Page 3 - Settings; Connections
Listening to music on a Bluetooth device 35 Playing music from Bluetooth device 36 Pairing with other Bluetooth devices 37 Reconnecting to this unit from a Bluetooth device 38 Turning the Bluetooth function off for high sound performance playback 38 Listening to DIGITAL IN 39 Listening to ANALOG IN ...
Page 4 - Appendix
Tips Tips 52 Troubleshooting 53 Resetting factory settings 61 Appendix Playing back DATA CDs 62 DIGITAL IN 63 Playing back Bluetooth devices 63 About Discs 64 Last function memory 66 Explanation of terms 67 Trademark information 69 Specifications 70 Index 74 Contents Connections Playback Settings Ti...
Page 5 - Accessories; Front panel
Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product. . Remote control ...
Page 6 - Inserting the batteries; Remove the rear lid in the direction of the arrow and; Put the rear cover back on.; Operating range of the remote control
Inserting the batteries 1 Remove the rear lid in the direction of the arrow and remove it. . 2 Insert two batteries correctly into the battery compartment as indicated. . Batteries 3 Put the rear cover back on. NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together...
Page 7 - Features
Features 0 High quality amplifier stressing sound quality Equipped with a 30 W + 30 W (6 Ω/ohms) high-quality amplifier circuits. 0 Weight and Dramatic sound The board and circuit configuration has been redesigned to achieve lower impedance. Since stable current is supplied to the power amp and othe...
Page 8 - Part names and functions
Part names and functions Front panel . u i Q0 o Q1 Q2 Q3 q w e r t y For details, see the next page. Contents Connections Playback Settings Tips Appendix 8 Front panel Display Rear panel Remote Index
Page 11 - Display
Display . u i y t r e w q A Playback mode indicators 1 : Lights up during playback. 3 : Lights up during pause. B Tone indicatorsSDB : Lights up when the super dynamic bass function is set to “ON”. TONE : Lights up when the tone (BASS/TREBLE) is being adjusted. C Tuner reception mode indicators Thes...
Page 12 - Rear panel
Rear panel . R L 1 2 OPTICAL DIGITAL IN AC IN R L ANALOG IN SUB WOOFER OUT SPEAKERS t y q w e r For details, see the next page. Contents Connections Playback Settings Tips Appendix 12 Front panel Display Rear panel Remote Index
Page 14 - Remote control unit
Remote control unit r e w q t y A POWER button ( X ) This turns the power on/standby. ( v p. 25) B DIMMER button Adjust the display brightness of this unit. ( v p. 44) C CLOCK button The current time appear on the unit. ( v p. 43) D SLEEP button This sets the sleep timer. ( v p. 43) E Input source s...
Page 17 - Cables used for connections; Contents
o Contents Speaker connection 18 Connecting an analog device 20 Connecting a digital device 20 Connecting an FM/AM antenna 21 Connecting the power cord 23 NOTE 0 Do not plug in the power cord until all connections have been completed. 0 Do not bundle power cords with connection cables. Doing so can ...
Page 18 - Speaker connection; Connecting the speaker cables; tip of the speaker cable, then twist the core wire tightly.
Speaker connection Here we connect the speakers in the room to this unit.This section explains how to connect them using typical examples. NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer. 0 Connect so that the speaker cable ...
Page 19 - Connecting the subwoofer; Subwoofer; Connecting speakers; Speaker
Connecting the subwoofer Use a subwoofer cable to connect the subwoofer. . R L 1 2 OPTICAL DIGITAL IN R L ANALOG IN SUB WOOFER OUT SPEAKERS Subwoofer Connecting speakers . R L 1 2 OPTICAL DIGITAL IN ANALOG IN SUB WOOFER OUT R L SPEAKERS (R) (L) w q w q Speaker (SC-M41, sold separately) Contents Conn...
Page 20 - Connecting an analog device; Analog; Connecting a digital device; Digital; Specifications of supported audio formats
Connecting an analog device You can connect this unit to various devices with analog audio output. . 1 2 OPTICAL DIGITAL IN AC IN R L SUB WOOFER OUT SPEAKERS R L ANALOG IN AUDIO L R OUT L R L R AUDIO Analog device Connecting a digital device You can connect this unit to devices with digital audio ou...
