Page 2 - LCD Projector; U S E R ' S M A N U A L; CONTENTS; Thank you for purchasing this projector.; TRADEMARK ACKNOWLEDGEMENT :
1 LCD Projector 8062/8802 U S E R ' S M A N U A L U S E R ' S M A N U A L Vol.1 (Basic) Page PROJECTOR FEATURES ................2PREPARATIONS ..............................2PART NAMES ...................................4SETTING UPTHE PROJECTOR ............................6CONNECTINGYOUR DEVICES........
Page 3 - Whisper Mode Equipped; PREPARATIONS; Safety Instructions; PROJECTOR
2 ● Ultra High Brightness Crisp, ultra-bright presentations is achievedby using a UHB (ultra high brightness) lampand a highly efficient optical system ● Partial Magnification Function Interesting parts of images can be magnifiedfor closer viewing ● Keystone Distortion Correction Quick correction of...
Page 4 - WARNING; Precautions to observe in regards to the power cord:
3 1 Connect your devices to the projector Connect your computer, VCR and/or otherdevices you will be using to the projector. Insert the batteries into the remotecontrol 2 13 3 Connect the power cord (1) Connect the connector of the electrical power cord to the AC inlet of the main unit. (2) Firmly p...
Page 5 - PART NAMES; THE PROJECTOR
STANDBY/ON INPUT KEYSTONE RESET LANP TENP POWER 4 PART NAMES THE PROJECTOR Zoom ring 15 Focus ring 15 Air filter 27 Elevator button 6 Elevator button 6 KEYSTONE button 20 STANDBY/ON button 14 INPUT button 15 RESET button 24 STA NDB Y/O N INPUT KEY STO NE RESET LANP TENP POWER MENU button 23 LAMP ind...
Page 6 - THE REMOTE CONTROL
5 THE REMOTE CONTROL STANDBY/ON button 14 VIDEO button 15 MENU button 23 RGB button 15 BLANK button 22 SEARCH button 22 VOLUME button 17 MUTE button 17 KEYSTONE button 20 ASPECT button 22 AUTO button 19 MAGNIFY buttons 21 KEYBOARD buttons 24 FREEZE button 21 POSITION button 18 ESC button 23 , , , Cu...
Page 7 - Adjusting the Projector's Elevator Feet; CAUTION; of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.; SETTING UP THE PROJECTOR
6 Adjusting the Projector's Elevator Feet 1 P r e s s a n d h o l d i n t h e e l e v a t o rbuttons 2 Raise or lower the projector to thedesired height and then release theelevator buttons When you release the elevator buttons, the elevatorfeet will lock into position. 3 As necessary, you can also ...
Page 8 - Adjusting the Screen Size and Projection Distance; Top view; The screen; Side view
7 Refer to the illustrations and tables below to determine the screen size andprojection distance. Adjusting the Screen Size and Projection Distance Top view a c b Lens center The screen Side view Top view a c b Lens center The screen Side view If 4:3 aspect ratio If 16:9 aspect ratio 4 3 9 16 The v...
Page 9 - ATTENTION; CONNECTING YOUR DEVICES
8 Display monitors 12 DVD players 11 VCRs 11 Laptop computers 10 Desktop computers 10 Indicates thecorrespondingreference page ATTENTION Precautions to observe when connecting other devices to the projector • Whenever attempting to connect other devices to the projector, please thoroughly read the m...
Page 10 - Ports and Cables; NOTE
9 Ports and Cables Refer to the table below to find out which projector port and cable to use for connecting agiven device. Use this table for determining which cables to prepare. About Plug-and-Play Capability • This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by conne...
Page 11 - Laptop computer; Desktop computer; Connecting to a Computer; modes will not be possible with this projector.
10 B A AUDIO IN COMPONENT VIIDEO R L / (MONO) VIDEO IN C R / R R C B / P B Y K S-VIDEO IN USB 1 RGB IN 2 RGB OUT CONTROL A B B AUDIO IN AUDIO cable RGB cable AUDIO OUT RGB IN Analogue RGB OUT Laptop computer B A D C AUDIO IN COMPONENT VIIDEO R L / (MONO) VIDEO IN C R / R R C B / P B Y K S-VIDEO IN U...
Page 12 - DVD player; VCR; Connecting to a DVD Player
11 B C A If using a component video connection If using an audio/video connection AUDIO IN COMPONENT VIIDEO R L / (MONO) VIDEO IN C R / R R C B / P B Y K S-VIDEO IN USB 1 RGB IN 2 RGB OUT CONTROL A A A B B B C COMPONENT VIDEO IN COMPONENT VIDEO OUT AUDIO/VIDEO IN AUDIO/VIDEO OUT S-VIDEO IN S-VIDEO O...
