Page 3 - Usage Notice; Table of Contents
English 1 Usage Notice Precautions .......................................................................................... 2 Introduction About the Product ................................................................................. 3 Package Overview ...........................................
Page 4 - Precautions
English 2 Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. Do: q Turn off the product before cleaning. q Use a soft cloth moistened with mild detergent to clean the display housing. q Disconnect the power plug from A...
Page 5 - About the Product; Introduction
English 3 About the Product This product, designed with a high-powered metal halide lamp, is an SVGA data/video portable projection display. The outstanding feature of it are listed as follows: q 10.34lbs (4.7 kg) lightweight compact design q 330-watt user replaceable metal-halide lamp q Single pane...
Page 6 - Package Overview
English 4 Package Overview This projection display comes with all the items shown below. Check to makesure your unit is complete. Contact your dealer immediately if anything ismissing.
Page 7 - Product Overview; Main Unit; Installation
English 5 Product Overview w Main Unit Installation Rear Connection Ports Panel Control Buttons Keystone Correction Lens Latch Lamp Door Carrying Handle Elevator Foot Lamp Latch Lens Power Switch PowerConnector Fuse Monitor Loop-through Connector Computer InputConnector Audio Inputs forComputer Audi...
Page 8 - Remote Control
English 6 w Remote Control Directional Select Keys Zoom In/Zoom Out * For more detailed information, please refer to “Function Descriptions” on page 13. Curtain Source Selection Volume Enter/Pointer Power on/Standby On-Screen Menus FREEZE CURTAIN ON STANDBY ZOOM IN ZOOM OUT SOURCE ENTER POINTER MENU...
Page 9 - Start Your Installation; Connecting the Projection Display
English 7 Start Your Installation w Connecting the Projection Display Monitor Cable VGA Signal Cable Audio Cable Audio Cable S-Video Cable RCA Audio/ VideoCable Power Cord Remote Receiver Cable Computer Mouse Port
Page 10 - Setting Up Procedure:; Remote Control Connections
English 8 Follow regular setup procedures. Make sure you have a 100% compatible MicrosoftMouse and a Microsoft Mouse driver installed. 4 Setting Up Procedure: 1. Turn off your computer.2. Unplug the mouse from your computer.*3. Connect the remote receiver cable to the computer and the projection dis...
Page 11 - Powering On the Projection Display.; Powering On/Off the Projection Display
English 9 u u u u u Powering On the Projection Display. 4 4 4 4 4 Switch on the power; then turn on the lamp by pressing “STANDBY”button.Press the “ I ” sign of the power switch to turn on the projection display. After afew seconds, press the “Power on/Standby” button to power on the projectionlamp....
Page 12 - Adjusting the Image Size
English 10 q Positioning the projection display (projection distance and image size) q Slide the lens latch and pop up the projection lens. Switch on the power andpress the “Power on/Standby” button. See “Powering On/Off the ProjectionDisplay” on page 9 for more information. q Adjusting the screen i...
Page 13 - User Control Overview; Panel Control; User Controls
English 11 User Control Overview There are two ways for you to control the functions: panel control and remote control. w Panel Control POWER ON STANDBY RESET MENU ENTER 4 Directional Keys w Remote Control Zoom in/Zoom out Source Selection Volume Enter/Pointer Power on/Standby On-Screen Menus Direct...
Page 14 - OSD Menus
English 12 w OSD Menus The OSD (On-Screen Display) menus will allow you to easily adjust the displayfunctions. Press the “MENU” button for the OSD menu options. 4 When in computer sources,the OSD will be: Language Contrast Tracking Frequency Custom Memory Audio Source Rear Projection Ceiling Project...
Page 15 - Function Descriptions
English 13 Function Descriptions 4 Power On/Standby Press the “Power On/Standby” button to turn on theprojection lamp. Press “Menu” button to pop up the OSD menu. Press “Reset” to return the display parameters of thecurrent mode to its factory default settings. “Enter” is used for confirming your se...
Page 16 - Presentation Functions - computer source
English 14 Choose this funtion from OSD menu for a ceiling mountedprojection. After changing a new lamp, reset the lamp life timer fromOSD menus. Choose this function to show or hide the warningmessage. Choose “Exit” item to leave OSD menu. 4 Exit 4 Lamp Warning 4 Lamp Reset 4 Ceiling Projection 4 C...
Page 17 - Auto Image
English 15 Choose “Tracking” item to synchronize the signal timingof the display to that of the graphic card. When youexperience an unstable or flickering image, use thisfunction to correct it. “Frequency” is for changing the display data frequencyto match the frequency of your computer’s graphic ca...
Page 18 - F r e e z e
English 16 w Presentation Functions -- video source To adjust the contrast or brightness of the image, select“Contrast/Brightness” from OSD menus. To adjust the color or tint of the image, select “Color/Tint” from OSD menus. Press the “Freeze” button to still the screen image. 4 Contrast/Brightness ...
Page 19 - Troubleshooting; Appendices
English 17 Troubleshooting If you are experiencing trouble with the projection display, refer to the follows. If theproblem persists, please contact your local dealer or our service center. Problem: No image appears on screen. 4 Press “Power on/Standby” button. 4 Ensure all the cables and power conn...
Page 20 - Problem: Image is unstable or flickering
English 18 4 If you are using a Notebook PC: 1. You are required to implement above steps of resolution setting of computer first. 2. Switch the Notebook PC display to the “external display only” or “CRT only”mode. 4 If you are using an Apple Macintosh or Apple PowerBook: 1. Insert a Mac signal adap...
Page 21 - Maintenance; Changing the Lamp; Lamp Changing Directions:
English 19 Maintenance w Changing the Lamp The projection display will detect the lamp life itself. It will show you a warningmessage when the lamp is used over working hours. When you see this message,change the lamp as soon as possible. Make sure the projection display has cooled for at least 30 m...
Page 23 - Changing the Fuse; Fuse Changing Procedure:
English 21 w Changing the Fuse Fuse Holder the Blown Fuse 1. Switch off the power and unplug the power cord. 2. Pull out the fuse holder. 3. Remove the blown fuse and then insert a new fuse. 4. Put the fuse holder back in position. 4 Fuse Changing Procedure:
Page 24 - Specifications
English 22 Specifications LCD Panel - active matrix TFT color LCD - 6.4” panel x 1 - tr=30ms, tf=50ms response time - 200:1 contrast ratio Lamp - 330-watt metal halide Display Resolution - 800 pixels(H) x 600 lines(V) Displayable Color - 16.7M colors Image Size - 40” to 180” diagonal Projection Dist...
Page 25 - Compatibility Modes
English 23 IBM & VESA VGA 64 0 x 35 0 31 .4 7 70 .0 9 IBM & VESA VGA 64 0 x 35 0 37 .8 6 85 .0 8 IBM & VESA VGA 64 0 x 40 0 31 .4 7 70 .0 9 IBM & VESA VGA 64 0 x 40 0 37 .8 6 85 .0 8 IBM & VESA VGA 72 0 x 40 0 31 .4 7 70 .0 9 IBM & VESA VGA 72 0 x 40 0 37 .9 3 85 .0 4 IBM &am...
Page 26 - LEGAL INFORMATION; FIVE-YEAR LIMITED WARRANTY
LEGAL INFORMATION FIVE-YEAR LIMITED WARRANTY This Dukane LCD projector is warranted to the original purchaser for a period of five (5) years from the original purchase date - in normal use and service - against defects in material and workmanship. DUKANE CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WAR...
