Dyna-Glo RMC-FA150NGDGD - User Manual
Dyna-Glo RMC-FA150NGDGD Heater – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING; For more information go to; DANGER; Delux Natural Gas; NEVER LEAVE THE HEATER
- Page 3 – Principals of Operation
- Page 5 – Maintenance; Storage
- Page 6 – Wiring Diagrams
- Page 7 – Repair Parts List for Natural Gas Construction Heater
- Page 8 – Troubleshooting Chart
- Page 9 – Air Quality Hazard
- Page 10 – Warranty
- Page 11 – WARRANTY REGISTRATION
Printed in China
Dyna-Glo
®
Delux Natural
Gas Construction Heater
Operating Instructions & Parts Manual
RMC-FA150NGDGD
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and
others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for
future reference.
Description
Dyna-Glo Delux model RMC-FA150NGDGD is a natural gas fired construction
heater, having a built-in thermostat, and a 150,000 BTU/Hr rating. The heater
uses natural gas for com bustion and electricity to operate the motor and fan.
It is primarily to be used to temporarily heat well-ventilated buildings under
construction, alteration or repair. This heater should be utilized in sheltered, well-
ventilated areas, but never in occupied dwellings.
Specifications
Figure 1 – Model RMC-FA150NGDGD
Manifold
Maximum Supply
Minimum Supply
Temperature
Model
Pressure
Pressure to Heater
Pressure to Heater
Control
RMC-FA150NGDGD
4” W.C.
1/2 PSI
5” W.C.
Built-In Thermostat
Spark Plug
Size
Model
Ignition
Gap (Inches)
L x W x H (Inches)
RMC-FA150NGDGD
Continuous spark
.12
25 x 9.4 x 15.0
(3.05 mm)
(63.5 x 23.9 x 38.1 cm)
PROFESSIONAL GRADE
Table of Contents
Page
Description . . . . . . . . . . . . . . . . . . . . . . .1
Specifications. . . . . . . . . . . . . . . . . . . . . .1
Unpacking . . . . . . . . . . . . . . . . . . . . . . . 1
General Safety Information . . . . . . . . 1-3
Principals of Operation. . . . . . . . . . . . . .3
Ventilation. . . . . . . . . . . . . . . . . . . . . . . .3
Installation. . . . . . . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . . . . . . . .4
Maintenance . . . . . . . . . . . . . . . . . . . . 4-5
Storage . . . . . . . . . . . . . . . . . . . . . . . . . .5
Wiring Diagram. . . . . . . . . . . . . . . . . . . .6
Repair Parts Illustration . . . . . . . . . . . . .7
Repair Parts List. . . . . . . . . . . . . . . . . . . .7
Troubleshooting Chart . . . . . . . . . . . . . .8
Air Quality Hazard . . . . . . . . . . . . . . . . .9
Warranty . . . . . . . . . . . . . . . . . . . . . . . .10
Unpacking
1. Unpack all materials used to protect
the heater inside of carton. Retain
plastic caps attached to exposed
fittings for use during storage.
2. Remove heater, accessories and all
hardware from carton.
3. Inspect all items for damage that may
have occurred during shipment.
Important Safety Information
Make certain you read and understand
all warnings. Keep these instructions for
reference. They are your guide to safe
and proper operation of this heater.
Safety information appears throughout
these instructions. Pay close attention
to them. Below are definitions for the
safety information listed throughout
this manual.
DANGER
Indicates an
im minen tly
hazardous situation which, if not
avoided, WILL result in death or serious
injury.
WARNING
Indicates a poten
tially hazardous
situation which, if not avoided, COULD
result in death or serious injury.
CAUTION
Indicates a poten
tially hazardous
situa tion which, if not avoided, MAY
result in minor or moderate injury.
IMPORTANT: Not every possible cir-
cumstance that might involve a hazard
can be anticipated. The warnings in this
manual and on tags or decals affixed to
the unit are therefore not all-inclusive.
If a procedure, work method, or oper-
ating technique not specifically recom-
mend ed by is used, you must make sure
it is safe for you and others.
You should also ensure that equipment
will not be damaged or made unsafe by
the operating or maintenance method
you choose.
Consumer: Retain this manual for future
reference.
Output Rating
Fuel
Hot Air Output
Electric Motor
Model
BTU/Hr
Fuel
Consumption
(CFM Approx)
Motor
Input
Amperage
RMC-FA150NGDGD 150,000
Natural Gas Only 146 Cubic ft/h
435
3440 RPM 120V/60Hz, 1/9 HP 0.7
(4.13
m
3
/h)
ANS Z83.7-2017 CSA 2.14-2017 Construction Heater
IMNGF150DGD - MMD
C US
US
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Important Safety Information (Continued) WARNING General Hazard Warn ing: Failure to comply with the precautions and instructions provided with this heater can result in death, serious bodily injury, and property loss, or damage from hazards of fire, explosion, burn, asphyx iation, carbon monoxide p...
Code. ANSI/NFPA 70 or in Canada CSA C22.1, Canadian Electrical Code, Part 1. Use only a properly grounded three (3) prong receptacle. – Do not restrict inlet or outlet by any means. The flow of combustion and ventilation air is not to be obstructed. – This heater should not be directed toward any pr...
PROFESSIONAL GRADE 5 Model RMC-FA150NGDGD Dyna-Glo Delux Operating Instructions and Parts Manual For Technical Support or Troubleshooting, Call: 1-877-447-4768, 8:30 am - 4:30 pm CST www.ghpgroupinc.com NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING! 6. Rotate on/off switch to the ON (I) position. ...
