Digicom 8E4338 - Manual

Digicom 8E4338

Digicom 8E4338 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

NETWORKING - BRIDGE/ROUTER SHDSL

For further information: [email protected] or http://www.digicom.it

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective o

wners.

ROUTER SHDSL

ITU-T G.991.2 standard

Symmetric speed up to 2.3/4.6 Mbps

Autoadaptative connection speed

ATM and PPP Protocols

ATM Adaptation Layer Type 5 (AAL5)

Multiple Protocol over AAL5 (RFC 2648,

formerly RFC 1483)

Bridged or router Ethernet encapsulation

VC and LLC based multiplexing

PPP over Ethernet (PPPoE)

PPP over ATM (RFC 2364)

Classical IP over ATM (RFC 1577)

MAC Encapsulated Routing (RFC 1483

MER)

OAM F4/F5

Protocols & Network Functionalities

Nat, static routing and RIP 1/2

Dynamic Domain Name System (DDNS)

Virtual Server and DMZ

SNTP, DNS relay and IGMP proxy

QoS support

Firewall

Stateful Packet Inspection (SPI)

Prevent DoS, Packet filtering, URL

blocking

DESCRIPTION

Michelangelo SHDSL is a Bridge/Router with SHDSL

technology for connections up to 4.6 Mbps (4 wires

connection), or up to 2.3 Mbps (2 wires connection).

The SHDSL technology, so as the HDSL, carries out

symmetric connections, that is the downstream and the

upstream are the same. This is its main feature if

compared with the ADSL technology that carries out

asymmetric connections (the upstream is lower than the

downstream).

T h e s e t w o x D S L t e c h n o l o g i e s ( s y m m e t r i c a n d

asymmetric) allow to choose the best solution for the

application to be carried out or for the service to be

offered.

With the Michelangelo product line, digicom satisfies any

kind of application.

The typical application of Michelangelo SHDSL is the

point-to-point Bridge that allows the connection of two

LANs over the leased line or through a VPN via Internet.

Michelangelo SHDSL uses the traditional twisted pair

(metallic continuity is needed). In case of campus

applications (inside a private estate) it is not necessary

to buy leased lines (CDA), but you can use proprietary

lines.

Michelangelo SHDSL

Code: 8E4338

LAN

LAN

Michelangelo

SHDSL

Michelangelo

SHDSL

2 or 4 wires

Point-to-Point LAN to LAN Bridge Connection

Michelangelo SHDSL 03.07.2006

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Digicom Models

All Digicom Other