Page 2 - ENGLISH; SAFETY PRECAUTIONS; C A U T I O N; RISK OF ELECTRIC SHOCK; CAUTION; FOR CANADA MODEL ONLY; FRANCAIS; NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION
ENGLISH 2 2 SAFETY PRECAUTIONS C A U T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DONOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICINGTO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within anequilatera...
Page 3 - SAFETY INSTRUCTIONS; B. Objects have fallen, or liquid has been spilled into the
3 SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructionsshould be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructionsshould be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in theope...
Page 4 - TABLE OF CONTENTS; power cord and input/output connection cords.
ENGLISH 4 2 INTRODUCTION 2 ACCESSORIES Thank you for choosing the DENON AVR-2802/982 Digital Surround A / V receiver. This remarkable component has been engineered to providesuperb surround sound listening with AV theater sources such as DVD, as well as providing outstanding high fidelity reproducti...
Page 5 - ENGLIS; CAUTIONS ON HANDLING; Multi Room Music Entertainment System; Multi Source Function:; II; Dolby Pro Logic; Component Video Switching
ENGLIS 5 3 CAUTIONS ON HANDLING 4 FEATURES • Switching the input function when input jacks are notconnected A clicking noise may be produced if the input function is switchedwhen nothing is connected to the input jacks. If this happens, eitherturn down the MASTER VOLUME control or connect components...
Page 6 - DIGITAL AUDIO; CONNECTIONS; • Do not plug in the AC cord until all connections have been; Connecting the audio components
ENGLISH 6 R L R L R INPUT OUTPUT L R L R OUTPUT L R L INPUT OPTICAL COAXIAL OUTPUT OPTICAL L R L R L R L R OUTPUT DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO B B 5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right ...
Page 7 - • To connect the video signal, connect using a 75
ENGLIS 7 IN VIDEO R L R OUT IN AUDIO VIDEO OUT IN L R L R L R L R OUT IN AUDIO VIDEO OUT IN L R L R L R L R OUT VIDEO OUT L AUDIO L R R OUT VIDEO OUT L AUDIO L R R L R L R L R L R L B B Connecting video components • To connect the video signal, connect using a 75 Ω /ohms video signal cable cord. Usi...
Page 8 - A note on the S input jacks
ENGLISH 8 IN S-VIDEO OUT S-VIDEO OUT S-VIDEO OUT IN S-VIDEO OUT IN S-VIDEO B B Connecting a video component equipped with S-Video jacks • When making connections, also refer to the operating instructions of the other components.• A note on the S input jacks The input selectors for the S inputs and p...
Page 9 - color difference output.; Connecting a DVD player; Connecting a monitor TV; • The color difference input jacks may be indicated differently on
ENGLIS 9 Y C R C B VIDEO OUT Y C R C B COMPONENT VIDEO IN COMPONENT B Connecting a Video Component Equipped with Color Difference (Component - Y, P R /C R , P B /C B ) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components.• The signals i...
Page 10 - • An F-type FM antenna cable plug can be connected directly.; AM loop antenna assembly; Connection of AM antennas
ENGLISH 10 Connecting the antenna terminals DIRECTION OF BROADCASTING STATION 75 Ω /ohms COAXIAL CABLE FM ANTENNA FM INDOORANTENNA(Supplied) AM LOOPANTENNA(Supplied) AM OUTDOORANTENNA GROUND • An F-type FM antenna cable plug can be connected directly. AM loop antenna assembly Connect to the AMantenn...
Page 11 - Connecting the MULTI ZONE jacks
ENGLIS 11 R L B L R L R Connecting the external input (EXT. IN) jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with a different type of multi-channel decoder, such as a DVD Audio player, or a multi-channel SACD player, or other future multi...
Page 12 - Speaker Impedance; Connecting banana plugs; Protector circuit
ENGLISH 12 Speaker system connections • Connect the speaker terminals with the speakers making sure that like polarities are matched ( ≈ with ≈ , √ with √ ). Mismatching of polarities will result in weak central sound, unclear orientation ofthe various instruments, and the sense of direction of the ...
