Dynex DX-EBDTC - Manual

Wireless Enhanced G Desktop Card

Carte sans fil G amélioré pour ordinateur

Tarjeta Inalámbrica G Mejorado para PC de Escritorio

DX-EBDTC

P75509-A 07-721

QUICK INSTALL GUIDE

Guide d’installation rapide • Guía de instalación rápida

3

Connect to a network

Connectez à un réseau • Conecte a una red

1. Select your network from the

Available Networks

list, then click Connect. If you do not have security

enabled, you will connect to your network automatically. If you do have security enabled, go to

Step 2 below.

Note:

Only click

Connect

once. The connection process will begin even though the button appears

unselected.

Note:

If the Dynex Wireless Networking Utility did not open automatically, double-click the Wireless

Utility icon in the system tray near the clock.

2. A. If you have security enabled and you have a Dynex wireless router, you will be prompted to enter

a password

OR

B. If you have security enabled and you do not have a Dynex wireless router, the

Connect to a secure

network

screen opens. Enter the encryption key you created when you set up your wireless router,

then click Connect. The computer will connect to the network and the

Dynex Wireless Networking

Utility

will display the connection status.

Windows Vista® Users: Connect to a wireless network through the Network and Sharing Center,

accessible through your computer’s Control Panel.

1. Select your network from the

Available Networks

list, then click Connect. If you do not have security

enabled, you will connect to your network automatically. If you do have security enabled, go to

Step 2 below.

Note:

Only click

Connect

once. The connection process will begin even though the button appears

unselected.

Note:

If the Dynex Wireless Networking Utility did not open automatically, double-click the Wireless

Utility icon in the system tray near the clock.

2. A. If you have security enabled and you have a Dynex wireless router, you will be prompted to enter

a password

OR

B. If you have security enabled and you do not have a Dynex wireless router, the

Connect to a secure

network

screen opens. Enter the encryption key you created when you set up your wireless router,

then click Connect. The computer will connect to the network and the

Dynex Wireless Networking

Utility

will display the connection status.

Windows Vista® Users: Connect to a wireless network through the Network and Sharing Center,

accessible through your computer’s Control Panel.

1. Select your network from the

Available Networks

list, then click Connect. If you do not have security

enabled, you will connect to your network automatically. If you do have security enabled, go to

Step 2 below.

Note:

Only click

Connect

once. The connection process will begin even though the button appears

unselected.

Note:

If the Dynex Wireless Networking Utility did not open automatically, double-click the Wireless

Utility icon in the system tray near the clock.

2. A. If you have security enabled and you have a Dynex wireless router, you will be prompted to enter

a password

OR

B. If you have security enabled and you do not have a Dynex wireless router, the

Connect to a secure

network

screen opens. Enter the encryption key you created when you set up your wireless router,

then click Connect. The computer will connect to the network and the

Dynex Wireless Networking

Utility

will display the connection status.

Windows Vista® Users: Connect to a wireless network through the Network and Sharing Center,

accessible through your computer’s Control Panel.

2B

2B

DX-EBDTC_07-721_SIDE1 Final PRESPage 1 4/10/2008 12:25:41 PM