Page 2 - IMPORTANT - READ CAREFULLY; The Dixon® ZTR
IMPORTANT - READ CAREFULLY The Dixon® ZTR ® , Mower is both easy and fun to operate. However, any power mower must be operated properly to be safe. It is not a toy or a recreational vehicle. Before you start to use the mower, read the operator's manual carefully, and become completely familiar with ...
Page 3 - INDEX
INDEX SAFETY................................................................Pages 1 - 6 WARRANTY POLICY ............................................ Page 7 SPECIFICATIONS ................................................. Pages 8 SEAT ADJUSTMENT.............................................Page 9 CONT...
Page 4 - The most common causes of injury to the operator or bystander...; SAFETY; BLADE CONTACT; Page 1
RIDING LAWNMOWERS, IF IMPROPERLY OPERATED, CAN CAUSE SERIOUS INJURY OR DEATH The most common causes of injury to the operator or bystander... SAFETY BLADE CONTACT RUN-OVER TIP-OVER RUN-OVER Page 1
Page 5 - will; Warning; could; Caution
SAFETY SYMBOLS: SAFETY ALERT SYMBOL - When you see this symbol, BE ALERT to the potential for injury. Follow recommended safety precautions and safe operating practices. Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Warning indicate...
Page 6 - serious injury or death.
This cutting mower is capable of amputating hands and feet, and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. GENERAL OPERATION: • Read, understand, and follow all instructions in the manual and on the mower before starting. • Only al...
Page 7 - DO
SLOPE OPERATION: Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it. DO Mow across the slope with your Dixon ZTR - never ...
Page 8 - • Be alert and turn mower off if a child enters the area.; Page 5
CHILDREN: Tragic accidents can occur if the operator is not alert to the presence of children. Children are attracted to lawn mowers and the mowing activity. NEVER assume children will stay where they were last seen. Be alert to avoid accidents. • Keep children out of the mowing area and under the w...
Page 10 - DIXON LIMITED WARRANTY POLICY -- MODEL ZTR 2301; SEE DEALER FOR DETAILS; Page 7
DIXON LIMITED WARRANTY POLICY -- MODEL ZTR 2301 This warranty policy applies to all 2301 mowers purchased on or after October 1,1993. WARRANTY: Dixon Warranty term is for a period of one (1) year from date of purchase or 200 hours of use, whichever occurs first. Mowers used for residential homeowner...
Page 11 - SPECIFICATIONS
SPECIFICATIONS The monocoque design chassis of the Model ZTR 2301 incorporates CMC laser and CNC brake processes to form the twin 12 gauge side frames and 7 gauge transmission and engine base plate. All body parts are made of rotational molded polyethylene. Front body contains access panel for batte...
Page 12 - SEAT ADJUSTMENT INSTRUCTIONS; Raise and push seat assembly forward.; Page 9
SEAT ADJUSTMENT INSTRUCTIONS Model ZTR 2301 1. Raise and push seat assembly forward. 2. Loosen five nuts, P/N 3205, and slide seat forward or backward to desired position. 3. Re-tighten nuts, P/N 3205. DO NOT operate mower without seat adjustments properly tightened. 4. Push seat assembly back to cl...
Page 13 - CONTROLS
Page 14 - fingertip
CONTROLS The Dixon ZTR has a unique transaxle that requires only two drive levers to control braking, turning, speed, and direction. On initial operation, set throttle speed on slow and operate with mower blade "OFF". To avoid "over-controlling" the mower, use a light touch on the dr...
Page 15 - TWIN FUNCTION THROTTLE CONTROL LEVER:
TO GO FORWARD: From neutral position, gently push both drive levers forward. To increase speed, move levers farther forward. TO GO BACKWARD: From neutral position, gently pull both drive levers toward you. TURNING: Turning is controlled by moving one drive lever slightly forward or rearward of the o...
Page 16 - MOWER DECK CUT HEIGHT LIFT LEVER:
CONTROLS BLADE DRIVE: Located to left of operator. . To engage the mower blade, turn lever on floor slowly to the "ON" position. To disengage mower blade, turn lever to the "OFF" position. MOWER DECK CUT HEIGHT LIFT LEVER: Located to left of operator. Controls the cutting height. Sev...
Page 17 - OPERATION INSTRUCTIONS; NEVER; BEFORE OPERATING MOWER:; Read engine manufacturer's operating and maintenance
OPERATION INSTRUCTIONS The safe and successful operation of the Model ZTR 2301 will depend upon the operator ha ving the correct knowledge of all controls used on the mower and making good judgements about the terrain to be mowed. NEVER allow anyone to operate the mower without complete knowledge of...
Page 18 - BLADE DRIVE SWITCH TEST:; a. With either electric blade drive switch turned
OPERATION INSTRUCTIONS PARKING BRAKE SWITCH TEST: With parking brake in the OFF position, engine should not turn over or attempt to start when the key switch is moved to the start position. BLADE DRIVE SWITCH TEST: (Electric Clutch or Manual Drive) a. With either electric blade drive switch turned o...
Page 19 - and to maintain mower deck blade speed.
OPERATION INSTRUCTIONS START\NG INSTRUCTIONS: 1. Move throttle control to "Choke" position if engine is cold, full throttle if warm. 2. Insert ignition key and turn to "Start" position. When engine starts, release ignition key. Key will return to "Run" position. 3. Move throt...
Page 20 - MOWING WITH A MULCHING ATTACHMENT:; Do Not Attempt To Cut Grass When It Is Wet.
OPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT: Mulching or recycling the grass clippings requires a totally different mowing approach than would be normal when side discharging or bagging the grass. There may be instances or conditions where it is not possible to hide all of the recycled ...
