Dukane 8107WIBM - Manual
Dukane 8107WIBM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Initial set signals; and H POSITION in the IMAGE menu.; Data
- Page 3 – Connection to the ports; NOTICE; COMPUTER IN1; MONITOR OUT; D-sub 15pin mini shrink jack
- Page 4 – VIDEO
- Page 5 – AUDIO IN2
- Page 7 – To input component video signal to COMPUTER IN ports; To input component video signal to the; or; and
- Page 8 – RS-232C Communication; Connection; Turn off the projector and the computer.; CONTROL; CONTROL; port
- Page 9 – Communication settings; table
- Page 10 – NOTE
- Page 11 – LAN
- Page 12 – Communicaion Port; The following two ports are assigned for the command control.; Port Settings; Security Settings
- Page 13 – Command control settings; Header; Refer to RS-232C Communication command format
- Page 15 – SERVICE - COMMUNICATION in the User's Manual - Operating Guide; Network Bridge Communication
- Page 16 – For communication setting, use the OPTION - SERVICE - COMMUNICATION; Transmission method
- Page 31 – PJLink command
1
NOTE
• Be sure to check jack type, signal level, timing and resolution before
connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these modes
will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA (1600x1200),
the signal will be converted to the projector’s panel resolution before being displayed.
The best display performance will be achieved if the resolutions of the input signal
and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite
sync or a sync on G.
• The HDMI
TM
input does not support the signals marked with *.
Projector
8107WIB
User's Manual (detailed)
Operating Guide – Technical
Resolution (H x V) H. frequency (kHz) V. frequency (Hz)
Rating
Signal mode
720 x 400
37.9
85.0
VESA
TEXT
640 x 480
31.5
59.9
VESA
VGA (60Hz)
640 x 480
37.9
72.8
VESA
VGA (72Hz)
640 x 480
37.5
75.0
VESA
VGA (75Hz)
640 x 480
43.3
85.0
VESA
VGA (85Hz)
800 x 600
35.2
56.3
VESA
SVGA (56Hz)
800 x 600
37.9
60.3
VESA
SVGA (60Hz)
800 x 600
48.1
72.2
VESA
SVGA (72Hz)
800 x 600
46.9
75.0
VESA
SVGA (75Hz)
800 x 600
53.7
85.1
VESA
SVGA (85Hz)
832 x 624
49.7
74.5
Mac 16” mode
1024 x 768
48.4
60.0
VESA
XGA (60Hz)
1024 x 768
56.5
70.1
VESA
XGA (70Hz)
1024 x 768
60.0
75.0
VESA
XGA (75Hz)
1024 x 768
68.7
85.0
VESA
XGA (85Hz)
1152 x 864
67.5
75.0
VESA
1152 x 864 (75Hz)
1280 x 768
47.7
60.0
VESA
W-XGA (60Hz)
1280 x 800
49.7
60.0
VESA
1280 x 800 (60Hz)
1280 x 960
60.0
60.0
VESA
1280 x 960 (60Hz)
1280 x 1024
64.0
60.0
VESA
SXGA (60Hz)
1280 x 1024
80.0
75.0
VESA
SXGA (75Hz)
*1280 x 1024
91.1
85.0
VESA
SXGA (85Hz)
1440 x 900
55.9
59.9
VESA
WXGA+ (60Hz)
1680 x 1050
65.3
60.0
VESA
WSXGA+ (60Hz)
*1600 x 1200
75.0
60.0
VESA
UXGA (60Hz)
Example of computer signal
403-8107WIB-Technical-00
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Act...
3 Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. ►Only the signal that is input from the COMPUTER IN1 or IN2 can be output from the MONITOR OUT port. COMPUTER IN1 COMPUTER IN2 HDMI USB T...
4 D S-VIDEO Mini DIN 4pin jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL(60Hz) Pin Signal 1 Color signal 0.286Vp-p (NTSC, burst), 75Ω terminator Color signal 0.300Vp-p (PAL/SECAM, burst) 75Ω terminator 2 Brightness signal, 1.0Vp-p, 75Ω terminator 3 Ground 4 Ground Connection to the por...