Page 13 - Connecting to a Display Monitor; Display monitor
12 RGB cable A AUDIO IN COMPONENT VIIDEO R L / (MONO) VIDEO IN C R / R R C B / P B Y K S-VIDEO IN USB 1 RGB IN 2 RGB OUT CONTROL A RGB OUT RGB IN CONNECTING YOUR DEVICES (continued) Connecting to a Display Monitor Display monitor CP-S317/327W/最終 03.5.27 2:22 PM ページ 12
Page 14 - Insert the batteries; • The remote control works with both the; USING THE REMOTE CONTROL; Precautions to observe in regards to the batteries; Precautions to observe when using the remote control; won't be using the remote control for an extended period.; Putting batteries into the remote control unit
13 1 Remove the batterycover Slide back and removethe battery cover in thedirection of the arrow. Insert the batteries Align and insert the two AAbatteries (that came with theprojector) according to their plusand minus terminals (as indicated in the remote control). Close the batterycover Replace th...
Page 15 - Turn on the projector's power; TURNING ON THE POWER; Control panel; Precautions; When the power is ON, a strong light is emitted. Do not look into the; Turn the
14 STANDBY/ON INPUT KEYSTONE RESET LANP TENP POWER 1 Make sure that the power cord is firmly andcorrectly connected to the projector and outlet 2 Turn on the projector's power Set the power switch to [ | ] (ON). The projector will goto STANDBY mode and the POWER indicator will light tosolid orange. ...
Page 16 - Using the remote control; Selecting an Input Signal
RGB 15 6 Use the zoom ring to adjust thescreen size 7 Use the focus ring to focus thepicture 5 If selecting RGB inputPress the RGB button Press this button to toggle between thedevices connected to RGB IN 1 and 2.As illustrated below, each time youpress the RGB button, the projectorswitches between ...
Page 17 - TURNING OFF THE POWER; • Except in
16 VIDEO ASPECT HOME END MUTE PAGE DOWN KEYSTONE FREEZE OFF ON MENU POSITION ENTER ESC RESET PAGE UP VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON 1 Press the STANDBY/ON button (controlpanel or remote control) The message "Power off?" will appear on the screen for approximately 5 seconds. ...
Page 18 - Press this to increase the volume; ADJUSTING THE VOLUME
17 VIDEO ASPECT HOME END MUTE PAGE DOWN KEYSTONE FREEZE OFF ON MENU POSITION ENTER ESC RESET PAGE UP VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON 1 Press the VOLUME button As illustrated on the right, a dialog willappear on the screen to aid you in adjustingthe volume. 1 Press the MUTE button As ...
Page 19 - ADJUSTING THE POSITION
18 VIDEO ASPECT HOME END MUTE PAGE DOWN KEYSTONE FREEZE OFF ON MENU POSITION ENTER ESC RESET PAGE UP VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON 1 Press the POSITION button As illustrated on the right, a dialog will appear on the screento aid you in adjusting the position. 2 Use the , , , button...
Page 20 - note that it may not function correctly with some input signals.; USING THE AUTOMATIC ADJUSTMENT FEATURE; Press the AUTO button
19 The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input signals. NOTE 1 USING THE AUTOMATIC ADJUSTMENT FEATURE Press the AUTO button Horizontal position (H. POSIT), vertical position (V.POSIT), clock phase (H. PHAS...
Page 21 - CORRECTING KEYSTONE DISTORTIONS
20 • This function may not be work well with some types of input signals.• The adjustable range for correcting keystone distortions will vary with the type of input signal. NOTE CORRECTING KEYSTONE DISTORTIONS 1 Press the KEYSTONE button As illustrated on the right, a dialog will appearon the screen...
Page 22 - USING THE MAGNIFY FEATURE; The projector enters MAGNIFY mode.
21 The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state. NOTE • The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO, BLANK ON/OFF o...
Page 23 - Press the SEARCH button; SMALL; Press the BLANK button
22 SIGNAL SEARCHING SELECTING THE ASPECT RATIO TEMPORARILY BLANKING THE SCREEN 1 Press the SEARCH button When you press the SEARCH button, the projector beginssearching for input signals. If it detects an input signal, thesearch will cease and the projector will project the detectedsignal. If the pr...
