19 - Adding or skipping channels; Setting up a favorite channel list; To set up the favorite channel list:; CH–
Changing channel settings 15 DX-LDVD19-10A All available channels are automatically preset in order. After the search is completed, the first channel number displays on the screen. This search automatically adds only the active channels in your area to the TV's memory. It deletes any channels on whi...
Page 20 - Adding or changing a channel label; VOL–; Checking the DTV signal strength; To check the DTV signal strength:; Listening to audio only; To listen to audio only:
16 Changing channel settings DX-LDVD19-10A Adding or changing a channel label If a channel is not already labeled, you can label the channel to make it easier to identify. You can also relabel a channel that is already labeled. To label a channel: 1 Press MENU . The on-screen menu opens. 2 Press VOL...
Page 21 - If Audio Only is set to; Turning on Auto Zoom; To turn on Auto Zoom:; Setting parental controls; Changing parental control settings; To change parental control settings:
Setting parental controls 17 DX-LDVD19-10A 3 Press CH+ or CH– to highlight Audio Only , press ENTER/VOL+ to open sub-menu, then press CH+/- to select On . 4 Press EXIT to close the menu. Notes: If Audio Only is set to On , the backlight should automatically turn off 5 seconds after last remote comma...
Page 22 - Setting or changing the password; To set the parental control password:; Setting parental control levels; To set parental controls:
18 Setting parental controls DX-LDVD19-10A • Button Lock —Set to On to lock the buttons on the front of the TV. • Block Unrated TV —Set to On to block TV programs that are not rated. • USA Parental Locks —Select this sub-menu to change US parent lock settings. See “Setting parental control levels” o...
Page 23 - Enter Password; Select; Downloading rating information; To download rating information:; Canadian English ratings
Setting parental controls 19 DX-LDVD19-10A 3 Press CH+ or CH– to highlight Parental Controls , then press ENTER/VOL+ . The Enter Password screen opens. 4 Press the number buttons to enter the four-digit password. The default password is 0000 . The Parental Controls sub-menu opens. 5 Press CH+ or CH–...
Page 24 - Using closed captioning; Turning closed captioning on or off; To turn closed captioning on or off:
20 Using closed captioning DX-LDVD19-10A 2 Press VOL+ or VOL– to highlight SETTINGS , then press ENTER/CH– . The Settings menu opens. 3 Press CH+ or CH– to highlight Parental Controls , then press ENTER/VOL+ . The Enter Password screen opens. 4 Press the number buttons to enter the four-digit passwo...
Page 25 - You can also press; Adjusting time settings; Setting the clock; Setting the sleep timer; To set the sleep timer:
Adjusting time settings 21 DX-LDVD19-10A • Digital CC Settings —To change digital closed caption settings. Options include: • Style –Select either Automatic or Custom . When you select automatic, the others are disabled and cannot be adjusted. • Size –To select the size of the caption displayed. • F...
Page 26 - To turn off the sleep timer, select; Adjusting menu settings; To select the on-screen menu language and menu transparency:; Labeling an input source; To label an input source:
22 Adjusting menu settings DX-LDVD19-10A 3 Press CH+ or CH– to highlight Time , then press ENTER/VOL+ . The Time menu opens. 4 Press CH– to highlight Sleep Timer , then press ENTER/VOL+ . The Sleep Timer setting box opens. 5 Press CH+ or CH– to select the time interval that you want your TV to remai...
Page 27 - DVD Playback; Basic playback; To load and play a DVD:; Advanced playback; JPEG disc playback
DVD Playback 23 DX-LDVD19-10A 4 Press CH+ or CH– to highlight an option, then press VOL+ or VOL– to change the setting. Options include: • Input –To select the input to label. • Label –To select the label. Options include: • Custom –Select this option to input your own label. • VCR • DVD • Set Top B...
Page 28 - Screen saver; GENERAL SETUP; DVD system setup; Accessing the general DVD setup; To access the general DVD setup:; To make changes to the general DVD setup:; General Setup Page; To make changes to the Preference Page:; Preference Page; Notes
24 DVD Playback DX-LDVD19-10A Press PREV or NEXT to move between pictures. Press PAUSE to stop on the current picture. Press PLAY/ENTER to resume normal playback. Screen saver This TV employs a screen saver mode to help protect the screen during static video pictures. This can be turned off on the G...
Page 29 - OFF; Password; Default; Playable discs; Troubleshooting; Video and audio; MUTE
Troubleshooting 25 DX-LDVD19-10A To change this setting you must enter your password. (The initial password is 1234 .) When parental controls are set to OFF , all discs may be viewed. • Password —You can change your password by entering the old, four digit password, then entering the new, four digit...
Page 30 - General; Maintenance; Cleaning; Handling discs; Servicing; Specifications; Problem
26 Maintenance DX-LDVD19-10A General Note : If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Maintenance Cleaning • Before cleaning the screen, unplug your TV from the power outlet. • Clean your TV with a soft, dry cloth. If surfaces ...
Page 31 - Legal notices; that to which the receiver is connected.
Legal notices 27 DX-LDVD19-10A Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including ...
Page 33 - One-year limited warranty; How long does the coverage last?
Legal notices 29 DX-LDVD19-10A One-year limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-LDVD19-10A (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the ...