Page 13 - Connections; Precautions when connecting speakers
ENGLIS 13 (L) (L) (R) (R) (L) (R) (L) (R) L R B Connections • When making connections, also refer to the operating instructions of the other components. Connection jack forsubwoofer with built-inamplifier (super woofer),etc. FRONT SPEAKER SYSTEMS (A) CENTER SPEAKER SYSTEM SURROUND BACK SPEAKER SYSTE...
Page 14 - PART NAMES AND FUNCTIONS; Front Panel; Display
ENGLISH 14 6 PART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). AVR-2802 PRECISION AUDIO COMPONENT / AV SURROUND RECEIVER OUTPUT SIGNAL DETECT SURROUND BACK CH TUNING PRESET REC / MULTI 6.1 / 7.1 SURROUND SOURCE ON / STAND...
Page 15 - Remote control unit; NOTE
ENGLIS 15 DVD START LEARNED/TX SPEAKER TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP RETURN STATUS DISPLAY ON SCREEN DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH/6CH STEREO STEREO INPUT MODE ANALOG EXT.IN MUTING MASTER VOL. VOLUME DISC SKIP+ SYSTEM CALL POWER VDP TUNER...
Page 16 - SETTING UP THE SYSTEM; • Use the following buttons to set up the system:; SYSTEM SETUP button; characters on TVs with small screens or low resolutions.
ENGLISH 16 TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI RETURN DVD SET UP STATUS DISPLAY ON SCREEN MUTING AVR/AVC VIDEO DVD TV AUDIO VDP VCR CD MULTI CDR/MD TAPE SYSTEM SETUP SURROUND PARAMETER CH SELECT SELECT ENTER 7 SETTING UP THE SYSTEM • Once all connections with other AV com...
Page 17 - Speaker system layout; Before setting up the system; Display the System Setup Menu.; Setting the type of speakers; combination of speakers actually being used.; At the System Setup Menu select “Speaker Configuration”.
ENGLIS 17 • Speaker system layout Basic system layout• The following is an example of the basic layout for a system consisting of seven speaker systems and a television monitor: Subwoofer Center speaker system Surround speaker systems Surround back speaker systems Front speaker systemsSet these at t...
Page 18 - • To select the parameter; Press the ENTER button to finalize the setting.; Parameters; Crossover Frequency mode.
ENGLISH 18 3 Set whether or not speakers areconnected and, if so, their sizeparameters.• To select the speaker • To select the parameter 4 ENTER Press the ENTER button to finalize the setting. NOTE: • Select “Large” or “Small” not according to the actual size of the speaker but according to the spea...
Page 19 - Select the “Crossover Frequency” mode.; — Assignment of low frequency signal range —
ENGLIS 19 Setting the Crossover Frequency and Subwoofer mode 1 3 ENTER Select the “Crossover Frequency” mode. Enter the setting.The System Setup Menu reappears. This screen is not displayed when not using a subwoofer.• Set the crossover frequency and subwoofer mode according to the speaker system be...
Page 20 - Setting the SB CH Auto Flag Detect; Select the desired setting.; Setting; for the method of playback of the surround back speaker in
ENGLISH 20 Setting the SB CH Auto Flag Detect Set the operation for the digital signals when playing in the 6.1 SURROUND and DTS-ES surround modes. 1 At the System Setup Menu select “SB CH Auto FlagDetect” and press the ENTER button. ENTER 2 Select the desired setting. We recommend setting this to “...
Page 21 - At the System Setup Menu select “Delay Time”.; Switch to the Delay Time screen.
ENGLIS 21 Setting the delay time 1 At the System Setup Menu select “Delay Time”. • Input the distance between the listening position and the different speakers to set the delay time for the surround mode.• The delay time can be set separately for surround speakers A and B. Preparations: Measure the ...
Page 22 - At the System Setup Menu select “Channel Level”.; Setting the channel level
ENGLISH 22 6 Set the distance between thecenter speaker and listeningposition.The distance changes in units of 1foot (0.1 meters) each time thebutton is pressed. Select the valueclosest to the measured distance. If “Yes” is selected for “Default”, the settings are automatically resetto the default v...
