Dynex DX-GB5PRT - Manual
Dynex DX-GB5PRT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Network
storage
PC
Switch
Router
Modem
Internet
Internet
Modem
Router
Switch
Internet
Power cord
Switch
Power
outlet
PC
Switch
Network
storage
DX-GB5PRT
5-Port Gigabit Ethernet Switch
Congratulations on your purchase of the DX-GB5PRT Dynex 5-Port
Gigabit Ethernet Switch. The DX-GB5PRT provides increased speed and
backbone connections to make Gigabyte a reality.
Safety Notices
• Do not use this product near water, for example, in a wet basement
or near a swimming pool.
• Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not place heavy objects on the switch.
• Allow room for adequate ventilation.
Package contents
• DX-GB5PRT Dynex 5-Port Gigabit Ethernet Switch
•
Quick Setup Guide
Features
• Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p
standards
• Five 10/100/1000M RJ45 ports
• Supports IEEE 802.1p QoS
• Support Green Ethernet technology to implement power saving
features. (In Low Power Idle mode, up to 61.5% of the power can be
saved.)
• Supports IEEE 802.3x flow control for full-duplex mode and
backpressure for half-duplex mode
• Non-blocking switching architecture that forwards and filters
packets at full wire-speed for maximum throughput
• 8K entry MAC address table of the DX-GB5PRT with auto-learning
and auto-aging
• Supports for Jumbo frames of up to 15 KB
• LED indicators for monitoring power, link, and activity
Components
Front panel
Back panel
QUICK SETUP GUIDE
Installing the switch
1
Connect the power adapter to the switch and power outlet.
2
Connect the PC(s) and other device(s) to the switch.
3
Connect the switch to the Internet.
4
Install complete connection.
LED indicators
When the switch is plugged in and receiving power, the LED indicators
respond as follows:
LED
Power
Link/Act
Ports 1-5
Status
On (green)
Off
On (orange)
Flashing (orange)
On (green)
Flashing (green)
Indication
Power on
No device is connected to the corresponding port.
A 10/100 Mbps device is connected to the corresponding port.
A 10/100 Mbps device is transmitting or receiving data
through the corresponding port.
A 1000Mbps device is connected to the corresponding port.
A 1000Mbps device is transmitting or receiving data through
the corresponding port.
Power port
Ports 1-5
Power LED
LEDs 1-5
DX-GB5PRT_10-1123_QSG_V1.eps 1 10/29/2010 10:16:02 AM
DX-GB5PRT_10-1123_QSG_V1.eps 1 10/29/2010 10:16:02 AM
V1
FINAL
FOR PRINT
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