Page 21 - Connecting an FM/AM antenna
Connecting an FM/AM antenna After connecting the antenna and receiving a broadcast signal, fix the antenna with tape in a position where the noise level becomes minimal. “Listening to FM/AM broadcasts” ( v p. 31) . 1 2 OPTICAL DIGITAL IN AC IN R L SUB WOOFER OUT SPEAKERS R L ANALOG IN w e q AM loop ...
Page 22 - Using the AM loop antenna; AM loop antenna assembly; Put the stand section through the bottom of the loop; Projecting part
o Using the AM loop antenna Suspending on a wall Suspend directly on a wall without assembling. . Nail, tack, etc. Standing alone Use the procedure shown above to assemble.When assembling, refer to “AM loop antenna assembly”. . o AM loop antenna assembly 1 Put the stand section through the bottom of...
Page 23 - Connecting the power cord; Power cord
Connecting the power cord After completing all the connections, insert the power plug into the power outlet. . 75 1 2 OPTICAL DIGITAL IN L R EAKERS AC IN Power cord (supplied) To household power outlet(AC 120 V, 60 Hz) Contents Connections Playback Settings Tips Appendix 23 Front panel Display Rear ...
Page 24 - Basic operation
o Contents Basic operation Turning the power on 25 Switching the power to standby 25 Selecting the input source 26 Adjusting the volume 26 Turning off the sound temporarily (Muting) 26 Playback a device Playing CDs 27 Playing DATA CDs 29 Listening to FM/AM broadcasts 31 Listening to music on a Bluet...
Page 25 - Input source; POWER; MUTE; Turning the power on; Switching the power to standby; Press POWER
Basic operation . Input source select buttons POWER X VOLUME df MUTE Turning the power on 1 Press POWER X to turn on power to the unit. The power indicator lights green. 0 You can also press X on the main unit to turn on power from standby mode. Switching the power to standby 1 Press POWER X . The u...
Page 26 - Selecting the input source; Press the input source select button to be played back.; Adjusting the volume; Use VOLUME; to adjust the volume.; Turning off the sound temporarily; Press MUTE
Selecting the input source 1 Press the input source select button to be played back. The desired input source can be selected directly. 0 You can also select the input source by pressing q on the main unit. 0 Press TUNER again while the source is set to “TUNER” to switch between FM/AM band. Adjustin...
Page 27 - INFO; RANDOM; Playing CDs; Press CD to switch the input source to “DISC”.
Playing CDs . INFO 0 – 9, +10 CLEAR PROGRAM 2 1 / 3 6 7 8 9 RANDOM CD REPEAT Playing CDs 1 Press CD to switch the input source to “DISC”. 2 Insert a disc. ( v p. 64) Playback starts. 0 Press 5 on the main unit to open/close the disc tray. 0 You can set whether to automatically play CDs. ( v p. 50) N...
Page 28 - Playing tracks in a specific order; Use 0 – 9 and +10 to select the tracks you want to
Operation buttons Function 1 / 3 Playback / Pause 2 Stop 8 9 Skip to previous track / Skip to next track 6 7 (Press and hold) Fast-reverse / Fast-forward 0 – 9, +10 Select the track RANDOM Random playback REPEAT Repeat playback 0 Switching between Single-track repeat and All-track repeat. INFO Switc...
Page 29 - Playing DATA CDs; uio; ENTER
Playing DATA CDs . uio p ENTER INFO 0 – 9, +10 2 1 / 3 6 7 8 9 CD FOLDER/ALL RANDOM REPEAT 0 This section explains how to playback music files that are recorded onto a CD-R or CD-RW. 0 There are many music distribution sites on the Internet allowing you todownload music files in MP3 or WMA (Windows ...
Page 30 - Playing files; Files that can be played back
Playing files 1 Press CD to switch the input source to “DISC”. 2 Load a CD-R or CD-RW containing music files into the disc tray. ( v p. 64) Playback starts. 0 Press 5 on the main unit to open/close the disc tray. 0 You can set whether to automatically play CDs. ( v p. 50) Operation buttons Function ...
