Page 2 - C A U T I O N; RISK OF ELECTRIC SHOCK; TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE; Downloaded From TheatreSystem-Manual.com Manuals
2 ENGLISH C A U T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is int...
Page 3 - NOTE SULL’USO/NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA; CAUTION
3 ENGLISH • Avoid high temperatures. Allow for sufficient heat dispersion wheninstalled on a rack. • Vermeiden Sie hohe Temperaturen. Beachten Sie, daß eine ausreichendLuftzirkulation gewährleistet wird, wenn dasGerät auf ein Regal gestellt wird. • Eviter des températures élevées Tenir compte d’une ...
Page 4 - TABLE OF CONTENTS; We greatly appreciate your purchase of this unit.
4 ENGLISH 2 INTRODUCTION 2 ACCESSORIES Thank you for choosing the DENON DHT-M330DV HOME THEATER SYSTEM. This remarkable component has been engineered to provide superbsurround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your f...
Page 5 - ENGLISH; BEFORE USING; power cord and input/output connection cords.; • To ensure safety, do not place any objects on top or lean objects
5 ENGLISH 1 2 BEFORE USING CAUTIONS ON INSTALLATION Pay attention to the following before using this unit: • Moving the set To prevent short circuits or damaged wires in the connection cords,always unplug the power cord and disconnect the connection cordsbetween all other audio components when movin...
Page 6 - FEATURES; II; II; CAUTIONS ON HANDLING; magnetic force nearby.
6 ENGLISH 4 FEATURES 1. Dolby Digital Using advanced digital processing algorithms, Dolby Digitalprovides up to 5.1 channels of wide-range, high fidelity surroundsound. Dolby Digital is the default digital audio delivery system forDVD. 2. DTS (Digital Theater Systems)and DTS NEO:6 DTS provides up to...
Page 7 - CONNECTIONS; FL; CENTER SPEAKER
Gray Blue Red White 7 ENGLISH (1) Speaker system connections 5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely. Incomplete connections will re...
Page 8 - Connecting the speaker cords
q Press the terminal’s lever down. w Insert the cord’s core wires into the hole. e Release the lever. FL FR C SW SL SR (3m) (3m) (3m) (10m) (3m) (10m) + – + – + – + – + – + – Blue Gray White Red 8 ENGLISH Be sure to turn the amplifier’s power off when connecting the speaker systems. • Use the includ...
Page 9 - Protector circuit; Replacing the speaker connection cords
9 ENGLISH • The AV surround amplifier (AVC-M330) is equipped with a built-in protection circuit. The purpose of this circuit is to cut off the output to the speakers in order to protect them under circumstances such as when the output of the amplifier is inadvertently short-circuited and a largecurr...
Page 10 - VIDEO IN
10 ENGLISH (2) Connecting the DVD Player and TV • Connect the DVD player’s video signals directly to the TV and switch the picture on the TV.• When making connections, also refer to the operating instructions of the other components. IN VIDEO IN S-VIDEO IN Connecting the DIGITAL Jack • Use a commerc...
Page 12 - AM loop antenna assembly; Connection of AM antennas
12 ENGLISH 1 4 2 3 (4) Connecting the antenna terminals DIRECTION OF BROADCASTING STATION 75 Ω /ohms COAXIAL CABLE FM ANTENNA FM INDOOR ANTENNA(Supplied) AM LOOP ANTENNA(Supplied) AM OUTDOORANTENNA GROUND AM loop antenna assembly Connect to the AMantenna terminals. Remove the vinyl tieand take out t...
Page 14 - two DVD player are connected using system connections.
14 ENGLISH (7) Connecting the audio components (DVD-M330) • The AVR-M330 can be used connected in a system with the DVD-M330 DVD player.• For instructions on operating the DVD-M330 DVD player, refer to their respective operating instructions.• Only the DVD-M330 DVD player can be connected directly t...
Page 15 - PART NAMES AND FUNCTIONS; e r t; Select button (SELECT
15 ENGLISH 6 PART NAMES AND FUNCTIONS AV SURROUND RECEIVER (AVR-M330) Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). w q e r t y u i o !0 !0 !1 !1 q Power operation switch (ON/STANDBY)..................................(29) w Remote control sen...
Page 18 - (Operated with mode switch 2 set to “DVD”)
18 ENGLISH 3 Operate the DHT-M330DV. [1] Surround amplifier system buttons (Operated with mode switch 2 set to “AMP.”) • These operations are possible with mode switch 1 at any position. SLEEP : Sleep on/off DVD : Function DVD TUNER : Function TUNER TV/AUX1 : Function TV/AUX1 TAPE : Function TAPE AU...
Page 19 - REMOTE CONTROL UNIT; Notes on Batteries
19 ENGLISH 7 REMOTE CONTROL UNIT • The included remote control unit (RC-996) can be used to operate not only this unit but other remote control compatible DENON components as well. In addition, the memory contains the control signals for other remote control units, so it can be used to operate non-D...
