Dewalt DC629-XE- User Manual
Dewalt DC629-XE– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Definitions: Safety Guidelines
- Page 3 – SAVE THESE INSTRUCTIONS; Important Safety Instructions for Nailers; contact trip lock-off
- Page 4 – READ ALL INSTRUCTIONS
- Page 5 – Rechargeable Battery Recycling
- Page 7 – ACTION; Permits smooth operation of magazine, reduces wear, and; HOW; The use of oils, lubricants periodically or solvents is not; Preparing the Tool
- Page 8 – DRIVER/RETURN ASSEMBLY; RETURN CORD ASSEMBLY; TO REASSEMBLE NAILER; Before each use, check to insure all screws, nuts and fasteners; WHY; Prevents jams and premature failure of tool parts.; Tighten loose screws or other fasteners using the appropriate; Cleaning; CHARGER CLEANING INSTRUCTIONS; Repairs; Troubleshooting Guide; Accessories
- Page 10 – TROUBLESHOOTING GUIDE; WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, ALWAYS; DISCONNECT BATTERY PACK FROM TOOL; BEFORE ALL REPAIRS; SYMPTOM CAUSE
- Page 12 – WALT Battery and Charger Systems; Battery; All charge times are approximate. Actual charge time may vary.
DC628-XE
DC629-XE
(Sequential Fire Action only)
15 GAUGE CORDLESS NAILER
INSTRUCTION MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Angled 34 ˚ J G L E D A F A. Trigger B. Contact trip lock-off C. Depth adjustment wheel D. Headlights/Low battery indicator E. Jam clearing latch F. Contact trip G. Magazine H. Pusher I. Reversible suspension hook J. No-mar pad K. No-mar tip storage Angled Nail 32 mm, 38 mm, 51 mm, 65 mm Lengths (...
2 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D E WALT TOOL, CALL US AT: 1800 654 155 (Aust) or 09 09 259 1111 (NZ). Safety instructions for Power Tools When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and...
3 careful not to lose footing when working in elevated environments such as rooftops. • Do not drive fasteners near edge of material. The workpiece may split causing the fastener to ricochet, injuring you or a co-worker. Be aware that the nail may follow the grain of the wood (shiner), causing it to...
