Dewalt DC608-XE- User Manual

Page 4 - SAVE THESE INSTRUCTIONS; Definitions: Safety Guidelines

2 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D E WALT TOOL, CALL US AT: 1800 654 155 (AUS) or 09 259 1111 (NZ). SAFETY INSTRUCTIONS FOR POWER TOOLS When using power tools, always observe the safety regulations applicable in your country to reduce the risk of fire, electric shock and per...

Page 6 - contact trip lock-off

4 FIG. E the employer’s responsibility to enforce the use of eye protection equipment by the tool operator and other people in the work area. (Fig. A) • Always wear appropriate personal hearing and other protection during use. Under some conditions and duration of use, noise from this product may co...

Page 8 - Important Safety Instructions for Battery Packs; READ ALL INSTRUCTIONS

6 • Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals. WA...

Page 9 - The RBRCTM Seal; Rechargeable Battery Recycling Corporation.; Important Safety Instructions for Battery Chargers

7 NOTE: Battery storage and carrying caps are provided for use whenever the battery is out of the tool or charger. Remove cap before placing battery in charger or tool. WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do no...

Page 10 - Using Automatic Tune-UpTM Mode; SAVE THESE INSTRUCTIONS FOR FUTURE USE; Chargers

8 MINIMUM GAUGE FOR CORD SETS For Cable length (m): 7.5 15 25 30 45 60 Use Cable with minimum rating (Amperes)Tool Amperes 0 - 3.4 7.5 7.5 7.5 7.5 7.5 7.5 3.5 - 5.0 7.5 7.5 7.5 7.5 10 15 5.1 - 7.0 10 10 10 10 15 15 7.1 - 12.0 15 15 15 15 20 20 12.1 - 20.0 20 20 20 20 25 – • Do not place any object o...

Page 11 - PROBLEM POWER LINE

9 before use. A battery pack may also slowly lose its charge if left in a charger that is not plugged into an appropriate AC source. WEAK BATTERY PACKS: Chargers can also detect a weak battery. Such batteries are still usable but should not be expected to perform as much work. In such cases, about 1...

Page 14 - WARNING: To reduce the risk of serious personal injury, DO NOT; Loading the Tool; WARNING: To reduce risk of serious injury

12 5. Check for smooth and proper operation of contact trip and pusher assemblies. Do not use tool if either assembly is not functioning properly. NEVER use a tool that has the contact trip restrained in the actuated position. 6. Keep tool pointed away from yourself and others. 7. Inser t fully char...

Page 15 - Cold Weather Operation

13 Headlights (Fig. 10) C D FIG. 10 There is a headlight (D) located on each side of the nailer. Headlights turn on upon battery insertion, activation of the trigger, or depressing the contact trip. NOTE: These headlights are for lighting the immediate work surface and are not intended to be used as...

Page 16 - TO REMOVE SUSPENSION HOOK; MAINTENANCE; from tool before cleaning and inspection.; Lubrication; Troubleshooting; ACCESSORIES

14 The D E WALT cordless nailers include an integrated suspension hook (I) and can be attached to either side of the tool to accommodate left- or right-handed users.If the hook is not desired at all, it can be removed from the tool. TO REMOVE SUSPENSION HOOK 1. Remove battery pack from tool. 2. To s...

Page 17 - FREE ONE YEAR SERVICE CONTRACT

15 Recommended accessories for use with your tool are available at extra cost from your local service center. If you need any assistance in locating any accessory, please contact D E WALT Industrial Tool Co., 20 Fletcher Road, Mooroolbark, VIC 3138 Australia or call 1800 654 155 or (NZ) 09 259 1111....

Page 18 - TROUBLESHOOTING GUIDE; SYMPTOM CAUSE

16 TROUBLESHOOTING GUIDE MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW. FOR MORE SERIOUS OR PERSISTENT PROBLEMS, CONTACT A D E WALT SERVICE CENTER OR CALL (AUS) 1800 654 155 OR (NZ) 09 259 1111. WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, ALWAYS DISCONNECT BATTER...

Page 20 - WALT

D E WALT Battery and Charger Systems Battery Output Chargers/Charge Time Nominal 240 Volts 12 Volts X Indicates that the battery pack is not compatible with that specific charger. All charge times are approximate. Actual charge time may vary. Read the instruction manual for more specific information...

Dewalt DC608-XE- User Manual

Table of Contents:

Summary

Other Dewalt Models