Page 24 - At the System Setup Menu select “Digital In Assignment”.; Switch to the Digital In Assignment screen.
ENGLISH 24 When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affectALL surround modes. Consider this mode a Master Channel Level adjustment mode.After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then ac...
Page 25 - At the System Setup Menu select “On Screen Display”.; Switch to the On Screen Display screen.; Auto tuner presets; using the manual “Preset memory” operation.
ENGLIS 25 Setting the on-screen display (OSD) • Use this to turn the on-screen display (messages other than the menu screens) on or off. 1 At the System Setup Menu select “On Screen Display”. 2 3 4 ENTER ENTER Switch to the On Screen Display screen. Select “ON” or “OFF”. Enter the setting.The System...
Page 26 - At the System Setup Menu, press the SYSTEM SETUP button.; On-screen display signals; connected to the S-video MONITOR OUT video signal output jack.
ENGLISH 26 After completing system setup This button can be pressed at any time during the system setup process to complete the process. TITLE SYSTEM SETUP 1 At the System Setup Menu, press the SYSTEM SETUP button. The changed settings are entered and the on-screen display turns off. • On-screen dis...
Page 27 - REMOTE CONTROL UNIT; Inserting the batteries; Notes on Batteries; Using the remote control unit
ENGLIS 27 8 REMOTE CONTROL UNIT • The included remote control unit (RC-903) can be used to operate not only the AVR-2802/982 but other remote control compatible DENON components as well. Furthermore, it is equipped with a function for learning the control signals of remote control units of other man...
Page 28 - system buttons
ENGLISH 28 Operating DENON audio components • Turn on the power of the different components before operating them. 1 2 3 Set mode switch 1 to “AUDIO (AVR/AVC)”. Set mode switch 2 to the position for the component to beoperated. Operate the audio component.• For details, refer to the component’s oper...
Page 29 - Operation is not possible for some models, however.; Set the slide switch to “AUDIO”.; Combinations of Personal System Codes; Set the slide switch to “VIDEO”.; manufacturer of the component as shown on Table 1.
ENGLIS 29 Preset memory (Audio component) • DENON components can be operated by setting the preset memory for CDR or MD. Operation is not possible for some models, however. In this case use the learning function (see page 32) to store the remote control signals. • For instructions on clearing the pr...
Page 30 - “VCR”; unit’s transmitting window while setting the preset memory.; “DVD”
ENGLISH 30 HITACHI A — — “VCR” (DIRECT) MITSUBISHI A PANASONIC A JVC (VICTOR) A SONY A PIONEER TOSHIBA A SANYO A SHARP A NEC A PHILIPS A RCA A GENERAL ELECTRIC A MAGNAVOX A (STEREO) — HITACHI B MITSUBISHI B PANASONIC B JVC (VICTOR) B SONY B — TOSHIBA B SANYO B SHARP B NEC B PHILIPS B RCA B GENERAL E...
Page 31 - Some models cannot be operated with this remote control unit.; DVD player system buttons
ENGLIS 31 Operating a video component stored in the preset memory 1 Set the slide switch to “VIDEO”. AVR/AVC VIDEO AUDIO 2 Set the slide switch to the component to be registered (DVD,VDP, VCR or TV). DVD TV VDP VCR CD MULTI CDR/MD TAPE DVD START LEARNED/TX SPEAKER TUNING BAND TITLE MENU/GUIDE MODE M...
Page 32 - Set the program switch to the position to be learned.; To “learn” other buttons, repeat steps 2 to 6.
ENGLISH 32 Learning function • If your AV component is not a DENON product or it cannot be operated with the preset memory codesets, you can “teach” the AVR-2802/982’s remote control to “learn” the codes from the component’s original remote control. • The buttons that can be “learned” are the CD, TA...
Page 33 - button are transmitted in succession.
ENGLIS 33 System call function • The included remote control unit is equipped with a system call function for transmitting multiple remote control signals when a single button is pressed (this is often referred to as a “macro” function).This function can be used to turn on the amplifier’s power, sel...
