Page 2 - Table of Contents; Safety
0 Table of Contents CHAPTER 1 PRECAUTIONS ................................................................................ 2 z Safety Precautions ................................................................................... 3 z FCC Warning .........................................................
Page 4 - Chapter 1 Precautions
2 Chapter 1 Precautions Always follow these safety instructions when setting up and using the Document Camera: 1. Please do not tilt the machine while using. 2. Do not place the Document Camera on an unstable trolley, stand or table. 3. Do not use the Document Camera near water or source of heat. 4....
Page 6 - Chapter 2 Package Content
4 Chapter 2 Package Content Please make sure the package comes with the following items when you unpack: (Total 9 items) ： Main Unit User’s Guide CD Remote Warranty Card Power Cable VGA Cable C-Video Cable USB Cable DVI Adapter (Optional)
Page 7 - Chapter 3 Product Overview; Product Introduction; Infrared receiver area
5 Chapter 3 Product Overview 3.1 Product Introduction 8. DIP Switch 7. Infrared receiver area 9. Auxiliary Stand 5. I/O Connection 3. Gooseneck 4. Lamp 2. Lens 1. Auto Focus Button 6. Power ／ Control keypad
Page 8 - DIP Switch Setting; ved; ON; PAL C-Video SVGA Reserved
6 3.2 I/O Connection 3.3 DIP Switch Setting Factory default settings are as the following: ved ON OFF PAL C-Video SVGA Reserved NTSC RGB XGA Reserved (Reserved is OFF all the time) 1 2 3 4
Page 9 - Play; ghij
7 3.4 Remote Control * Only use CR2025 as replacement battery. Please properly dispose of any used batteries. 1. Power: Power on or off. 2. Source: Switch between different signal sources. 3. BRT+/- : Make the image brighter or darker 4. Menu: Show the Control Menu (OSD, On Screen Display, Menu) 5. ...
Page 10 - Chapter 4 How to use it; Automatic Image Adjustment; Keypad
8 Chapter 4 How to use it 4.1 Getting Started 4.1.1 Turn on the Document Camera When the power cord is plugged in, the LED indicator will be "Red". When turned on, the LED indicator will be "Blue". 4.1.2 Automatic Image Adjustment Auto-adjust to obtain the optimum image. It may requi...
Page 11 - Modes
9 4.2 Major Functions 4.2.1 Select Input Source The default input source is set as the "Document Camera", press 『 Source 』 to switch. 4.2.2 『 Photo/Text 』 Modes The default setting is "Photo". Users can switch mode by pressing "Photo/Text" button. Keypad Remote Remote Monitor...
Page 12 - Remote
10 4.2.3 Zoom in / out 4.2.4 Auto Focus 4.2.5 Brightness Adjustment Goose-head Remote
Page 14 - Advanced Functions; ef
12 4.3 Advanced Functions 4.3.1 Capture of Images Remote or Keypad ：： Press 『 Capture 』 button from remote control. 4.3.2 Play back captured Images Remote or Keypad ： 1. Press 『 Play 』 to show thumbnail images in memory. 2. Use 『 ef 』 to select thumbnail. 3. Press 『 Enter 』 to display as full screen...
Page 15 - NOTICE
13 7. Press 『 Enter 』 to execute. 8. Press 『 Menu 』 to Exit 4.3.4 Preset controls Preset save: Save the customized user setting parameters (Ex. Zoom, brightness, color, AE setting). 1. Press 『 Preset 』 to entry the Preset menu. 2. Use 『 d 』 to 『 save 』 3. Use 『 f 』 to 『 Yes 』 4. Press 『 Enter 』 to e...
Page 17 - Enter
15 Chapter 5 Control Menu (OSD Menu) Introduction (On Screen Display) 5.1 Operation A. Use 『 fe 』 to select main function. B. Use 『 dS 』 to select sub-item. C. The activated item with red line and yellow block. Use 『 d S 』 to select other items. D. 『 fe 』 : For More functions, you can press 『 fe 』 t...
Page 18 - VGA
16 ¾ VGA Mode (Computer Image output mode) Layer 1 Layer 2 Layer 3 Description Image Normal/ Gray/Slide/ Microscope/Film Select Normal/Gray/Slide/ Microscope/Film image mode Freeze ON ／ OFF Use Freeze to retain the image on the screen. Flip ON ／ OFF Flip image by 180° (Up → Down & Left → Right )...
Page 19 - Select Photo; Display; Exit the Menu; Setting
17 ¾ C-Video Mode ( Composite Video output mode) This is a low resolution output that requires the camera’s bottom switch to be reset. THERE IS NO COMPOSITE VIDEO OUTPUT WHEN THE “COMPUTER IMAGE” MODE IS USED. Layer 1 Layer 2 Layer 3 Content Focus -/+ 100~300 Gamma Photo ／ Text Select Photo ／ Text m...
Page 26 - File; Initial Window (Before Camera Image is Present); Full Operation
24 Top window tool bar Functions 6.2.1 File ( Folder Icon) Initial Window (Before Camera Image is Present) z New ： Open new project. A blank white display is presented in the main window. z Open ： Open a project in a stored file such as the USB335 Folder. Project files are “mr2” format. z Import Fro...
Page 28 - Full Screen
26 6.2.6 Paint tool ( Annotation) This is a basic annotation or drawing tool, it can be used in the real time and the edit modes, right click for tool, left click to mark any region in the image. 1. Pointer ： Mouse pointer 2. Laser ： Click Laser to show a spot on the screen 3. Handwrite ： Click and ...
Page 31 - Operation Information; Real time operation; Import a live image from the Camera.; Import From Device; Import the images that are stored in the Camera.; Edit model open old file; Use Preview Window tool
29 6.3 Operation Information 6.3.1 Display image ： Real time operation ： Import a live image from the Camera. Import From Device ： Import the images that are stored in the Camera. Will not provide images if memory is empty. Edit model open old file ： Use Preview Window tool （ ） to open an old ...
Page 32 - Annotation; Click any tool in the “paint tool” menu to modify the image.
30 6.3.2 Edit image ： Annotation Annotate; ： Click any tool in the “paint tool” menu to modify the image. Edit and save ： After editing picture, click the small picture icon in the preview area tool bar, and then save the picture. 6.3.3 USB335 Software Menus
Page 34 - Chapter 7 Troubleshooting
32 Chapter 7 Troubleshooting If none of the following suggested solutions solves the problem, call your dealer or your service center. Problem 1: No picture from the Camera. Solution - 1. Wait a few seconds, press desired source selector again. 2. Press a different source, then press-desired source ...
Page 35 - Audio Visual Products
2900 Dukane Drive St. Charles, Illinois 60174 www.dukcorp.com/av Toll-free: 800-676-2487 Fax: 630-584-5156e-mail: [email protected] Audio Visual Products #401-335-00 Real Time Edit Paint Tool Full screen Freeze File Image Adjust Paint Tool Full screen Tool Bar Functions File Real Time Edit Freeze ...
