Dewalt D25113-XE- User Manual
Dewalt D25113-XE– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – SAVE THESE INSTRUCTIONS; Definitions: Safety Guidelines
- Page 6 – Switch; VARIABLE SPEED TRIGGER; Reversing Lever; INTENDED USE; Side Handle
- Page 7 – Mode Selector –; CHISEL ROTATION; OPERATION
- Page 9 – MAINTENANCE; MAXIMUM RECOMMENDED CAPACITIES; Guarantee
- Page 10 – SPECIFICATIONS
D25113-XE, D25114-XE, D25213-XE, D25314-XE, D25315-XE
HEAVY-DUTY SDS ROTARY HAMMERS
D25330-XE
HEAVY-DUTY SDS CHIPPING HAMMER
INSTRUCTION MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D E WALT TOOL, CALL US AT: 1800 654 155 (Aust) or 09 579 7600 (NZ). SAFETY INSTRUCTIONS FOR POWER TOOLS When using power tools, always observe the safety regulations applicable in your coun- try to reduce the risk of fire, electric shock and ...
4 Switch To star t the rotary hammer, depress the trigger switch (D). To stop rotary hammer, release the switch. VARIABLE SPEED TRIGGER The variable speed trigger switch (D) permits speed control. The far ther the trigger switch is depressed, the higher the speed of the drill. NOTE: Use lower speeds...
5 D25113-XE, D25114-XE To reverse the rotary hammer, turn it OFF and align the reversing lever (E) with the yellow arrow pointing backward (viewed when holding drill in operating position). To position the lever for forward operation, turn the rotary hammer OFF and align the reversing lever with the...