Page 34 - Press the SET button.; Press the button whose settings you want to clear.
ENGLISH 34 (3) Storing signals (4) Clearing system call settings DVD START LEARNED/TX SPEAKER TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP RETURN STATUS DISPLAY ON SCREEN DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH / 6CH STEREO STEREO INPUT MODE ANALOG EXT.IN MUTING ...
Page 35 - simultaneously, all the stored codes are cleared.; OPERATION; Before operating
ENGLIS 35 Clearing “learned” remote control signals 1 Press the USE/LEARN selector button with the tip of a pen,etc., to set the learn mode. DVD START LEARNED/TX SPEAKER TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP RETURN STATUS DISPLAY ON SCREEN DOLBY / DTS SURROUND DI...
Page 36 - Select the input source to be played.; Press the ANALOG button to switch to the analog input.; Press the EXT. IN to switch the external input.; • Selecting the AUTO, PCM and DTS modes; AUTO; Input mode selection function; • Note that noise will be output when CDs or LDs recorded in DTS; Note on playing a source encorded with DTS
ENGLISH 36 1 1 3 5 2 VOLUME LEVEL AUTO LOCK STAND BY DIGITAL PCM SIGNAL DIGITAL INPUT REMOTESENSOR B Playing the input source 1 Select the input source to be played. FUNCTION Example: CD CD 8 (Main unit) (Remote control unit) To select the input source when REC/MULTI OUT or TUNING PRESET isselected,...
Page 38 - • In play modes other than the external input mode, the signals; After starting playback; The tone control function will not work in the direct mode.; • To increase the bass or treble: Turn the control clockwise.
ENGLISH 38 Playback using the external input (EXT. IN) jacks 1 Set the external input (EXT.IN) mode.Press the EXT. IN to switchthe external input. EXT.IN EXT.IN (Main unit) (Remote control unit) Once this is selected, the input signals connected to the FL(front left), FR (front right) and C (center)...
Page 39 - Cancelling MUTING mode.; • The output to the speaker and pre-out; [4] Combining the currently playing sound with the desired image; Cancelling simulcast playback.
ENGLIS 39 NOTE: To prevent hearing loss, do not raise the volume level excessivelywhen using headphones. [3] Turning the sound off temporarily (muting) 1 Use this to turn off the audio outputtemporarily.Press the MUTING button. Cancelling MUTING mode. • Press the MUTING button again. MUTING VOLUME L...
Page 40 - RECOUT SOURCE
ENGLISH 40 Multi-source recording/playback [1] Playing one source while recording another (REC OUT mode) 1 Press the REC/MULTI button. REC / MULTI 2 With “RECOUT SOURCE” displayed,turn the FUNCTION knob to select thesource you wish to record.• The “REC” indicator and the indicator of the selected so...
Page 41 - Set the slide switch to “AUDIO” and “MULTI”.; MULTI ZONE MUSIC ENTERTAINMENT SYSTEM; MULTI ZONE MUSIC ENTERTAINMENT SYSTEM (When using MULTI ZONE OUT)
ENGLIS 41 [3] Remote control unit operations during multi-source playback (selecting the source) 1 Set the slide switch to “AUDIO” and “MULTI”. AVR/AVC VIDEO AUDIO DVD TV VDP VCR CD MULTI CDR/MD TAPE 2 Press the input source button.The multi source switches directly. The remote control unit’s MULTI ...
Page 42 - Select the speaker whose level you want to adjust.; Adjust the level of the selected speaker.; • The adjustment range for the different channels is +12 dB to
ENGLISH 42 10 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 22) or from the remote control unit, ...
Page 43 - Dolby Surround Pro Logic; mode
ENGLIS 43 Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL and SR) together. Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources. 1 Select “FADER”...
Page 44 - MODE CINEMA; Surround parameters; Center Width Control:
ENGLISH 44 NOTE: • There are four Dolby Surround Pro Logic modes (NORMAL, PHANTOM, WIDE and 3 STEREO). The AVR-2802/982 sets themode automatically according to the types of speakers setduring the system setup process (page 17). 3 Set the surround parameter mode. SURROUND PARAMETER MENU/GUIDE SURROUN...
