Dewalt DC9000 XE - User Manual

Page 3 - SAVE THESE INSTRUCTIONS; Definitions: Safety Guidelines

1 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D E WALT TOOL, CALL US AT: 1800 654 155 (Aust) or 09 526 2556 (NZ). GENERAL SAFETY INSTRUCTIONS WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term...

Page 6 - Introduction

4 MINIMUM GAGE FOR CORD SETS For Cable length (m): 7.5 15 25 30 45 60 Use Cable with minimum rating (Amperes)Tool Amperes 0 - 3.4 7.5 7.5 7.5 7.5 7.5 7.5 3.5 - 5.0 7.5 7.5 7.5 7.5 10 15 5.1 - 7.0 10 10 10 10 15 15 7.1 - 12.0 15 15 15 15 20 20 12.1 - 20.0 20 20 20 20 25 – • Do not place any object on...

Page 7 - Important Safety Instruction for Battery Packs; READ ALL INSTRUCTIONS; The RBRCTM Seal

5 to operate. Simply place your battery pack into the receptacle of a plugged in charger and it will automatically charge the pack. Important Safety Instruction for Battery Packs WARNING: For safe operation, read this manual and manuals originally supplied with tool before using the charger.When ord...

Page 9 - Motor

7 5. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil, or any buildup of metallic par ticles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before at...

Page 12 - To attach no-mar shoe cover; Cutting; WOOD CUTTING

10 Removeable No-Mar FIG. 9 G J M Shoe Cover (Fig. 9) The no-mar shoe cover (J) should be used when cutting surfaces that scratch easily, such as laminate, veneer, or paint. To attach no-mar shoe cover , place the front of the aluminum shoe (G) into the front of the no-mar shoe cover (J) and lower t...

Page 13 - CHARGER CLEANING INSTRUCTIONS; Lubrication; Repairs; FREE ONE YEAR SERVICE CONTRACT

11 high iron content); and use a coarser blade for non-ferrous metals (those that do not have an iron content). Use a high speed setting for cutting soft metals (aluminum, copper, brass, mild steel, galvanized. pipe, conduit sheet metal, etc.). Use lower speed to cut plastics, tile, laminate, hard m...

Page 14 - 0 DAY NO SATISFACTION GUARANTEE; If you are dissatisfied with any D; FREE WARNING LABEL REPLACEMENT:; If your warning labels become illegible or; Patent Notification; Manufactured under one or more of the

12 30 DAY NO SATISFACTION GUARANTEE If you are dissatisfied with any D E WALT power tool, laser or nailer, for any reason, simply return it to the point of purchase with your sales receipt within 30 days for a replacement unit or a full refund. FREE WARNING LABEL REPLACEMENT: If your warning labels ...

Dewalt DC9000 XE - User Manual

Table of Contents:

Summary

Other Dewalt Models