Page 3 - Table of Contents; Supported Graphics Modes and Refresh Rate Selection.. 9
i Table of Contents 1 Important Safety Instructions .......................................... 1 1 2 Features............................................................................. 2 2 3 3 Unpacking the Monitor ..................................................... 3 4 Hardware Installation ......
Page 4 - ii; Disclaimer; Reference Information; Monitor Information; Diamond Digital DV175; Dealer Information
ii Disclaimer Mitsubishi Electric Australia Pty. Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, Mitsubishi Electric Australia rese...
Page 5 - Important Safety Instructions; covers may expose you to dangerous voltages or other hazards.
1 1 1 1 Important Safety Instructions Please read the following safety instructions before installing or cleaning your Diamond Digital monitor: 1. Unplug the monitor’s power cable from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a soft cloth to clean the monitor housi...
Page 6 - Features; Your Diamond Digital DV175 Monitor features:
2 2 2 2 Features Your Diamond Digital DV175 Monitor features: ♦ XGA (1280 x 1024 pixel) Resolution LCD Panel ♦ High Brightness – 300 cd/m 2 (typical) ♦ High Contrast Ratio – 500:1 (typical) ♦ True Colour Display With FRC support for 16.7M colours, the Diamond Digital DV175 monitor offers you better ...
Page 7 - Unpacking the Monitor; immediately; LCD monitor; DVI Cable; VGA Cable
3 3 3 3 Unpacking the Monitor Please check that the following items are included with your monitor. If they are missing or damaged, please contact your place of purchase immediately . Note: There is an anti-scratch protective cover on the back lit logo at the rear of the monitor, which can be peeled...
Page 8 - AC Adapter; Power Cord
4 4 AC Adapter Power Cord Audio Cable Locate the model name and the serial number label on the back of your monitor, and write the details of the monitor and your place of purchase in the space on page (ii) of this manual for future reference.
Page 9 - Hardware Installation; Viewing Angle Adjustment; Figure 1-1; VESA Mounting Instructions; degree. Then apply a little bit more
5 5 4 4 Hardware Installation Viewing Angle Adjustment T h e L C D M o n i t o r i s d e s i g n e d t o a l l o w u s e r s t o h a v e a c o m f o r ta b l e v i e w i n g a n g l e . T h e v i e w i n g a n g l e c a n b e a d j u s t e d f r o m - 5 ° t o + 1 5 ° . ( S e e f i g . 1 - 1 ) Figure...
Page 11 - Windows driver Installation; drivers are required to be loaded.; Add New Hardware; Just follow the prompts to load the native Plug and Play drivers.; Windows XP; XP will automatically load the native Plug and Play drivers.
7 7 5 5 Windows driver Installation The DV175 is fully Windows Plug and Play compatible so no specific Windows drivers are required to be loaded. Windows 98, ME, and 2000 The first time you start Windows after connecting your new monitor, the system will detect the monitor and automatically start th...
Page 12 - Setting the Display Resolution; Choosing The Best Resolution; Display; For Windows NT users only:; Test
8 8 6 6 Setting the Display Resolution Choosing The Best Resolution All Liquid Crystal Displays (LCDs) have a fixed resolution that is the same as the maximum resolution that may be displayed on the LCD. In the case of the DV175 the LCD resolution is 1280 x 1024 pixels. This is also known as the “na...
Page 13 - Supported Graphics Modes and Refresh Rate Selection; Table 1
9 9 If you are using an Apple Macintosh, change the resolution by doing the following: MacOS 8.x/9.x 1. Click the Apple icon at the top, left corner of the screen, select Control Panel and then select Monitors . 2. Select a resolution of 1280 x 1024 pixels with between 60Hz and 75Hz refresh rate. 3....
Page 15 - Standard Timing Table; most suitable available timing.
11 11 Table 1 Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. Resolution Horzontal Frequency (kHz) Vertical Frequency (Hz) Dot Clock Frequency (MHz) Remark 640x350 31.469 70.087 25.175 DOS 640x400 24.83 56.42 ...
