Dewalt DWE492 XE - Manual - manualsarea.com

Page 6 - Technical Data

4 English Congratulations! You have chosen a D e WALT tool. Years of experience, thorough product development and innovation make D e WALT one of the most reliable partners for professional power tool users. Technical Data DWE490 DWE492 DWE492S DWE494 Voltage V AC 230 230 230 230 UK & Ireland V ...

Page 7 - Definitions: Safety Guidelines; General Power Tool Safety Warnings; SAVE ALL WARNINGS AND INSTRUCTIONS

5 English Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury . WARNING: ...

Page 8 - ADDITIONAL SPECIFIC SAFETY RULES

6 English instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power to...

Page 9 - FURTHER SAFETY INSTRUCTIONS

7 English k) Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory. l) Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the su...

Page 10 - Additional Safety Warnings Specific

8 English the wheel thus reducing the possibility of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel flanges. f) Do not use worn down wheels from larger power tools. Wheel intended for larger power tool is not suitable for the higher speed of a smaller tool and may bu...

Page 12 - No-volt Release Switch; Mains Plug Replacement

10 English No-volt Release Switch DWE494 ONLY The on/off switch has a no-volt release function. If the tool should become disconnected from the power source for any reason, the switch has to be deliberately reactivated. Soft Start Feature DWE492S AND DWE494 The soft start feature allows a slow speed...

Page 13 - Fitting and Removing a Grinding or; ASSEMBLY AND ADJUSTMENTS

11 English Fitting and Removing a Grinding or Cutting Disc (fig. 1, 4, 5) WARNING: Do not use a damaged disc. 1. Place the tool on a table, guard up. 2. Fit the backing flange (J) correctly onto the spindle (D) (fig. 4). 3. Place the disc (O) on the backing flange (J) (fig. 5). When fitting a disc w...

Page 14 - OPERATION

12 English • Do not work with the grinding cup without a suitable guard in place. • Do not strain the machine so heavily that it comes to a standstill. After heavily straining the power tool, continue to run it at no-load for several minutes to cool down the accessory. Do not touch grinding and cutt...

Page 15 - Metal Applications; Cutting Metal; Rough Grinding

13 English Spindle Lock (fig. 1) The spindle lock (B) is provided to prevent the spindle from rotating when installing or removing wheels. Operate the spindle lock only when the tool is turned off, unplugged from the power supply, and has come to a complete stop. NOTICE: To reduce the risk of damage...

Page 17 - Protecting the Environment

15 English Max. [mm] [mm] Min. Rotation [min. -1 ] Periphical speed [m/s] Threaded hole length [mm] D b d D 180 12 M14 8,500 80 20.0 230 12 M14 8,500 80 20.0 Protecting the Environment Separate collection. This product must not be disposed of with normal household waste. Should you ﬁnd one day that ...

Page 18 - GRINDING AND CUTTING ACCESSORY CHART

16 English GRINDING AND CUTTING ACCESSORY CHART Guard Type Accessory Description How to Fit Grinder TYPE 27 GUARD Depressed centre grinding disc Type 27 guard Backing flange Type 27 depressed centre wheel Threaded clamp nut Flap wheel Wire wheels Wire wheels with threaded nut Type 27 guard Wire whee...

Dewalt DWE492 XE - Manual

Table of Contents:

Summary

Other Dewalt Models