Dewalt DWMT70782L - Manual - manualsarea.com

Page 2 - Rear

2 English A. Spindle B. Collet Nut C. Collet D. Trigger E. Safety Throttle Lever SPECIFICATIONS MODEL DWMT70782L FREE SPEED (@90PSI) 20240 RPM EXHAUST TYPE Rear COLLET DIAMETER 1/4” (6.4MM) AVERAGE AIR CONSUMPTION AT LOAD 21 SCFM (9.9 L/s)3.0 CFM (1.4 L/s) NET WEIGHT 1.17 LBS (0.5Kg.) AIR INLET SIZE...

Page 3 - The definitions below describe the level of severity; IMPORTANT SAFETY INSTRUCTIONS

3 English Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: I...

Page 4 - English

4 English WARNING: • Never trigger the tool when not applied to a work object Attachments must be securely attached. Loose attachments can cause serious injury. • Protect air lines from damage or puncture. • Never point an air tool at oneself or any other person. Serious injury could occur. • Check ...

Page 5 - WARNING: RISK OF EXPLOSION OR FIRE

5 English WARNING: RISK OF EXPLOSION OR FIRE WHAT CAN HAPPEN HOW TO PREVENT IT • Abrasive tools such as sanders and grinders, rotating tools such as drills, and impact tools such as wrenches, hammers, and reciprocating saws are capable of generating sparks which could result in ignition of flammable...

Page 6 - WARNING: RISK OF INJURY; WHAT CAN HAPPEN

6 English WARNING: RISK OF INJURY WHAT CAN HAPPEN HOW TO PREVENT IT • Tools left unattended, or with the air hose attached can be activated by unauthorized persons leading to their injury or injury to others. • Remove air hose when tool is not in use and store tool in a secure location away from rea...

Page 7 - WARNING: RISK OF ELETRIC SHOCK

7 English WARNING: RISK OF INJURY (CONTINUED) WHAT CAN HAPPEN HOW TO PREVENT IT • Improperly maintained tool and accessories can cause serious injury. • Maintain the tool with care. • There is a risk of bursting if the tool is damaged. • Check for misalignment or binding of moving parts, breakage of...

Page 8 - WARNING: RISK FROM FLYING OBJECTS

8 English WARNING: RISK FROM FLYING OBJECTS WHAT CAN HAPPEN HOW TO PREVENT IT • Air powered equipment and power tools are capable of propelling materials such as metal chips, saw dust, and other debris at high speed, which could result in serious eye injury. • Always wear ANSI Z87.1 CAN/ CSA Z94.3 a...

Page 9 - WARNING: AIR SUPPLY AND CONNECTIONS; SAVE THESE INSTRUCTIONS

9 English WARNING: AIR SUPPLY AND CONNECTIONS • Do not use oxygen, combustible gases, or bottled gases as a power source for this tool as the tool may explode, possibly causing injury. • Do not use supply sources which can potentially exceed 200 PSI (13.8bar) as tool may burst, possibly causing inju...

Page 10 - COLLET

10 English FEATURES COLLET The collet (C) allows you to securely hold the mandrel of an insert tool. The collet nut (B) and spindle (A) are designed with two flat sides each to allow for easy insert tool assembly with the sup- plied wrenches.TRIGGER The trigger (D) allows the operator to control the...

Page 11 - Air Supply; Figure A. Pneumatic tools; Safety Rules For Pneumatic Tools

11 English INSTALLATION Air Supply The recommended hook-up is shown in Figure A. Pneumatic tools operate on a wide range of air pressures. For maximum efficiency and longer tool life, the pressure of the air supplied to these tools MUST not exceed the rated PSI at the tool when the tool is running. ...

Page 12 - Proper Use Of The Tool; CAUTION: This air tool requires lubrication BEFORE initial use,; lubricator (FRL) is used as shown in figure A on page; Using An Angle Die Grinder

12 English PREPARATION FOR USE Proper Use Of The Tool Your new Angle Die Grinder is designed for grinding and deburring operations in confined areas. This tool features a rear exhaust to direct airflow away from the work area, a built-in regulator for convenient speed control and a lock-off lever to...

Page 13 - Using An Angle Die Grinder Continued; WARNING: Risk of unsafe operation. Firmly grasp air hose; collet (C) on the air die grinder by holding the

13 English Using An Angle Die Grinder Continued 12) Always shut off the air supply to the tool and depress the trigger to release air from the feed hose before fitting, adjusting or removing the working attachment.13) Check hoses and fittings regularly for wear. Replace if necessary. Do not carry th...

Page 15 - Lubrication; To Lubricate The Air Tool Manually:; NOTE: Use SAE #10 weight oil if air tool oil is not available.; WARNING: Keep out of the reach of children. If taken internally,; SERVICE INFORMATION; WALT heavy duty industrial tools are warranted for 3 years from

15 English MAINTENANCE Lubrication Air tools require lubrication throughout the lifetime of the tools. The air motor and bearing uses compressed air to power the tool. The compressed air contains moisture that will rust the air motor and other parts in side of the tools, therefore lubrication is req...

Page 16 - GLOSSARY; OSHA certified independent safety laboratories and meet the; applicable; Underwriters Laboratories Standards for Safety.

16 English LAS CAÍDAS PUEDEN CAUSAR LESIONES GRAVES. NO PISAR NI PARARSE EN ESTA ÁREA. ADVERTENCIA LES CHUTES PEUVENT CAUSER DE GRAVES BLESSURES. NE MARCHEZ PAS ET NE VOUS TENEZ PAS SUR CET EMPLACEMENT. AVERTISSEMENT FALLS CAN CAUSE SERIOUS INJURIES. DO NOT STEP OR STAND ON THIS AREA. WARNING SEE OW...

Dewalt DWMT70782L - Manual

Table of Contents:

Summary

Other Dewalt Models