Page 16 - Adjusting the Monitor; User Controls; Stereo Speakers; PC Audio Stereo output.; Power; Press the power switch to switch the monitor ON/OFF.
12 12 7 7 Adjusting the Monitor User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 Stereo Speakers PC Audio Stereo output. 2 Power Switch Press the power switch to switch the monitor ON/OFF. 3 Power-On Indicator LED lights Green colou...
Page 17 - Adjusting the Monitor's Display; OSD Function Menu; Function Description; Icon
13 13 Adjusting the Monitor's Display OSD Function Menu To access the OSD Main menu, simply press one of the Function Select control buttons, and the menu diagram will pop up on the screen as shown on Fig. 2-2: Continue pressing the Function Select buttons to scroll through the available menu items,...
Page 18 - User; Picture Optimisation; The easiest way to obtain an optimal picture is by using the; Auto; function in the
14 14 Colour Temperature This function lets you select a colour temperature. Using the Adjustment Control buttons to select the required colour temperature. Please see the diagram below for function and description. (Not available when using DVI). OSD H. Position This function moves the OSD menu win...
Page 19 - Manual Picture Adjustment; Clock
15 15 computer’s graphics adaptor is replaced. If you are still not satisfied with the result, you can enhance the image by using the monitor’s manual adjustment functions. Manual Picture Adjustment Adjustments to the displayed image and audio volume are made using the On-Screen Display (OSD), and t...
Page 21 - Frequently Asked Questions; The image is blurred, how can I get the best quality picture?
17 17 8 8 Frequently Asked Questions The image is blurred, how can I get the best quality picture? ♦ Read chapter 6, Setting the Display Resolution , and select a graphics signal with the correct resolution and refresh rate. Then read chapter 7, Adjusting the Monitor , and make adjustments to the di...
Page 22 - The image is or distorted, flashes or flickers:
18 18 No image is displayed, what can I do? ♦ Check that the light (LED) next to the monitor’s power button is lit and is green in colour. If the LED is green, press one of the Function Select buttons on the monitor to access the On Screen Display. If the message NON PRESET MODE appears there, pleas...
Page 23 - Specifications; Display Characteristics; Including 12 VESA & 3 DOS
19 19 9 9 Specifications Model: Diamond Digital DV175 Display Characteristics Display Type 17“ active matrix Thin Film Transistor Liquid Crystal Display Viewable Diagonal Area 43 cm / 17” Native (Maximum) Resolution 1,280 x 1024 pixels Colours 16.7 million (6bpp+dithering) Contrast Ratio 500:1 (typi...
Page 24 - Input Signal; 4 – 80kHz multi-frequency; Physical Characteristics; VESA DPMS, Energy Star; Regulatory Certification
20 20 Input Signal Line Frequency 24 – 80kHz multi-frequency Image Frequency (Refresh Rate) 49 - 75Hz Video Signal RGB analogue (Positive polarity) 0.7 Vpp/75 Ohm Synchronization TTL separate, composite TTL Signal Connection 15-pin mini D-sub and 24 pin DVI-D connectors Physical Characteristics Powe...
Page 25 - Service Contacts; Australian Service Contacts
21 21 1 1 0 0 Service Contacts If problems remain after checking this manual, please contact your place of purchase or contact: Australian Service Contacts Visit the Customer Support section of Mitsubishi Electric Australia’s web site at www.mitsubishielectric.com.au for details of your nearest Mits...
Page 26 - New Zealand; BDT New Zealand Ltd.
22 22 Victoria and Tasmania 4 / 303 Burwood Hwy East Burwood, VIC, 3151 Telephone: (03) 9262-9899 Fax: (03) 9262-9850 Western Australia 5 / 329 Collier Road Bassendean, WA, 6054 Telephone: (08) 9377-3411 Fax: (08) 9377-3499 New Zealand Contact: BDT New Zealand Ltd. 1 Parliament St. Lower Hutt Wellin...
