Dymo 4XL - Manual

About Labels 4 Loading Labels Each label roll comes in a black plastic bag. Make sure to store the label roll in this bag when the labels are not being used. Important! In order for the labels to feed properly during printing, pay attention to the following when loading labels on the spool and into ...

Ordering Labels 5 Ordering Labels DYMO offers a full range of labels for the LabelWriter printers, including labels suited for addressing envelopes, shipping packages, naming file folders, labeling all sorts of media, printing name badges, and much more. A complete listing can be found in the label ...

7 Chapter 3 Caring for Your Printer The LabelWriter printer is designed to give you long and trouble-free service, while requiring very little maintenance. You will get the best possible performance from your LabelWriter printer if you follow the setup instructions that appear in the Quick Start Gui...

9 Chapter 4 Getting Help Your LabelWriter printer should offer years of trouble-free printing with very little maintenance. However, in the event that you encounter a problem, this chapter offers suggestions for resolving problems that can occur when using the printer. If you are unable to solve a p...

Limited Warranty 11 4 (Windows) Check that your LabelWriter printer driver is installed correctly. The LabelWriter printer driver takes print data from your software and directs it to the LabelWriter printer. The driver is automatically installed when you install the software that comes with your pr...

Getting Help 12 Returning Your Printer for Repair In order to claim warranty coverage, a dated proof of purchase for the printer is required. You can obtain warranty service by contacting DYMO's Technical Support department for a return authorization number (RA). Products sent to DYMO for repair wit...

13 Chapter 5 Technical and Environmental Information This chapter contains technical and certification information for the LabelWriter 4XL printer. Technical Specifications LabelWriter 4XL Print Method Direct Thermal Print Resolution 300 dots per inch (11.8 dots per mm) Print Speed (labels/min for a...

Technical and Environmental Information 14 Declaration of Conformity Description: Direct Thermal PrinterModel: DYMO LabelWriter 4XL This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC (Federal Communications Committee) rules...

Documentation Feedback 15 IEC61000-4-5-1995 Surge ImmunityIEC61000-4-6-1996 Conducted RF ImmunityIEC61000-4-3-1996 Conducted RF ImmunityIEC61000-4-8-1993 Power Frequency Magnetic Field Immunity TestIEC61000-4-11-1994 Voltage Dips and Interruptions Immunity on AC MainsEN61000-3-2:2000 Power Harmonics...