Dewalt DC900-XE- User Manual

Page 3 - SAVE THESE INSTRUCTIONS; Definitions: Safety Guidelines

1 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D E WALT TOOL, CALL US AT: 1800 654 155 (Aust) or 09 526 2556 (NZ). GENERAL SAFETY INSTRUCTIONS WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term...

Page 5 - Important Safety Instructions for Battery Chargers

3 • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Wear ear protectors when hammering for extended periods of time. Prolonged exposure to high intensity noise can...

Page 6 - Introduction; READ ALL INSTRUCTIONS

4 • Do not operate charger with damaged cord or plug — have them replaced immediately. • Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service center. • Do not disassemble charger; take it to an authorized service cent...

Page 9 - KEY FEATURES AND FUNCTIONS; To select forward rotation,; Mode Control Collar

7 A B C D FIG. 1 KEY FEATURES AND FUNCTIONS Variable Speed Switch (Fig. 1) To turn the tool on, squeeze the trigger switch (A). To turn the tool off, release the trigger switch. Your tool is equipped with a brake. The chuck will stop as soon as the trigger switch is fully released. NOTE: Continuous ...

Page 10 - Self-Tightening Chuck Operation; TO INSERT A DRILL BIT OR OTHER

8 SCREWDRIVING (FIG. 2) 1. Select the desired speed/torque range using the three-speed gear shifter (E) on the top of tool to match the speed and torque to the planned application. To set the torque level to the proper setting on the clutch collar, initially set the clutch collar at a lower setting ...

Page 12 - CHARGER CLEANING INSTRUCTIONS; ACCESSORIES; FREE ONE YEAR SERVICE CONTRACT

10 2. Drill straight, keeping the bit at a right angle to the work. Do not exer t side pres- sure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed. 3. When drilling deep holes, if the hammer speed star ts to drop off, pull the bit par- tially out of ...

Page 13 - 0 DAY NO SATISFACTION GUARANTEE; If you are dissatisfied with any D; FREE WARNING LABEL REPLACEMENT:; If your warning labels become illegible or; Patent Notification; Manufactured under one or more of

11 30 DAY NO SATISFACTION GUARANTEE If you are dissatisfied with any D E WALT power tool, laser or nailer, for any reason, simply return it to the point of purchase with your sales receipt within 30 days for a replacement unit or a full refund. FREE WARNING LABEL REPLACEMENT: If your warning labels ...

Dewalt DC900-XE- User Manual

Table of Contents:

Summary

Other Dewalt Models