Dixon 312 - Manual

Dixon 312

Dixon 312 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
Page: / 9

Table of Contents:

  • Page 2 – REMOVING THE BODY; Reverse above procedure to reinstall.; ADJUSTMENT OF MOWER DECK DRIVE BELT; REMOVING THE MOWER BLADE; Sharp edges on blade can cause injury!; REMOVING THE MOWER DECK; Disconnect the wiring loom at the deck safety switch P/N 4242.
  • Page 3 – MOWER BLADE OPERATION; slowly; SAFETY CHECKS; not
  • Page 7 – 1 2 T R A N S A X L E A S S E M B L Y
Loading the manual

TECHNICAL DATA
ZTR Model 312

IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATING OR MAKING ADJUSTMENTS

SEAT ADJUSTMENT

1. Pull or lift body retention latch P/N 3934

from transaxle backing plate, raise
and push body and seat assembly
forward.

2. Loosen four seat adjustment knobs P/

N 1849 and slide seat forward or
backward to desired position.

3. Re-tighten seat adjustment knobs P/N

1849. DO NOT operate mower without
seat adjustment knobs properly
tightened.

4. Close upper body and push retention

latch. P/N 3934 over transaxle backing
plate.

DIXON INDUSTRIES. INC. A
BLOUNT COMPANY AIRPORT
INDUSTRIAL PARK
PO BOX 1569

COFFEYVILLE KS 67337 0945
316 251 2000
FAX 316 251 4117

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - REMOVING THE BODY; Reverse above procedure to reinstall.; ADJUSTMENT OF MOWER DECK DRIVE BELT; REMOVING THE MOWER BLADE; Sharp edges on blade can cause injury!; REMOVING THE MOWER DECK; Disconnect the wiring loom at the deck safety switch P/N 4242.

REMOVING THE BODY 1. The 312 has a two - piece polyethylene body. The upper body can be folded forward to expose the transaxle. In some cases, it may be necessary to remove the upper body to service the transaxle. 2. To remove upper body, remove two bolts P/N 3093 from the front of upper body hinge ...

Page 3 - MOWER BLADE OPERATION; slowly; SAFETY CHECKS; not

MOWER BLADE OPERATION To engage mower blades, turn engagement lever on floor slowly to the "ON" position. To Disengage mower blades, turn lever slowly to the "OFF" position. SAFETY CHECKS IMPORTANT - PERFORM SAFETY CHECKS AFTER MAKING ANY REPAIRS OR ADJUSTMENTS • ' • ' - ' • • ••' * ...

Page 7 - 1 2 T R A N S A X L E A S S E M B L Y

Other Dixon Models