Page 20 - • The included remote control unit (RC-996) can be used to operate
20 ENGLISH • The included remote control unit (RC-996) can be used to operate not only the DHT-M330DV but also and to operate other remotecontrol compatible DENON products. In addition, the remotecontrol operation codes of other major brands of TVs and videodecks are also stored in the remote contro...
Page 22 - Combinations of preset codes for different brands; TV
22 ENGLISH Combinations of preset codes for different brands Fujitsu 004, 062 Funai 004, 062 Futuretech 004 GE 020, 036, 037, 040, 044, 058, 066, 088, 119, 120, 125, 147 Goldstar 015, 029, 031, 039, 048, 051, 056, 057, 067, 068, 069, 116, 165 Grundy 062 Hitachi 029, 031, 051, 052, 070, 111, 112, 113...
Page 24 - VCR
24 ENGLISH VCR Admiral 081 Aiko 095 Aiwa 009 Akai 026, 027, 070, 072, 082, 083, 084 Alba 055 Amstrad 009 ASA 042 Asha 087 Audio Dynamic 005, 085 Audiovox 088 Beaumark 087 Broksonic 086, 093 Calix 088 Candle 006, 087, 088, 089, 090 Canon 049, 057 Capehart 025, 055, 056, 071 Carver 015 CCE 095 Citizen...
Page 27 - Quick Setup procedure; SPEAKER SETUP; SETTING UP THE SYSTEM
<TAPE> <MD> Use as analoginput/output connectorMD function. Use analog input/outputconnectors (TAPE) anddigital input connector(TV/AUX1) as theTV/AUX1 function. 27 ENGLISH (1) Quick setup procedure • Generally used system settings have already been made on the DHT-M330DV upon shipment fr...
Page 29 - Achieving the optimum surround sound; OPERATING THE SURROUND FUNCTIONS
29 ENGLISH 4 Play the DVD. The display changes as shown below,depending on the type of disc. Example: When playing a pre-recorded ( ) disc. G D I I T D L A D V D T S D D V Example: When playing a pre-recorded ( ) disc A U T O S T D D V Example: When playing a pre-recorded ( ) disc 5 Adjust the volum...
Page 30 - DVD; AUTO; Input mode selection function
30 ENGLISH 1 5 3 5 2 3 1 (2) Input mode setting 1 Press the FUNCTION button to select the input function to beplayed. • The function switches as shown below.• The function only changes in the “ Æ ” direction when operated from the remote control unit. • Factory default (TAPE) = TAPE DVD TUNER TV/AUX...
Page 31 - Input mode display; Input signal display; To check the currently playing program source, etc.; and
31 ENGLISH 4 Start playback on the selected component.• For operating instructions, refer to the component’s manual. • The volume can be adjusted within the range 0 to 60. Note that depending on the input signal, surround mode, speakersettings and channel level setting, it may not be possible toadju...
Page 32 - SDB ON; ENHANCER OFF
32 ENGLISH 1 1 1 (3) After starting playback [1] Adjusting the sound quality (SDB/P.EQ) The SDB/P.EQ function will not work in the direct mode. [3] Turning the sound off temporarily (MUTING) 1 Press the SDB/P.EQ button.• The tone switches as follows each time the SDB/P.EQ button is pressed. DEFEAT• ...
Page 33 - 0 SURROUND PLAYBACK; E V E
33 ENGLISH (1) Before playing with the surround function • Adjustments using the test tones can only be performed in the “Auto” mode and are only valid for the AUTO DECODE Surroundmodes. The adjusted levels are automatically stored in the memory. 10 SURROUND PLAYBACK • Even after adjusting using the...
Page 35 - T O; AUTO ST
35 ENGLISH [2] 2-channel mode settings • In the AUTO DECODE mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround mode or play in the stereo 2-channel mode (AUTO STEREO mode: factory default setting). For 2-channel input signals, one of four play m...
Page 36 - GAME; CINEMA (Dolby Pro Logic; (3) Playing in the Dolby Virtual Speaker mode
36 ENGLISH Surround parameters (1) (2-channel mode) AUTO-ST (auto stereo) mode 2-channel sources are played in 2-channel stereo.When this mode is selected in the auto decode mode, multi-channel sources (DVD, BS digital, etc.) are played in the multi-channel mode,while 2-channel sources (CDs, etc.) a...
Page 37 - Personal Memory Plus
37 ENGLISH 4 Select and set the surroundparameters. (On the remote control unit, use the , cursor buttons to set the parameters.) If nothing is done for 4 secondsfrom when the parameter isdisplayed, the normal displayreappears. Main unit B Setting the DOLBY VS mode 2SP Ref. 2SP Wide The mode is not ...
Page 38 - BYPASS; C I; DOLBY H; MUSIC
38 ENGLISH (5) Playback using the Dolby Headphone mode • The AVR-M330 is equipped with the Dolby Headphone mode, a technology developed jointly by Dolby Laboratories and Lake Technology for achieving 3D sound over regular headphones. • The Dolby Headphone mode is set when headphones are connected to...