Page 31 - TUNER; Listening to FM/AM broadcasts; Press TUNER to select the reception band.
Listening to FM/AM broadcasts . TUNER TUNE +, – CHANNEL +, – 2 SETUP uio p ENTER 0 – 9, +10 CLEAR MODE For details about how to connect the antenna, see “Connecting an FM/AM antenna” ( v p. 21). Listening to FM/AM broadcasts 1 Press TUNER to select the reception band. FM AUTO: When listening to an F...
Page 32 - Automatically presetting FM stations; ui
2 Use TUNE + or TUNE – to select the station you want listen to. When a station is received, the “TUNED” indication will light. 0 When “FM AUTO” is selected: Automatically search for and tune to a receivable radio station. 0 When “FM MONO” is selected: Manually change the frequency one step at a tim...
Page 33 - Giving station names to preset channels; Tune in the preset channel you want to name.; Presetting FM/AM stations manually; Tune in the station you want to preset.; Input the station name.
o Giving station names to preset channels 1 Tune in the preset channel you want to name. 2 Press ENTER twice. The display switches to the station name input display. 3 Input the station name. Names of up to 8 characters can be input. ui : Selects the character. o p : Moves the cursor to the left or ...
Page 35 - Listening to music on a Bluetooth device; Bluetooth
Listening to music on a Bluetooth device . Bluetooth 2 1 / 3 6 7 8 9 Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device.Communication is possible up to a range of about 32....
Page 36 - Playing music from Bluetooth device; Press Bluetooth to switch the input source to
Playing music from Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit.Once the Bluetooth device has been paired, it does not need to be paired again. 1 Press Bluetooth to switch the input source to “Bluetooth”. When...
Page 37 - Pairing with other Bluetooth devices; Activate the Bluetooth settings on your mobile device.
Operation buttons Function 1 / 3 Playback / Pause 2 Stop 8 9 Skip to previous track / Skip to next track 6 7 (Press and hold) Fast-reverse / Fast- forward NOTE 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth device needs to support the AVRCP profile. 0 The remot...
Page 39 - Listening to DIGITAL IN; Prepare for playback.; Press OPTICAL IN1 or OPTICAL IN2 to switch the input
. OPTICAL IN1 OPTICAL IN2 ANALOG IN Listening to DIGITAL IN 1 Prepare for playback. Check the connection “Connecting a digital device” ( v p. 20), then turn on this units. 2 Press OPTICAL IN1 or OPTICAL IN2 to switch the input source to “OPTICAL IN 1” or “OPTICAL IN 2”. 3 Play the component connecte...
Page 40 - Listening to ANALOG IN; Press ANALOG IN to switch the input source to
Listening to ANALOG IN 1 Prepare for playback. Check the connection, then turn on this units. 2 Press ANALOG IN to switch the input source to “ANALOG IN”. 3 Play the component connected to this unit. Contents Connections Playback Settings Tips Appendix 40 Front panel Display Rear panel Remote Index
Page 41 - Convenience functions; DIMMER
Convenience functions . DIMMER SLEEP CLOCK SDB/ TONE o p Adjusting the tone 42 Sleep timer function 43 Checking the current time 43 Switching the display’s brightness 44 Contents Connections Playback Settings Tips Appendix 41 Front panel Display Rear panel Remote Index
Page 42 - Press SDB/TONE to select the tone parameter to be; BASS
Adjusting the tone 1 Press SDB/TONE to select the tone parameter to be adjusted. 2 Use o p to adjust the “SDB”, “BASS”, “TREBLE”, “BALANCE” or “S.DIRECT”. n SDB (Super Dynamic Bass) ON: Emphasizes the bass sound (maximum +8 dB). OFF (Default) : Disable SDB (Super Dynamic Bass) function. n BASS Adjus...
Page 43 - Sleep timer function; Press SLEEP during playback and select the setting; To cancel the sleep timer; Checking the current time; Checking the current time when the power is
Sleep timer function You can have the power automatically switched to standby once a set time has elapsed. This is convenient for listening while going to sleep. 1 Press SLEEP during playback and select the setting time. 0 The “SLEEP” indicator on the display lights. 0 You can set the sleep timer in...
