Dewalt VL-MR4 - Manual
Dewalt VL-MR4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
VL-MR4 Multi Resource Charger/PSU
The Hawk-Woods MR (Multi Resource) battery charger features include,
•
Universal Mains Input
•
Charging of all V-Lok Ni-Cad, Ni-Mh and Lithium Batteries
•
Compatible with Sony batteries
•
Able to charge NP1s using Hawkwoods adaptor
•
13.8V 60Watt AC Adaptor (PSU)
•
12V In-Car vehicle charging
•
Revitalise battery function
USER INSTRUCTIONS / SPECIFICATION
Mains Input:
Suitable for worldwide use (90-260VAC 50~60Hz). This product is class 1 and
must be earthed. These chargers are CE marked and have been designed to comply with all
relevant safety/EMC regulations.
Important Note: Do not cover vents!
Battery Charging:
The VL-MR4 is a four channel sequencer quick charger, and suitable for
charging the following battery types,
•
Any NP1 Ni-Cad or Ni-Mh battery. (12-14V 1.5-4Ah)
•
Hawk-Woods Lithium Ion NP50/NP60/NP65 battery packs. (14.4V 50-60-65Watts)
•
All V-Lok battery chemistries
•
Suitable for charging Sony type V-Mount batteries
Recharge time – Fully Discharged V-lok battery packs
VL-32
V-Lok 13.2V 32 W Battery Pack (Ni-Cad)
75 mins
VL-65
V-Lok 14.4V 65 Watt Battery Pack (Li-Ion)
220 mins
VL-100
V-Lok 14.4V 100 Watt Battery Pack (Li-Ion)
270 mins
VL-160
V-Lok 14.4V 160 Watt Battery Pack (Li-ion)
340 mins
Charger Use:
Select mains input via the rocker switch located on the rear of the VL-MR4.
Select charger function on the front of the unit. Connect the (Earthed) IEC mains cord supplied
and the RED charger LED will come on. Connect a suitable battery/batteries into the VL-MR4 for
charge.
Charge Status Indication
Yellow
Battery has been accepted and is Charging
Yellow/Green
Both LEDs flashing
Faulty/Disconnected
Green
Battery Charging complete Ready
Yellow – Green
(LEDs alternately on/off = 80% charged or more for Lithium’s Only).
In-Car Charging:
Check suitability of both the vehicle being used and it’s wiring before use.
Do not cover vents whilst in use!
•
DC Input: 11-15Volts.
•
Protection against reverse polarity fitted.
•
Low voltage detection/Indication.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