Page 46 - Select the various parameters.; Adjust the parameter settings.; This adjusts the tone control. (See “Surround parameters; (Auto Flag Detect Mode) is set to “OFF”. The parameters that can be; AFDM; Dialogue Normalization
ENGLISH 46 4 Display thesurround parametermenu. MENU/GUIDE SURROUND PARAMETER (Remote control unit) SURROUND PARAMETER (Main unit) 5 Select the various parameters. SURROUND PARAMETER 6 (Remote control unit) (Main unit) SELECT (Remote control unit) (Main unit) Adjust the parameter settings. Surround ...
Page 47 - 1 DSP SURROUND SIMULATION; Surround modes and their features; ROCK ARENA; Personal Memory Plus
ENGLIS 47 11 DSP SURROUND SIMULATION • The AVR-2802/982 is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of six preset surround modes can be selected according to the program source and the paramete...
Page 49 - Turn the SELECT knob to select the surround mode.; • When turned clockwise; • When turned counterclockwise; Surround Back CH ON
ENGLIS 49 VOLUME LEVEL AUTO LOCK STAND BY DIGITAL PCM SIGNAL DIGITAL INPUT REMOTESENSOR B 2 1 1,3 • Operating the surround mode and surround parameters from the main unit‘s panel. 1 Turn the SELECT knob to select the surround mode. SELECT • When turned clockwise 1 DIRECT 1 STEREO 1 DOLBY PRO LOGIC I...
Page 50 - To end the setting mode, press the surround parameter button again.; • To select Bass or Treble.; • To decrease the bass or treble:
ENGLISH 50 Tone control setting • Use the tone control setting to adjust the bass and treble as desired.• To operate the tone control from the remote control unit. 1 Display the surround parameterscreen on the monitor. The screen for the selectedsurround mode appears.“TONE” cannot be selectedin the ...
Page 51 - Cinema
ENGLIS 51 Surround parameters e MODE: (DTS NEO:6) • Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the sameatmosphere with 2-channel sources as with 6.1-channel sources.This mode is effective for playing sources recorded in co...
Page 52 - Surround modes and parameters
C C C C C E E C C C C C C ENGLISH 52 C C E E E E C E E E E E E 2 Surround modes and parameters C : Signal E : No signal B : Turned on or off by speaker configuration setting C : Adjustable E : Not adjustable C : Able E : Unable Channel output FRONT L/R CENTER SURROUND L/R SUB- WOOFER SURROUND BACK L...
Page 53 - Set the input function to “TUNER”.; Auto tuning; “Auto” appears on the display.; 2 LISTENING TO THE RADIO
ENGLIS 53 Manual tuning 1 Set the input function to “TUNER”. 2 Watching the display, press the BAND button to select thedesired band (AM or FM). BAND 3 Press the MODE button to set the manual tuning mode. Check that the display’s “AUTO” indicator turns off. MODE 4 Press the TUNING UP or DOWN button ...
Page 54 - Press the MEMORY button.; Preset memory
ENGLISH 54 Checking the preset stations 1 Use the “Auto tuning” or “Manual tuning” operation to tunein the station to be preset in the memory. 2 Press the MEMORY button. MEMORY 3 SHIFT Press the SHIFT button and select the desired memory block(A to E). 4 CHANNEL Press the CHANNEL + (UP) or – (DOWN) ...
Page 55 - • To call out out preset stations from the remote control unit.; 3 LAST FUNCTION MEMORY; power switch is off and with the power cord disconnected.; 4 INITIALIZATION OF THE MICROPROCESSOR; • Calling out preset stations from the main unit‘s panel.
ENGLIS 55 Recalling preset stations • To call out out preset stations from the remote control unit. 1 Watching the display, press theSHIFT button to select the presetmemory block. SHIFT CHANNEL (Remote control unit) 2 Watching the display, press theCHANNEL + (UP) or – (DOWN)button to select the desi...
