Dynalock 3101C - Installation Manual
Dynalock 3101C Security System – Installation Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION INSTRUCTIONS; DELAYED; MODEL #3101C BILL OF MATERIALS; Armature Spring; ITEM
- Page 3 – *These items are available from DynaLock.; MOUNTING CONSIDERATIONS; NORMAL; USING THE TEMPLATE; Fold the template on the dotted line to form a 90 degree; REQUIRED
- Page 4 – the screws with a #2 phillips screw driver.; MOUNTING THE ARMATURE ASSEMBLY; Failure to properly secure the
- Page 5 – MOUNTING THE LOCK
- Page 6 – Bi-color LED, mounted to circuit board housing cover.; - System Selector Switches; The selector switches (S3) which control major system
- Page 7 – BASIC WIRING; OR CIRCUIT BOARD DAMAGE WILL OCCUR.; PROPER OPERATION OF THE 3101C REQUIRES; POWER; A power limited, UL Listed power supply for security
- Page 8 – EGRESS SENSOR ADJUSTMENT; door to ensure the LED remains lit.; DOOR CLOSED AND LATCHED
- Page 9 – INDICATOR & AUDIBLE DESCRIPTIONS; POSITION; CONDITION; Steady tone until fire alarm
- Page 10 – address your specific system requirements.
- Page 11 – OPTION WIRING; REMOTE BYPASS INPUT; across terminals 7 & 8 will immediately release the; REMOTE RESET INPUT; across terminals 11 & 12 will initiate delayed egress.; INPUT DESCRIPTIONS; REMOTE BYPASS INPUT TIME DELAY; Momentarily closing a normally-open dry contact across; For NFPA101 applications, the remote
- Page 12 – DELAY EGRESS OUTPUT; TYPICAL WIRING
- Page 13 – FACTORY WIRING
- Page 14 – EXPLODED PARTS VIEW; LEGEND ON
- Page 15 – EXPLODED PARTS VIEW LEGEND
- Page 16 – FOR PRODUCT SUPPORT AND PARTS; AUXILIARY LOCK
Page 1
3101C MANUAL
04/13
INSTALLATION INSTRUCTIONS
705 Emmett Street Bristol, CT 06010
1-877-DynaLock www.dynalock.com
3101C
DELAYED
EGRESS LOCK
The 3101C Delay Egress System is a 1500 pound
holding force (holding force not evaluated by UL)
electromagnetic lock electronically controlled to
provide a 15 or 30 second delay in unlocking.
The 3101C requires both mechanical and electrical
installation procedures as described herein.
When completed, a simple adjustment procedure to
set door movement will finalize the installation.
INSTALLATION DESCRIPTION
ELECTRICAL INSTALLATION
After mechanical installation is complete the 3101C needs to be wired and adjusted. A continuous power source, 12
or 24 VDC or VAC is required. Once low voltage power is supplied the unit is fully operational. Delay egress systems
also normally require fire panel tie-in. All other wiring is for selected options.
NOTE: Please see Egress Sensor Adjustment (page 8)
before
applying power.
Familiarize yourself with the door and frame conditions. The lock must mount rigidly to the underside of the door
frame header and against the vertical strike jamb. The door mounted armature is supplied with hardware that allows
it to pivot slightly and pull away from the door as part of the delayed egress function.
NOTE: This lock does not change hands to match the hand of the door. Do not remove the coil assembly
from the lock housing.
NOTE: For locks ordered with the DSM option, please verify that two magnets are installed inside the
armature housing.
MECHANICAL INSTALLATION
The electromagnetic lock and armature are ruggedly constructed and designed to provide years of trouble-free
service. Care must be taken during installation and use, so that the lock face and armature face are kept free of dirt,
rust, paint, or any other obstruction which may interfere with the lock and armature making good contact.
HANDLING
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Dynalock
- Model
- 3101C
- Document type
- Installation Manual
- Category
- Security System
- Language(s)
- English
- Pages
- 16
- Format
Summary
Page 2 3101C MANUAL 04/13 INSTALLATION INSTRUCTIONS 705 Emmett Street Bristol, CT 06010 1-877-DynaLock www.dynalock.com 3101C DELAYED EGRESS LOCK MODEL #3101C BILL OF MATERIALS (1) 3101C LOCK ASSEMBLY (1) ARMATURE (1) ARMATURE HOUSING (1) ARMATURE MOUNTING PLATE ASSEMBLY (1) HARDWARE KIT (1) DOOR SI...
Page 3 3101C MANUAL 04/13 INSTALLATION INSTRUCTIONS 705 Emmett Street Bristol, CT 06010 1-877-DynaLock www.dynalock.com 3101C DELAYED EGRESS LOCK Inspect the door frame and determine if an angle bracket, spacer or filler plate will be required for installation. The lock will require a 2-9/16” wide h...
Page 4 3101C MANUAL 04/13 INSTALLATION INSTRUCTIONS 705 Emmett Street Bristol, CT 06010 1-877-DynaLock www.dynalock.com 3101C DELAYED EGRESS LOCK Using the four #10 x 1” flat head sheet metal screws attach the armature mounting plate to the door. Firmly tighten the screws with a #2 phillips screw dr...