Page 24 - USING THE MENU FUNCTIONS
23 USING THE MENU FUNCTIONS 1 Press the MENU button The menu display appears on the screen. Theprojector has the following menus: MAIN,PICTURE-1, PICTURE-2, INPUT, SCREEN, andOPTION. Select a menu using the / buttons. The current settings of the items that can be manipulated via theselected menu app...
Page 25 - You can use the remote control as a simplified mouse or keyboard.; OPERATING THE PC SCREEN; USB Mouse/Keyboard Control
24 You can use the remote control as a simplified mouse or keyboard. OPERATING THE PC SCREEN CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment. • Only connect to a PC.• Before connecting, read the manuals of the device you will connect.• Do not unplug the connec...
Page 26 - THE LAMP; • Do not use the projector with the lamp cover removed.
25 THE LAMP HIGH VOLTAGEHIGH TEMPERATUREHIGH PRESSURE Before replacing the lamp, check the serial number of the replacement lamp bulb (sold separately:DT00511), then contact your local dealer. Before replacing the lamp, turn off the power, and unplugthe power cord, then wait at least 45 minutes, in ...
Page 27 - Replacing the lamp
26 • The LAMP indicator is also red when the lamp unit reaches high temperature. Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power ON again. If the LAMP indicator is still red, replace the lamp. NOTE THE LAMP (continued) Replacing the lamp All projector lam...
Page 28 - THE AIR FILTER; Caring for the air filter; Turn off the projector, and unplug the power cord; Air Filter Cover
27 THE AIR FILTER Caring for the air filter The air filter should be cleaned about every 100 hours. If the LAMP indicator andTEMP indicator blink red simultaneously, or a message prompts you to clean the airfilter when you turn on the unit, the filter needs to be cleaned. (See "RelatedMessages&#...
Page 29 - Replacing the air filter; Remove the air filter cover and air filter; • To reset the lamp timer, from the OPTION menu, select FILTER TIME.
28 THE AIR FILTER (continued) Replacing the air filter If the soiling will not come off the air filter, or it becomes damaged, then it needs to bereplaced. Please contact your local dealer, after confirming the model of yourseparately sold replacement air filter. (See "Optional Parts" on Vol...
Page 30 - OTHER CARE; Caring for the inside of the projector :
29 OTHER CARE Caring for the inside of the projector : In order to ensure the safe use of your projector, please have it cleaned and inspected byyour local dealer about once every 2 years. Never try to care for the inside of the unityourself. Doing so is dangerous. Caring for the lens : Lightly wipe...
Page 32 - MULTIFUNCTIONAL SETTINGS; MAIN Menu
MAIN Menu Item Description BRIGHT Adjust Brightness: Light ⇔ Dark CONTRAST Adjust Contrast: Strong ⇔ Weak ASPECT Select Aspect Ratio: At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEOInput:4:3 ⇔ 16:9 At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:4:3 ⇔ 16...
Page 33 - PICTURE1 Menu
PICTURE 1 Menu PICTURE 2 Menu With the PICTURE 1 menu, the five items shown in the Tablebelow can be performed.Perform each operation in accordance with the instructions in theTable. With the PICTURE 2 menu, the five items shown in the Tablebelow can be performed.Perform each operation in accordance...
Page 34 - INPUT Menu
MULTIFUNCTIONAL SETTINGS (continued) INPUT Menu With the INPUT menu, the four items shown in the Table below can beperformed. With inputting of RGB IN 1 and RGB IN 2 signals, thehorizontal and vertical frequencies of the signals will be displayed on theinitial screen of the INPUT menu.Perform each o...
Page 35 - SCREEN Menu
SCREEN Menu With the SCREEN menu, the five items shown in the Table below can be performed.Please perform each operation in accordance with the instructions in the Table. 5 SCREEN Menu Item Description BLANK Selection of BLANK Screen: MyScreen ⇔ ORIGINAL ⇔ . . ⇔ . . ⇔ . . The BLANK Screen may be vol...
Page 36 - OPTION Menu
MULTIFUNCTIONAL SETTINGS (continued) OPTION Menu With the OPTION menu, the five items shown in the Table belowcan be performed.Please perform each operation in accordance with the instructionsin the Table. MENU : SELECT MAINPICTURE-1PICTURE-2INPUTSCREENOPTION VOLUMEAUTO OFFWHISPERLAMP TIMEFILTER TIM...
Page 37 - WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED; Related Messages; NOTES
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED Related Messages When the unit's power is ON, messages such as those shown below may be displayed. Whenany such message is displayed on the screen, please respond as described below. 7 Note 1: Although this message will be automatically disappe...