Page 21 - MOWING WITH A GRASS CATCHER ATTACHMENT:; read and follow the tips listed below.; CAUTION
OPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENT: In order to achieve optimum performance when mowing with a grass catching attachment, please read and follow the tips listed below. 1. Set engine speed control to the wide open or full setting. 2. Do Not Attempt To Cut Grass When It Is W...
Page 22 - SIDE DISCHARGE OF THE CLIPPINGS:; GRASS HEIGHT SUGGESTIONS:; Correct mowing height can reduce weeds and disease by 50 to 80%
OPERATION INSTRUCTIONS SIDE DISCHARGE OF THE CLIPPINGS: In order to achieve optimum performance when side discharging the grass clippings, please read and follow the tips listed below. Additional information can be found in the troubleshooting guide on Page 28. Be sure that deflector is properly ins...
Page 23 - CARE AND MAINTENANCE - MODEL ZTR 2301; MAINTENANCE SCHEDULE:; Before performing any maintenance,
CARE AND MAINTENANCE - MODEL ZTR 2301 This portion of the Model ZTR 2301 owners manual deals with normal service items which can be performed by the owner. Please remember that if you are in doubt as to the correct service procedures to be followed, these and other service situations can be handled ...
Page 24 - CUTTER BLADE MAINTENANCE:; Observe proper blade position prior to removal.; Wear heavy, thick gloves when holding onto cutter blade,
CARE AND MAINTENANCE - MODEL ZTR 2301 CUTTER BLADE MAINTENANCE: NOTE: Observe proper blade position prior to removal. 1. Safely raise front of mower. 2. Hold or block blade from turning. Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade. NOTE: Be sure blade i...
Page 25 - Manual Clutch: No Adjustment
CARE AND MAINTENANCE - MODEL ZTR 2301 Manual Clutch: No Adjustment 1. Place cut height lever in lowest cut position. 2. Loosen belt keepers on each side of engine pulley. 3. Remove deck drive belt from engine pulley. 4. Using a slight upward twisting motion, remove link from engagement handle. 5. Tu...
Page 26 - Always
CARE AND MAINTENANCE - MODEL ZTR 2301 FUEL SHUT OFF VALVE: The fuel shut off valve is located at the bottom rear of the fuel tank. Always turn the valve to the "OFF" position when the mower is stored or not in use. LUBRICATION: CHASSIS: LOCATIONS: SERVICE INTERVALS: RECOMMENDED GREASE: Numbe...
Page 27 - HOT oil may cause burns.; Push; PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS
CARE AND MAINTENANCE - MODEL ZTR 2301 HOT oil may cause burns. Allow engine to cool before draining oil. CHANGING THE ENGINE OIL: 1. The "snap lock" oil drain valve is located on the left side of the engine crank-case. 2. Place a suitable container under the drain valve. The fitting of a sho...
Page 28 - DRIVE SYSTEM ADJUSTMENTS:; Front and rear tires must be inflated to proper specifications.; REAR CHAIN ADJUSTMENT:
CARE AND MAINTENANCE - MODEL ZTR 2301 DRIVE SYSTEM ADJUSTMENTS: Due to both the complex nature of the transmission and the number of special tools required for service, adjustments should be entrusted to your dealer. There are a number of simple owner service items which greatly influence the perfor...
Page 29 - PLEASE HELP PROTECT THE ENVIRONMENT BY AVOIDING ALL
CARE AND MAINTENANCE - MODEL ZTR 2301 Correct tire pressure is important for correct operation of mower. Front Tires 410 X 350 X 4 Air Pressure 16-21 Ibs. Rear Tires 16 X 650 X 8 Air Pressure 8-14 Ibs. NOTE: Check lug nuts periodically for tightness. ELECTRICAL SYSTEMS: Keep all connections clean an...
Page 30 - STANDARD SERVICE PARTS LIST; Engine To Mower Deck:; KOHLER AIR FILTER PART NUMBERS:; Protect
STANDARD SERVICE PARTS LIST Standard: P/N 2483 Hi-Lift: P/N 2484 (Without notch, not for use with booster ring) Hi-Lift: P/N 2485 (Blade is notched for use with booster ring) Engine To Mower Deck: P/N 7725 Engine To Transmission: P/N 7650 KOHLER AIR FILTER PART NUMBERS: Please refer to Kohler Engine...
Page 31 - TROUBLESHOOTING; CAUSES
TROUBLESHOOTING MOWER CUT QUALITY: There are many variables that can effect the cut quality of any riding mower. Type and conditions of grass, cut height setting, engine RPM and ground speed are some of the variables that interact creating differences in cut quality. Examination of one or more of th...
Page 32 - Drive adjustment; SITUATION; Operation of mower
TROUBLESHOOTING Mower pulls to one side or the other Drive adjustment Consult your dealer for repair DRIVE SYSTEM: SITUATION CAUSES REMEDY Poor driving performance Operation of mower Review operators section of owners manual Page 29
Page 33 - REMEDY
TROUBLESHOOTING ELECTRICAL SYSTEM: Circuit breaker engaged Push button to reset Consult your dealer for repair Battery discharge Poor connections on battery Battery water low Wrong battery installed in mower Tighten or replace as required Battery discharge Engine electrical system Have electrical sy...
Page 39 - PURCHASED FROM; Name; Address
OWNER INFORMATION DATE PURCHASED ______________ MOWER MODEL NUMBER ________ PURCHASED FROM Name Address MOWER SERIAL NUMBER ___DM -______________________________________________ DATE ENGINE TUNED: DIXON INDUSTRIES, INC A BLOUNT COMPANY AIRPORT INDUSTRIAL PARK PO BOX 1569 COFFEYVILLE KS 67337 O945 31...
Page 40 - NOTES