Page 44 - Switching the display’s brightness
Switching the display’s brightness The brightness of the display can be adjusted to one of four levels. 1 Press DIMMER. 0 The brightness of the display switches each time the button is pressed. 0 If the buttons are operated when the display is turned off, information is displayed temporarily at a lo...
Page 46 - Menu operation; Use; to select the menu to be set or operated, then; to change to desired setting.
. POWER CLOCK X SETUP uio p ENTER Menu operation 1 Press SETUP. The menu is displayed on the display. 2 Use ui to select the menu to be set or operated, then press ENTER. 3 Use uio p to change to desired setting. 4 Press ENTER to enter the setting. 0 To return to the previous item, press o . 0 Exiti...
Page 47 - CLOCK SETUP; Checking the current time when the power is on; ALARM SETUP
CLOCK SETUP Sets the current time. 1 Use ui to set the “hours”. 2 Press ENTER. The “minutes” display flashes. 3 Use ui to set the “minutes”. 4 Press ENTER. The current time is set, and the menu display disappears. n Checking the current time when the power is on Press CLOCK.Press once more and the d...
Page 49 - SPK OPTIMISE; AUTO STANDBY
H/P AMP GAIN Set the gain of the headphone amplifier. Set this according to the impedance of the connected headphones. It is recommended that this is set on the “LOW” side if the headphones have low impedance and on the “HIGH” side if they have high impedance. HIGH: Set the gain of the headphone amp...
Page 50 - CD AUTO PLAY; CLOCK MODE
CD AUTO PLAY When the CD tray is closed, the unit can detect the DISC, automatically switch the input source to DISC and start playback of the disc. ON (Default) : Performs automatic playback. OFF: Does not perform automatic playback. CLOCK MODE The clock is constantly displayed. ON: Display the clo...
Page 53 - Troubleshooting; Power does not turn on / Power is turned off
Troubleshooting If a problem should arise, first check the following. 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below.Should...
Page 54 - LED is flashing
o LED is flashing Symptom Cause / Solution Page Flashing red. (Flashes at 0.25 second intervals) 0 The amplifier circuit in the unit has malfunctioned. Disconnect the power and contact the repair center. － Flashing red. (Flashes at 0.5 second intervals) 0 Protection circuit activated due to a rise i...
Page 55 - Operations cannot be performed through the remote control unit; Display on this unit shows nothing
o Operations cannot be performed through the remote control unit Symptom Cause / Solution Page Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. 6 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit...
Page 56 - No sound comes out
o No sound comes out Symptom Cause / Solution Page No sound comes out of speakers. 0 Check the connections for all devices. 17 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Check that spe...
Page 57 - Desired sound does not come out; Audio from digital devices cannot be played back (Optical)
o Desired sound does not come out Symptom Cause / Solution Page Left/right volume balance is unbalanced. 0 Press the SDB/TONE button on the remote control to adjust the balance. 42 No sound from the sub woofer. 0 Check the subwoofer connections. 19 0 Switch the subwoofer power on. － Set values are n...
Page 58 - Sound is interrupted or noise occurs
o Sound is interrupted or noise occurs Symptom Cause / Solution Page When making a call on iPhone, noise occurs in audio output on this unit. 0 When making a call, keep a distance of 0.7 ft/20 cm or longer between iPhone and this unit. － Noise often occurs in FM/AM broadcasting. 0 Change the antenna...
Page 59 - Cannot playback Discs
o Cannot playback Discs Symptom Cause / Solution Page Cannot playback when the 1 / 3 button is pressed, or cannot correctly play back a specific part of the disc. 0 The disc is dirty or scratched. Either clean the disc, or insert a different disc. 64 Cannot playback CD- R/CD-RW. 0 CDs cannot be play...
Page 60 - Bluetooth cannot be played back
o Bluetooth cannot be played back Symptom Cause / Solution Page Bluetooth devices cannot be connected to this unit. 0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the Bluetooth device to enable the Bluetooth function. － 0 Bring the Bluetooth device n...
