DK2 OPC506E - User Manual

DK2 OPC506E

DK2 OPC506E Wood Chipper – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
Page: / 14

Table of Contents:

  • Page 2 – Open and unpack all items. Leave lots of working space.; NOTE: UPON INSPECTION OF PARTS IF YOU FIND ANY DAMAGE OR MISSING; PLEASE DO NOT RETURN TO THE STORE
  • Page 5 – INSTALL THE TOW BAR HITCH USING 4 BOLTS. PLACE BOLTS
  • Page 6 – INSTALL CHIP CHUTE ON BARN HINGES. SWING CHUTE
  • Page 7 – Install the Chip Chute Directional Deflector and tighten the
  • Page 8 – Install the feed chute on the 2 hinges. To seat the hinge pins
  • Page 13 – BEFORE TURNING KEY AND PULL STARTING ENGINE; IF YOUR UNIT WILL NOT START –; NEVER
Loading the manual

CHIPPER ASSEMBLY GUIDE

MODEL:

OPC504 and OPC506

4 and 6 INCH COMMERCIAL CHIPPER

DETAIL K2 INC.

DK2 POWER USA

4301 S Valley View Blvd STE 10-11

Las Vegas, NV 89103

1-702-331-5353

SWING CHUTES

TOWABLE

KOHLER ENGINE

COMMERCIAL CHIPPER

REV 3 – 7-22-19

DETAIL K2, INC.

1080 Clay Avenue Unit 2

Burlington, Ontario, Canada L7L0A1

DK2 USA EAST

6245 Industrial Parkway

Whitehouse, OH 43571

PARTS AND SERVICE 702-331-5353 OR

WWW.DK2POWER.COM

CONTACT US

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Open and unpack all items. Leave lots of working space.; NOTE: UPON INSPECTION OF PARTS IF YOU FIND ANY DAMAGE OR MISSING; PLEASE DO NOT RETURN TO THE STORE

STEP 1: CHECK THE PACKING Open and unpack all items. Leave lots of working space. Inspect all parts. The Chipper is shipped in a crate. Leave the sides folded down and use as your work space. NOTE: UPON INSPECTION OF PARTS IF YOU FIND ANY DAMAGE OR MISSING PARTS PLEASE CALL DK2 POWER AT 702-331-5353...

Page 5 - INSTALL THE TOW BAR HITCH USING 4 BOLTS. PLACE BOLTS

STEP 4: INSTALL THE TOWBAR AND STAND ASSEMBLY 1. INSTALL THE TOW BAR HITCH USING 4 BOLTS. PLACE BOLTS FROM OUTSIDE AND PLACE NUTS ON INSIDE. 2. ASSEMBLE TOW STAND AND INSERT THE HITCH PIN 3. INSERT TOW BAR AND SECURE WITH TOW BAR SCREW LOCK

Page 6 - INSTALL CHIP CHUTE ON BARN HINGES. SWING CHUTE

STEP 5: INSTALL CHIP CHUTE 1. INSTALL CHIP CHUTE ON BARN HINGES. SWING CHUTE CLOSED AND LOCK IT. 2. A RUBBER MALLET MAY BE USED IF NEEDED TO SET THE BARN HINGE PINS INTO THE MATING HINGES FOR THE FIRST TIME INSTALL.

Other DK2 Wood Chippers Models