Dual XDM17BT User Manual - Free PDF Download

Page 2 - INSTALLATION; Preparation

2 XDM17BT INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions.• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or wher...

Page 3 - Wiring Diagram

3 XDM17BT INSTALLATION Wiring Diagram FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The unit uses one 10 amp AGC fuse located beside the Heat Sink 10 AMP AGC Fuse

Page 4 - OPERATION; Control Locations

4 XDM17BT OPERATION Control Locations Preset 2 / Intro Preset 1 / Play/Pause Mode Band/Display Tune Up Tune Down Power Mute Voice Control Volume Knob Bluetooth Talk USB Port 1 2 3 4 5 1 11 2 12 3 13 4 14 5 15 6 16 7 17 8 18 9 10 7 6 15 14 13 12 11 10 9 17 18 16 Auxiliary Input Reset Preset 6 / Folde...

Page 5 - General Operation

5 XDM17BT OPERATION General Operation Press the button to turn the unit on. Press again to turn the unit off. Press MODE to select between Radio, USB, Bluetooth, AUX. Modes of operation are shown in the display. Adjust volume using the volume knob (00-40). Insert a 3.5mm cable in the unit's front AU...

Page 6 - AM/FM Tuner Operation

6 XDM17BT OPERATION AM/FM Tuner Operation Seek Tuning Manual Tuning Band Storing Presets Recalling Presets Automatically Store Preset Scan Stations Press TUNE or TUNE to seek to the previous or next strong station. Press and hold TUNE or TUNE to enter manual tuning mode, then press TUNE or TUNE mome...

Page 7 - USB Operation

7 XDM17BT OPERATION USB Operation Playing MP3 Files Track Select Fast Forward and Reverse Pause Folder Access Repeat Random Intro To play MP3 files, insert a USB device containing MP3 files. Press TUNE to skip to the beginning of the next track. Press TUNE to skip to the beginning of the previous tr...

Page 8 - Bluetooth Operation

8 XDM17BT OPERATION Bluetooth Operation Preparation Pairing a New Device Streaming Audio Troubleshooting Before using a Bluetooth device, it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process. The head unit broadcasts the pairing sign...

Page 9 - Dual iPlug P2 Smart App Remote Control

9 XDM17BT OPERATION Dual iPlug P2 Smart App Remote Control Front 3.5mm Aux Input Connect an optional audio source into the 3.5mm (front panel) input. Select auxiliary input from the Main Menu to listen to audio. Adjust volume on the external audio source as needed (if connected to the headphone outp...

Page 10 - Specifications

10 XDM17BT OPERATION Specifications Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: >30dB Frequency response: 30Hz-13kHz Tuning range: 530kHz-1710kHz Usable sensitivity: <42dBu Frequency response: 30Hz-2.2kHz Speaker output i...

Page 11 - Troubleshooting

11 XDM17BT OPERATION Troubleshooting Problem Cause Action Unit will not turn on (no power) Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Black wire not connected Check connection to ground Fuse blown Replace...

Page 12 - Limited One Year Warranty

12 XDM17BT OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one ...

Page 13 - FCC Compliance

13 XDM17BT OPERATION FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired...