Page 2 - IMPORTANT - READ CAREFULLY
IMPORTANT - READ CAREFULLY The Dixon® ZTR® mower is both easyand fun to operate. However, any powermower must be operated properly to besafe. It is not a toy or a recreationalvehicle. Before you start to use themower, read the operator’s manualcarefully and become completely familiarwith the control...
Page 3 - INDEX; Page
INDEX Page Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12Warranty Policy. . . . . . . . . . . . . . . . . . . . . . . . . . .13Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . .14Seat Adjustment Instructions. . . . . . . . . . . . . . . . .15Controls. . . ....
Page 4 - SAFETY; IF IMPROPERLY OPERATED; The most common causes of injury to the operator or bystander...
44 Blade Contact Tip Over Run Over Back Over SAFETY RIDING LAWN MOWERS, IF IMPROPERLY OPERATED CAN CAUSE SERIOUS INJURY OR DEATH The most common causes of injury to the operator or bystander... . ..read and understand this manual to prevent injuries. 4
Page 5 - Follow recommended safety precautions; DANGER
Safety Alert Symbol When you see this symbol, BE ALERT to the potential for injury. Follow recommended safety precautions and safe operating practices. 5 DANGER (highlighted in red) indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING (hi...
Page 8 - DO
SLOPE OPERATION: Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death. All slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it! DO Mow across the slope with your Dixon ZTR - never...
Page 12 - Be alert and turn mower off if a child enters the area.
CHILDREN: Tragic accidents can occur if the operator is not alert to the presence of children. Children are attracted to lawn mowers and the mowing activity. NEVER assume children will stay where they were last seen. Be alert to avoid accidents. Keep children out of the mowing area and under thewatc...
Page 14 - SPECIFICATIONS
Speedztr 42 & Speedztr 36 Chassis: 11 gauge steel welded frame assembly Body: All body parts made of high density polyethylene. Dent and corrosion resistant. Mower Deck: 36” Deck: 11 GA fabricated construction-36” cut width 42” Deck: 13 GA stamped steel construction-42” cut width Blade Drive: El...
Page 15 - Slide seat forward or backward.
SEAT ADJUSTMENT INSTRUCTIONS Speedztr 1. Grasp seat slide adjuster and move it intoadjustment position. 2. Slide seat forward or backward. 3. Release seat slide adjuster. 15
Page 16 - CONTROL LEVERS; Note: For access to the seat, move control levers to neutral; CONTROLS
CONTROL LEVERS Note: For access to the seat, move control levers to neutral position and swing them outward. T O G O F O R W A R D • From neutral position, gently push control levers forward. • To increase speed, move levers further forward. TO GO BACKWARDS • From neutral position, gently pull contr...
Page 17 - TO SET PARKING BRAKE:; TRANSMISSION DRIVE SYSTEM; CAUTION
PARKING BRAKE: The parking brake is designed to hold themower from moving and is not intended for usein stopping the mower while it is in motion. Theengine will stop if the parking brake is engagedwhile the control levers are in the drive position. Engage parking brakebefore starting engine. TO SET ...
Page 19 - NEVER; B E F O R E O P E R A T I N G M O W E R :; OPERATION INSTRUCTIONS
The safe and successful operation of the DixonSpeedztr will depend upon the operator having thecorrect knowledge of all controls used on the mowerand making good judgements about the terrain to bemowed. NEVER allow anyone to operate the mower without complete knowledge of all controls and their func...
Page 20 - TESTING OF SAFETY INTERLOCK
PARKING BRAKE SWITCH TEST: a ) Swing out control leversb ) Disengage blade drive switchc) Put parking brake in OFF positiond ) Turn ignition switch to START Engine should not turn over or attempt to start. CONTROL LEVER SWITCH TEST: a ) Disengage blade drive switchb ) Put parking brake in ON positio...
Page 23 - STARTING INSTRUCTIONS:
STARTING INSTRUCTIONS: 1. Parking brake must be on, control levers swung out, and blade drive disengaged. 2. Move throttle control to “choke” position if engine is cold, full throttle if warm. 3. Insert ignition key and turn to “start” position. When engine starts, release ignition key. Key will ret...
Page 24 - MOWING WITH A MULCHING ATTACHMENT:; Do Not Attempt To Cut Grass When It Is Wet.
MOWING WITH A MULCHING ATTACHMENT: Mulching or recycling the grass clippings requires a totallydifferent mowing approach than would be normal whenside discharging or bagging the grass. There may beinstances or conditions where it is not possible to hide allthe recycled or mulched clippings. In order...
Page 25 - MOWING WITH A MULCHING ATTACHMENT; Keep the Underside Of The Mower Deck Clean.
MOWING WITH A MULCHING ATTACHMENT ( continued): 6. Keep the Underside Of The Mower Deck Clean. Remove all grass and dirt build-up from the undersideof the pan, the baffles and deflectors after each use. 7. Alternate mower direction. This will evenly disperse the mulched grass clippings over the lawn...
Page 26 - MOWING WITH A GRASS CATCHER; Set engine speed control to the wide open or full
MOWING WITH A GRASS CATCHER ATTACHMENT: In order to achieve optimum performance when mowingwith a grass catching attachment, please read and followthe tips listed below. 1. Set engine speed control to the wide open or full setting. 2. Do Not Attempt To Cut Grass When It Is Wet. Wet grass will clog b...
Page 27 - Do Not
OPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENT (continued): 7. Some mowing applications/use of grasscatchers may require that an optional weight boxbe fitted to the mower to counter the weight ofgrass in the bags. Please consult with yourdealer for more information regarding installat...
Page 28 - Set engine speed control to the wide open or full
SIDE DISCHARGE OF THE CLIPPINGS: In order to achieve optimum performance when Sidedischarging the grass clippings, please read and followthe tips listed below. Additional information can befound in the troubleshooting guide. CAUTION Be sure that the deflector is properlyinstalled on the discharge ch...
Page 30 - MAINTENANCE SCHEDULE
CARE & MAINTENANCE CAUTION Before performing any maintenance, turn off engine, allow to cool & remove key. Use extreme care when working on machinery. Do not wear watch or jewelry. Do not wear loose fitting clothes, and observe all common safety practices with tools. MAINTENANCE SCHEDULE • C...
Page 31 - OFF SEASON BATTERY STORAGE:
CARE & MAINTENANCE ENGINE: For complete maintenance and operating information of the engine,please refer to the maintenance instructions furnished by theengine manufacturer and included in your Zero Turn Radius mowerinformation packet. BATTERY: •This is a maintenance-free battery and the fluid l...
Page 32 - CUTTER BLADE MAINTENANCE:; C A U T I O N Stop engine and remove ignition key; Hold or block blade from
CARE & MAINTENANCE CUTTER BLADE MAINTENANCE: C A U T I O N Stop engine and remove ignition key for safety. Wear heavy, thick gloveswhen holding onto cutter blade, avoidthe sharp edge of the blade. Blades should be discarded when worn excessively. D A N G E R O U S !DO NOT USEBLADE IN THISCONDITI...
Page 36 - CARE AND MAINTENANCE; MOWER DECK LEVELING PROCEDURE:; If adjustment is
CARE AND MAINTENANCE MOWER DECK LEVELING PROCEDURE: 1. Place mower on a smooth, level surface and check tire pressures to insure correct stance.Tires should be inflated as follows. Front: 16 - 21 lbsRear: 8 - 14 lbs 2. Turn each outer blade tip to align with the deck in a side to side manner. 3. Mea...
Page 37 - MOWER DECK LEVELING PROCEDURE; NOTE: This will place the mower deck in a base
CARE & MAINTENANCE MOWER DECK LEVELING PROCEDURE (continued): NOTE: This will place the mower deck in a base measurement position. Additionaladjustment may be required to achievedesired cut for the type of grass orconditions involved. 37
Page 38 - The “Dapco” oil drain valve is located on the left
Hex Head Valve Stem CARE & MAINTENANCE HOT oil may cause burns. Allow engine tocool before draining oil. CAUTION CHANGING THE ENGINE OIL: 1. The “Dapco” oil drain valve is located on the left side of the engine crankcase. 2. Place a suitable container under the drain valve hose. 3. To drain, tur...
Page 40 - NEUTRAL ADJUSTMENT
CARE & MAINTENANCE NEUTRAL ADJUSTMENT DRIVE MACHINE UNTIL HYDROSTATS HAVE WARMED UP.WITH ENGINE RUNNING AND THE PARKING BRAKE OFF, SWINGOUT THE CONTROL LEVERS. IF MACHINE STARTS TO CREEP,FOLLOW THE INSTRUCTIONS BELOW. 1. Stop the engine, engage parking brake and raise rear of frame with jack or ...
Page 43 - STANDARD SERVICE PARTS LIST
STANDARD SERVICE PARTS LIST 42” Deck ~Blades~ Hi-Lift - P/N 8688 (Standard) Lo-Lift - P/N 6236 ~Belts~ Engine to Mower Deck - P/N 6111 Serpentine - P/N 6109 Engine to Transmission - P/N 16108 36” Deck ~Blades~ Hi-Lift - P/N 8688 (Standard) Lo-Lift - P/N 6236 ~Belts~ Engine to Mower Deck - P/N 61515 ...
Page 44 - BRIGGS & STRATTON AIR AND OIL FILTERS
BRIGGS & STRATTON AIR AND OIL FILTERS Refer to Briggs & Stratton Engine Operator’sManual for correct service intervals for engineoil changes and air filter maintenance. Protect your engine investment, use onlyoriginal equipment filters. Refer to the Briggs& Stratton Engine Operator’s Man...
Page 45 - TROUBLESHOOTING
TROUBLESHOOTING 1. ENGINE WON’ T TURN OVER Mower blades engaged- - - - - - - - - - - - - - - - - - - disengage bladesParking brake not on- - - - - - - - - - - - - - - - - - engage parking brakeCircuit breaker trips- - - - - - - - - - - - - - - - - - - - - - - - -reset breakerDead battery- - - - - - ...
Page 48 - Dixon® and ZTR® are registered trademarks of
ZTR®Mowers ZTR®Mowers ZTR®Mowers ZTR®Mowers ZTR®Mowers W W W W WA R N I N G : A R N I N G : A R N I N G : A R N I N G : A R N I N G : The engine exhaust from this productcontains chemicals known to the State ofCalifornia to cause cancer, birth defects orother reproductive harm. Dixon® and ZTR® are r...
