Dynex DX-IPDR - Manual
Dynex DX-IPDR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Using your docking station; Replacing the battery
- Page 3 – Pour...; Utilisation de la station d’accueil
- Page 4 – Utilisation de la télécommande pour; Avertissements
- Page 5 – Contenido de la caja; Instalación; Para...; Conexión a un TV con un cable de S-Video o A/V
iPod® Docking Station with Remote
Station d’accueil iPod® avec télécommande
Estación de Acoplamiento iPod® con Control
Remoto
DX-IPDR
USER GUIDE
GUIDE DE L’UTILISATEUR I GUÍA DEL USUARIO
Box Contents
• Docking
station
•
AC power adapter
•
AV cable (5 feet)
•
Sync cable (6 feet)
•
S-Video cable (6 feet)
•
Universal dock adapter (8)
• Remote
control
Setting Up
Connecting your iPod to the docking station
1 Connect the universal
dock adapter
appropriate for your
iPod to the docking
station.
For…
Use this adapter…
iPod Mini (4 GB/6 GB)
3
iPod (20 GB/U2 Special Edition)
4
iPod (40 GB)
5
iPod with color display (20 GB/30
GB/U2 Special Edition)
6
iPod with color display (40 GB/60 GB)
7
iPod Nano
8
iPod Video (30 GB)
9
iPod Video (60 GB)
10
2
Place your iPod in the docking station.
3
Remove the plastic tab on the remote control before
using the fi rst time.
Connecting to a TV using the S-Video or A/V
cable
1 To connect S-Video,
plug the S-Video
cable into the docking
station and your TV.
2 To connect standard
video, connect the A/V
cable into the docking
station’s 3.5mm
auxiliary jack, then
connect the yellow
RCA plug to your TV’s
yellow Video In jack.
Connecting to an external audio device
1 To connect external
audio, connect the
A/V cable into the
docking station’s
3.5mm auxiliary jack,
then connect the red
and white RCA plugs to
your audio device’s red
and white Audio In jacks.
Connecting power using the USB sync cable
1 Plug the AC power
adapter into an AC
power outlet.
2 Plug the USB sync
cable into the USB
port on the AC power
adapter and the 30-pin
connector on the back of your docking station.
3 You may control your iPod charging mode using the
ON/OFF switch located on the side of your docking
station.
A/V cable S-Video cable
A/V cable S-Video cable
DX-IPDR.indd 1
DX-IPDR.indd 1
4/22/2006 11:43:02 AM
4/22/2006 11:43:02 AM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 The LED turns green to indicate that the docking station is charging your iPod. If you turn the ON/OFF switch off , the LED turns off . 5 Your iPod works normally whether the ON/OFF switch is on or off . Using your docking station Synchronizing with your computer 1 Plug the sync cable’s 30-pin connec...
Contenu de la boîte • Station d’accueil • Adaptateur d’alimentation CA • Câble AV 1,5 m (5 pi) • Câble de synchronisation 1,8 m (6 pi) • Câble S-Vidéo 1,8 m (6 pi) • Adaptateur universel de station d’accueil 2,4 m (8 pi) • Télécommande Installation Connexion de l’iPod à la station d’accueil 1 Connec...
Remarque : En général, la durée de service d’une pile est d’environ un an. Remplacez la pile si la télécommande ne fonctionne plus ou si la pile est épuisée (cf. Remplacement de la pile ). Conseil : Retirez les piles si vous n’allez pas utiliser la télécommande pendant une période prolongée. Utilisa...