Page 39 - CENTER
39 ENGLISH (6) Setting the speaker distance • Input the distances from the listening position to the speakers and set the surround delay time.• The default settings below are set upon shipment from the factory. Preparations: Measure the distances from the listening position to the speakers (L1 to L3...
Page 42 - LISTENING TO THE RADIO; Auto tuning
42 ENGLISH 11 LISTENING TO THE RADIO 1 Select the FUNCTION “TUNER”. 2 Select “FM” or “AM”.• The selected “FM AUTO”, “FM MONO” or “AM” is displayed. • When using the remote control, the mode button is used to select FM AUTO and MONO. 3 Adjust the receiving frequency. • When a station is received, the...
Page 43 - Preset stations using the including remote control unit.; using the manual “Preset memory” operation.
43 ENGLISH (2) Presetting stations (remote control unit only) 2 A total of 40 stations (including both FM and AM stations) can be preset. 2 Preset stations using the including remote control unit. 1 Tune in the station you want to preset. P F - - M 5 2 9 . M 0 2, 3 3 2 Press the MEMO button. Remote ...
Page 45 - Set the band to “FM”.
45 ENGLISH (6) RDS search Use this function to automatically tune to FM stations that provide RDS service. 1 Set the band to “FM”. 2 Press the RDS button until “RDS”appears on the display. Remote control unit Remote control unit 3 Press the TUNING + (UP) or – (DOWN)button to automatically begin the ...
Page 47 - Subwoofer
47 ENGLISH 12 EXPANDING TO A 6.1- OR 7.1-CHANNEL SYSTEM • The DHT-M330DV is equipped with a decoder function allowing 6.1- or 7.1-channel playback (Dolby Digital EX, DTS-ES, Dolby Pro-Logic IIx, etc.), as well as PRE OUT connectors for surround back channels (SBL and SBR). • The DHT-M330DV is also e...
Page 48 - Changing the Quick Setup settings
48 ENGLISH (3) 6.1- or 7.1-channel surround playback z Changing the Quick Setup settings At “SPEAKER SETUP” under “Quick Setup procedure” (page 27), select the configuration to be used, “6.1CH” or “7.1CH”. x Checking and adjusting the playback level using test tones Before playing, use test tones to...
Page 49 - Surround; Dolby Surround; Dolby Pro Logic
49 ENGLISH Surround The AVR-M330 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the samesense of presence as in a movie theater. Dolby Surround (1) Dolby Digital Dolby Digital is the multi-channel digital signal format develope...
Page 50 - DTS Digital Surround; DTS compatible media and playback methods
50 ENGLISH DTS Digital Surround Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems.DTS offers the same “5.1” playback channels as Dolby Digital (front left, front right and center, surround left and surround right) as well ...
Page 51 - DTS-ES Extended Surround; surround
51 ENGLISH DTS-ES Extended Surround TM DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibilitywith the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround...
Page 52 - Features of Dolby Virtual Speaker sound; Dolby Headphone; : Virtual sound field created with the Dolby
52 ENGLISH Dolby Virtual Speaker Dolby Virtual Speaker technology uses proprietary technology of Dolby Laboratories to create a virtual surround sound field using only twospeakers for the front channels, allowing the user to experience sound as if surround speakers were actually being used. 2 Featur...
Page 53 - USING THE SLEEP TIMER
53 ENGLISH • The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes. (Sleep timer)• Use this function to automatically switch the power to the standby mode after a specific amount of time (minutes). Example: To set the power to the standby m...
Page 54 - SYSTEM FUNCTIONS
54 ENGLISH 2 Making system connections between the AVR-M330 and the DVD player (DVD-M330) makes operation even easier. (For instructions on connections, refer to “Connecting the audio components” on pages 14.) 2 System functions will not work properly if the input/output function settings are not ri...
Page 55 - ENGLI; LAST FUNCTION MEMORY; settings are reset to the factory default values.
55 ENGLI 16 LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off.This function eliminates the need to perform complicated resettings when the power is switched on. • The...
Page 56 - Are all the connections correct ?; TROUBLESHOOTING; uner
56 ENGLISH Check again before assuming the player is malfunctioning 2 Are all the connections correct ? 2 Are you following the instructions in the manual ? 2 Are the speakers and other components operating properly ? If this unit does not seem to be functioning properly, check the table below. If t...
Page 57 - SPECIFICATIONS
57 ENGLI 19 SPECIFICATIONS 2 Audio Section • Power Amplifier Section Rated output: Front: 17 W + 17 W (6 Ω /ohm load, 1 kHz, T.H.D. 10 %) Center: 20 W (6 Ω /ohm load, 1 kHz, T.H.D. 10 %) Surround: 17 W + 17 W (6 Ω /ohm load, 1 kHz, T.H.D. 10 %) Subwoofer: 20 W (6 Ω /ohm load, 1 kHz, T.H.D. 10 %) Out...
Page 58 - MEMO
382 MEMO Downloaded From TheatreSystem-Manual.com Manuals