Page 61 - Resetting factory settings; Place this unit in Standby mode using
Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed.Various settings are reset to the factory default values. Make settings again. . 1 Place this unit in Standby mode using X . 2 While pressing and holding q , press and hold X for 3 secon...
Page 62 - Playing back DATA CDs; DATA CDs formats; Playable files
Playing back DATA CDs o DATA CDs formats CD-R and CD-RW discs created in the format described below can be played. Writing software format ISO9660 level 1 When written in other formats, it may not be possible to play the disc properly. Maximum number of playable files and folders Total number of fol...
Page 63 - DIGITAL IN; Playing back Bluetooth devices; About Bluetooth communications
DIGITAL IN o Specifications of supported audio formats n Optical Sampling frequency Bit length Linear PCM (2-channel) 32/44.1/48/88.2/96/ 176.4/192 kHz 16/24 bits Playing back Bluetooth devices This unit supports the following Bluetooth profiles. 0 A2DP (Advanced Audio Distribution Profile) : When a...
Page 64 - About Discs; Discs playable on this unit; Loading discs
About Discs o Discs playable on this unit A Music CDs Discs marked with the logo below can be played in this unit. r B CD-R/CD-RW NOTE 0 Discs in special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played. Do not attempt to play them, as doing so can damage the unit. 0 Some discs an...
Page 66 - Last function memory
Last function memory This stores the settings as they were immediately before going into the standby mode. When the power is turned back on, the settings are restored to as they were immediately before going into the standby mode. Contents Connections Playback Settings Tips Appendix 66 Front panel D...
Page 67 - Explanation of terms; Audio
Explanation of terms o Audio MP3 (MPEG Audio Layer-3) This is an internationally standardized audio data compression scheme, using the “MPEG-1” video compression standard. It compresses the data volume to about one eleventh its original size while maintaining sound quality equivalent to a music CD. ...
Page 68 - Others
o Others Finalizing Finalization is the process that makes recorded CD-R/CD-RW discs playable on compatible players. Pairing Pairing (registration) is an operation that is required in order to connect a Bluetooth device to this unit using Bluetooth. When paired, the devices authenticate each other a...
Page 69 - Trademark information
Trademark information . The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. . Adobe, the Adobe logo and Reader are either...
Page 70 - Specifications; Audio section; Tuner section
Specifications o Audio section 0 CD player Playable frequency response: 2 Hz - 20 kHz Wow & flutter: Below measurable limits (± 0.001 %) Sampling frequency: 44.1 kHz 0 Audio amplifier Rated output: 2-channel 30 W + 30 W (6 Ω/ohms, 1 kHz, T.H.D. 10 %) o Tuner section [FM] [AM] Receiving Range: 87...
Page 71 - Bluetooth section
o Bluetooth section Communications system: Bluetooth Version 4.0 Transmission power: Power Class 1 Maximum communication range: Approx. 10 m in line of sight z Frequency band: 2.4 GHz band Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distributi...
Page 72 - General
o Clock/Alarm/Sleep Clock type: Crystal oscillator (Within 1 – 2 minutes per month) Alarm: Once alarm/Everyday alarm: One system each Sleep: Sleep timer: Max. 90 minutes o General Power supply: AC 120 V, 60 Hz Power consumption: 70 W Power consumption in clock mode : 14 W Power consumption in standb...
Page 73 - Dimensions
o Dimensions Unit : mm . 6 (152) 8 3/8 (210) 4 1/4 (107) 4 5/8 (115) 1 1/4 (29) 1 1/4 (29) 1 1/4 (30) 7 7/8 (199) 1 1/8 (28) 1 7/8 (45) 10 3/4 (272) 1 (25) 1/2 (12) 5 1/8 (130) 4 17/8 (123) o Weight : 9 lbs 4 oz (4.2 kg) Contents Connections Playback Settings Tips Appendix 73 Front panel Display Rea...
Page 74 - Index
Index v A Adjusting the tone .......................................... 42Alarm .............................................................. 47Auto Standby ................................................. 49 v B Bluetooth device ............................................ 35 v C CD ................
