Dewalt D25941 XE - User Manual

Page 3 - SAVE THESE INSTRUCTIONS

1 Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury . WARNING: Indicate...

Page 5 - Safety Warnings for Impact demolition hammers

3 Safety Warnings for Impact demolition hammers • Wear ear protectors. Exposure to noise can cause hearing loss. • Use auxiliary handles supplied with the tool. Loss of control can cause personal injury. • Hold power tools by insulated gripping surfaces when performing an operation where the cutting...

Page 6 - INTENDED USE; Residual Risks

4 Active Vibration Control D25901, D25941 The active vibration control neutralizes rebound vibration from the hammer mechanism. Lowering hand and arm vibration, it allows more comfor table use for longer periods of time and extends the life of the unit. Electronic Impact Energy Control Dial D25901 O...

Page 7 - slightly until the sleeve snaps into position.; Inserting and Removing 19 mm Hex Accessories; Do not apply lubricant to the machine.

5 FIG. 3 D25901 E FIG. 2 D25901 2. Inser t the chisel shank into the tool holder/sleeve (E). Press and turn the chisel slightly until the sleeve snaps into position. 3. Pull on the chisel to check if it is properly locked. The hammering function requires the chisel to be able to move axially several...

Page 8 - Setting the Electronic Impact Energy Control Dial; Always operate the machine with the side handle properly mounted.; Instructions for Use; Be aware of the location of pipework and wiring.; MAINTENANCE; attachments or accessories.; Lubrication; Your power tool requires no additional lubrication.

6 Setting the Electronic Impact Energy Control Dial D25901 (FIG. 1) Turn the dial (C) to the desired level. The higher the number, the greater the impact energy. With dial settings from 1 (low) to 7 (full power) the tool is extremely versatile and adaptable for many different applications. The requi...

Page 9 - FREE ONE YEAR SERVICE CONTRACT

7 Cleaning WARNING: Blow dir t and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury, always wear ANSI Z87.1 approved eye protection when performing this. WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic par ts of...

Dewalt D25941 XE - User Manual

Table of Contents:

Summary

Other Dewalt Models