Page 56 - 5 TROUBLESHOOTING
ENGLISH 56 15 TROUBLESHOOTING If a problem should arise,first check the following.1. Are the connections correct ?2. Have you operated the receiver according to the Operating Instructions ?3. Are the speakers, turntable and other components operating property ? If this unit is not operating properly...
Page 57 - 6 ADDITIONAL INFORMATION; Optimum surround sound for different sources; Types of multi-channel signals; Multiple surround speakers; Other types of audio
ENGLIS 57 16 ADDITIONAL INFORMATION Optimum surround sound for different sources There are currently various types of multi-channel signals (signals or formats with more than two channels). 2 Types of multi-channel signals Dolby Digital, Dolby Pro Logic, DTS, high definition 3-1 signals (Japan MUSE ...
Page 58 - Surround back speakers; Change of positioning and acoustic image; Number of surround back speakers
ENGLISH 58 Surround back speakers A 6.1-channel system is a conventional 5.1-channel system to which the “surround back” (SB) channel has been added. This makes it easy toachieve sound positioned directly behind the listener, something that was previously difficult with sources designed for conventi...
Page 59 - Speaker setting examples; (1) Basic setting for primarily watching movies
ENGLIS 59 • Set the front speakers, center speaker and subwoofer in the same positions as in example (1). • It is best to place the surround speakers directly at the side or slightly to the front of the viewing position, and 60 to 90 cm above the ears. • Same as surround back speaker installation me...
Page 60 - Dolby Surround
ENGLISH 60 Surround The AVR-2802/982 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the samesense of presence as in a movie theater. Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digi...
Page 61 - DTS compatible media and playback methods
ENGLIS 61 DTS Digital Surround Digital Theater Surround (also called simply DTS) is a multi-channel digital signal format developed by Digital Theater Systems.DTS offers the same “5.1” playback channels as Dolby Digital (front left, front right and center, surround left and surround right) as well a...
Page 62 - DTS-ES Extended Surround; surround
ENGLISH 62 DTS-ES Extended Surround TM DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital Theater Systems Inc. While offering high compatibilitywith the conventional DTS Digital Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround...
Page 65 - 7 SPECIFICATIONS
ENGLIS 65 17 SPECIFICATIONS 2 Audio section • Power amplifierRated output: Front: 90 W + 90 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.) 135 W + 135 W (6 Ω /ohms, 1 kHz with 0.7% T.H.D.) Center: 90 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.) 135 W (6 Ω /ohms, 1 kHz with 0.7% T.H.D.) Surround:...
Page 70 - AVR-2802 System Setup Guide & Recommendations; (Speaker and Amplifier Hook-up diagrams are attached at the
1 T T h h e e f f i i r r s s t t n n a a m m e e i i n n d d i i g g i i t t a a l l a a u u d d i i o o . . AVR-2802 System Setup Guide & Recommendations Be sure all components are properly connected, and that the Speakers are placed andwired correctly to the AVR-2802 (and amplifier if setup f...
Page 71 - SPEAKER CONFIGURATION; arrow key will take you to the ‘Surrounds’ screen..; all low bass; , you can select ‘Large’ for the front speakers. When ‘Large’
2 SPEAKER CONFIGURATION l These settings are extremely crucial to the overall sound quality and performance of the AVR-2802. Use the “Left/Right” arrow keys to select size and the “Up/Down” arrow keysto select the speaker channel to adjust. l Your options for speaker sizes are ‘Large’, ‘Small’, or ‘...
Page 72 - room average by making adjustments while moving around the room!
3 DELAY TIME l This menu allows you to easily configure the delay times for all the speakers, including the subwoofer, in the system. We suggest you use a tape measure to help you be asaccurate as possible. This is a performance advantage over other receivers that allowonly center channel (front and...
Page 73 - Digital In Assignment; Make note that no two sources can share the same digital input.; On Screen Display; Be sure an antenna is attached properly!
4 Use the “Up/Down” arrows to raise/lower the level from each channel, and use the“Left/Right” arrows to select the channel to adjust. Take your time! • We recommend that once you have completed adjusting the levels, to write down and secure, the levels for every channel. This will help you to reset...
