Dyna-Glo RA125LPDGD - User Manual

Dyna-Glo RA125LPDGD

Dyna-Glo RA125LPDGD Heater – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
Page: / 10
Loading the manual

Printed in China

Unpacking

1. Remove heater, accessories and all

hardware from the shipping carton.

NOTE:

Save the box and packaging

materials for future use. After
unpacking unit, inspect carefully for any
damage that may have occurred during
transit. Check for loose, missing or
damaged parts. Shipping damage claim
must be filed with carrier.

General Safety Information

Make sure you read and thoroughly
understand these safety and operating
instructions. Keep these instructions for
future reference. They are your guides
to safe and proper operation of this
heater.

Safety information appears throughout
this manual. Pay close attention to
them. Below are definitions for the
safety information listed throughout
this manual.

DANGER

Indicates an

imminently

hazardous situation which, if not

avoided, WILL result in death or

serious injury.

WARNING

Indicates a

potentially

hazardous situation which, if not

avoided, COULD result in death or serious

injury.

CAUTION

Indicates a

potentially

hazardous situation which, if not

avoided, MAY result in minor or

moderate injury.

WARNING

Always turn off

heater at control

knob and then close LP cylinder when not

in use.

WARNING

Do not operate this

heater until you have

read, and thoroughly understand these

safety and operating instructions. Failure

to comply with the precautions and

instructions provided with this heater can

result in death, serious bodily injury,

property loss or damage from the

hazards of fire, explosion, burns, or

electrical shock. Only persons who can

read and understand these instructions

should use or service this heater. Not for

residential, household or recreational

vehicle use. Please read this manual.

Consumer:

Retain this manual for

future reference.

Dyna-Glo

®

Delux Propane

Gas-Fired Radiant Heater

Operating Instructions & Parts Manual

RA125LPDGD

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and
others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for
future reference.

Fuel Consumption Manifold

Inlet Gas Supply

Dimensions

Model

BTU/Hr Maximum

Pressure

Pressure

Ignitor Gap L x W x H (in.)

RA125LPDGD 50,000 to 5.77 lb/h

11” W.C.

Min. 5 psi

0.19“

16.3 x 16.3 x 29.8

125,000

Max. Bottle Pressure

Fuel Type – Propane Only

Ignition Type – Piezo

Minimum Operating Temp. – -20°F (-29°C)

Specifications

Figure 1 – Model

RA125LPDGD

PROFESSIONAL GRADE

GHP Group, Inc.

6440 W Howard St

Niles, IL 60714

ANS Z83.7-2011 CSA 2.14-2011 Construction Heater

C US

C US

Description

Dyna-Glo Delux Model RA125LPDGD heater is a 125,000 BTU/Hr construction
heater. This heater uses propane gas for combustion. It is primarily intended for
temporary heating of well-ventilated buildings under construction, alteration
or repair. This heater should be utilized in sheltered, well-ventilated areas,
but never in occupied dwellings.

(2.62 kg/h)

(4.88 mm)

(41.4 x 41.4 x 75.7 cm)

IMLPRDGD - KEJ

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Dyna-Glo Heaters Models

All Dyna-Glo Heaters