Dewalt DW258-XE- User Manual
Dewalt DW258-XE– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – SAVE THESE INSTRUCTIONS; Definitions: Safety Guidelines
- Page 5 – Additional Safety Instructions; the cutting tool may contact hidden wiring or its own cord.; COMPONENTS
- Page 6 – Nutsetting Units; NUTSETTER; Dead Spindle Action; TO CHANGE BIT HOLDERS
- Page 7 – MAINTENANCE; DRYWALL SCREWDRIVERS:
- Page 8 – CLUTCH LUBRICATION; Repairs; FREE ONE YEAR SERVICE CONTRACT
- Page 9 – FREE WARNING LABEL REPLACEMENT:; If your warning labels become illegible or
DW251-XE, DW252-XE, DW252WT-XE, DW255-XE, DW256-XE, DW257-XE, DW258-XE,
DW260-XE, DW262-XE, DW263-XE, DW265-XE, DW266-XE, DW266-220-XE, DW267-XE,
DW268-XE, DW268G -XE, DW268-220-XE, DW269-XE, DW272-XE, DW272W-XE,
DW272WT-XE, DW274-XE, DW274W-XE, DW274-220-XE, DW276-XE, DW276-220-XE,
DW281-XE, DW282-XE, DW284-XE
SCREWDRIVERS
INSTRUCTION MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D E WALT TOOL, CALL US AT: 1800 654 155 (Aust) or 09 259 1111 (NZ). SAFETY INSTRUCTIONS FOR POWER TOOLS When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and pe...
3 Additional Safety Instructions • Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal par ts of the tool “live” and shock the operator. • Keep handles dry, clean, f...
4 NOTE: Align ribs on inside of depth locator with grooves in clutch housing before snapping into place. CHANGING BIT TIP 1. Pull forward on adjustment collar and remove it from clutch housing (Fig. 3). FIG. 3 2. Use pliers to remove worn bit and install new bit tip. DEPTH ADJUSTMENT Follow the grap...