Page 38 - Regarding the Indicator Lamps
Regarding the Indicator Lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and theTEMP indicator have the meanings as described in the Table below.Please respond in accordance with the instructions within the Table. POWER indicator LAMP indicator TEMP indicator Description The o...
Page 39 - WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued); Phenomena That May Easily Be Mistaken for Machine Defects
9 WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued) Phenomena That May Easily Be Mistaken for Machine Defects Before requesting repair, check in accordance with the following chart.If the situation cannot be corrected, then contact your dealer. Although bright spots or dark spots m...
Page 40 - Dimension Diagram; Item; This specifications are subject to change without notice.; SPECIFICATIONS
Dimension Diagram Unit : mm 77.5 295 237 87.5 37 50.5 231 Item Specification Product name Liquid crystal projector Liquidcrystalpanel Panel size 1.8 cm (0.7 type) Drive system TFT active matrix Pixels 8062: ： 480,000 pixels (800 horizontal x600 vertical) 8802: ： 786,432 pixels (1024 horizontal x 768...
Page 41 - WARRANTY AND AFTER-SERVICE
If a problem occurs with the equipment, first refer to the “WHAT TO DO WHEN YOUTHINK A MACHINE DEFECT HAS OCCURRED” section and run through the suggestedchecks. If this does not resolve the problem contact your dealer or service company. Theywill tell you what warranty condition is applied. WARRANTY...
Page 42 - SIGNAL CONNECTOR PIN ASSIGNMENT; signal
1 T E C H N I C A L T E C H N I C A L SIGNAL CONNECTOR PIN ASSIGNMENT RGB IN [1]/[2]RGB OUT D-sub 15-pin Shrink Mini Din 4-pin S-VIDEO Mini Din 4-pin Pin No Signal 1 Color:0.286Vp-p (NTSC, burst signal),75 Ω terminator 0.3Vp-p (PAL/SECAM, burst signal),75 Ω terminator 2 Brightness:1.0Vp-p, 75 Ω term...
Page 43 - EXAMPLE OF COMPUTER SIGNAL; Some computers may have multiple display screen modes. Use of some
2 Resolution H ×× V fH (kHz) fV (Hz) Rating Signal mode Display mode CP-S318 CP-X328 720 × 400 37.9 85.0 VESA TEXT Zoom in Zoom in 640 × 480 31.5 59.9 VESA VGA (60Hz) Zoom in Zoom in 640 × 480 35.0 66.7 Mac13"mode Zoom in Zoom in 640 × 480 37.9 72.8 VESA VGA (72Hz) Zoom in Zoom in 640 × 480 37.5...
Page 44 - INITIAL SET SIGNALS
3 The following signals are used for the initial settings.The signal timing of some computer models may be different. In such case, refer toadjust the V.POSIT and H.POSIT of the menu. DATA HSYNC DATA VSYNC Display interval c Back porch b Sync a Front porch d Display interval c Back porch b Sync a Fr...
Page 45 - CONNECTION TO THE MOUSE CONTROL; ADB Mouse
4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CONNECTION TO THE MOUSE CONTROL 1 2 3 4 1 2 3 4 + 5V —DATA + DATA GND + 5V —DATA + DATA GND 1 2 3 4 2 1 3 4 USB jack (B type) USB jack (A type) Projector USB cable Computer ADB Mouse 2 1 4 3 6 5 2 1 4 3 8 7 10 9 12 11 14 13 15 RTS GND +5V ADB GND +5V (POWER ON) ...
Page 46 - projector power supply.; Communications setting; Protocol; Command data chart; RS-232C COMMUNICATION
5 (1) Turn off the projector and computer power supplies and connect with the RS-232C cable.(2) Turn on the computer power supply and after the computer has started up, turn on the projector power supply. Control jack D-sub 15-pin shrink jack 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RD TD GND SELO RTS 1 ...
Page 52 - This equipment has been tested and found to comply with the; INSTRUCTIONS TO USERS:; This equipment complies with the requirements; FCC Statement Warning; This Class B digital apparatus complies with Canadian ICES-003.; Pour les utilisateurs au Canada
R E G U L A T O R Y N O T I C E S R E G U L A T O R Y N O T I C E S WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in...
Page 59 - DUKANE CORPORATION; FIVE-YEAR LIMITED WARRANTY
DUKANE CORPORATION FIVE-YEAR LIMITED WARRANTY This Dukane projector is warranted to the original purchaser for a period of five (5) years fromthe original purchase date – in normal operating conditions – against defects in material andworkmanship . DUKANE CORPORATION EXPRESSLY DISCLAIMS ALL OTHERWAR...
