Diamond Multimedia DV170J/JB - Manual

2 2 2 2 Features Your DV170J/JB Monitor features: ♦ XGA (1280 x 1024 pixel) Resolution LCD Panel ♦ High Brightness Level – 270 cd/m 2 (typical) ♦ High Contrast Ratio – 450:1 (typical) ♦ Response Rate – 12 ms (Typical) (Tr+Tf) ♦ True Colour Display With 16.2M (6bit + FRC) colour, the DV170J/JB monito...

3 3 3 3 Unpacking the Monitor Please check that the following items are included with your monitor. If they are missing or damaged, please contact your place of purchase immediately . LCD monitor User’s Manual Use r's Ma nua l VGA Cable Power Cord

5 5 4 4 Hardware Installation Connecting the Monitor Base Remove the base from the packing box and place it on the desk. Next, remove the LCD display and carefully seat it on the base. (See fig.1-1 ) Figure 1-1 Viewing Angle Adjustment The LCD Monitor is des igned to allow users to have a comfortabl...

7 7 5 5 Windows driver Installation The DV170J/JB is fully Windows Plug and Play compatible so no specific Windows drivers are required for installation. Windows 98, ME, and 2000 The first time you start Windows after connecting your new monitor, the system will detect the monitor and automatically ...

8 8 6 6 Setting the Display Resolution Choosing The Best Resolution All Liquid Crystal Displays (LCDs) have a fixed resolution that is the same as the maximum resolution that may be displayed on the LCD. In the case of the DV170J/JB the LCD resolution is 1280 x 1024 pixels. This is also known as the...

9 9 If you are using an Apple Macintosh, change the resolution by doing the following: MacOS 8.x/9.x 1. Click the Apple icon at the top, left corner of the screen, select Control Panel and then select Monitors . 2. Select a resolution of 1280 x 1024 pixels with between 60Hz refresh rate. 3. If refre...

11 11 Table 1 Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. TIMING FH(KHZ ) SYNC TOTAL ACTIVE SYNC FRONT BACK PIXEL FV(HZ) WIDTH PORCH PORCH POLARITY (DOT/ LINE) (DOT/ LINE) (DOT/LINE) (DOT/LINE) (DOT/LINE) ...

13 13 7 7 Adjusting the Monitor User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 Soft Power Switch Press the power switch to switch the monitor ON/OFF. 2 Power-On Indicator LED lights Green color --- Power is ON. LED lights Yellow -...

14 14 Adjusting the Monitor's Display The monitor has four function control buttons to select among functions shown on OSD menu, designed for easy user-viewing environments. OSD Function Menu To access the OSD Main menu, simply press one of the Function Select control buttons, and the menu diagram w...

15 15 Colour Temperature This function lets you select a colour temperature. Using the Adjustment Control buttons to select the required colour temperature. Please see the diagram below for function and description. (Not available when using DVI). OSD H. Position This function moves the OSD menu win...

16 16 The monitor will remember the settings obtained by the auto calibration settings and use them whenever you turn the monitor on. Note that you may need to readjust the monitor if it is connected to a different computer or if the computer’s graphics adaptor is replaced. If you are still not sati...

18 18 8 8 Frequently Asked Questions The image is blurred, how can I get the best quality picture? ♦ Read chapter 6, Setting the Display Resolution , and select a graphics signal with the correct resolution and refresh rate. Then read chapter 7, Adjusting the Monitor , and make adjustments to the di...

19 19 No image is displayed, what can I do? ♦ Check that the light (LED) next to the monitor’s power button is lit and is green in colour. If the LED is green, press one of the Function Select buttons on the monitor to access the On Screen Display. If the message NON PRESET MODE appears there, pleas...

20 20 9 9 Specifications Model: DV170J/JB Display Characteristics Display Type 17“ active matrix Thin Film Transistor Liquid Crystal Display Viewable Diagonal Area 43 cm / 17” Native (Maximum) Resolution 1280 x 1024 pixels Colours 16 million (6 bit + FRC) Contrast Ratio 450:1 (typical) Brightness 26...

21 21 Input Signal Line Frequency 24 – 80kHz multi-frequency Image Frequency (Refresh Rate) 49 - 75Hz Video Signal RGB analogue (Positive polarity) 0.7 Vpp/75 Ohm Synchronization TTL separate, composite TTL Signal Connection 15-pin mini D-sub Physical Characteristics Power Management VESA DPMS, Ener...

22 22 1 1 0 0 Service Contacts If problems remain after checking this manual, please contact your place of purchase or contact: Australian Service Contacts Visit the Customer Support section of Mitsubishi Electric Australia’s web site at www.mitsubishielectric.com.au for details of your nearest Mits...