Denon AVC-3890- User Manual

Denon AVC-3890

Denon AVC-3890– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
Page: / 15

Table of Contents:

  • Page 2 – Protocol specification; Basic specification
  • Page 3 – The example of a command; MSTHX SURROUND EX : surround Mode Set to THX SURROUND EX
  • Page 4 – Others; K) Four seconds later, please transmit the next
  • Page 5 – COMMAND and PARAMETER list; COMMAND PARAMETER
  • Page 12 – EVENT PARAMETER
Loading the manual

1/15

DENON AVR/AVC control protocol

Ver. 4.0a

Application model :

 

AVR-3805/AVC3890

Application terminal : RS-232C

Connector specification

Connector type : DB-9pin female type, slave straight connection (DCE type)

( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Common(GND) , 4,6,7,8,9pin : NC )

Communication format :

Synchronous system

: Tone step synchronization

communication system

: A half duplex

Communication speed

: 9600bps

Character

length

:

8

bits

Parity

control

:

None

Start

bit

:

1

bit

Stop

bit

:

1

bit

Communication procedure

: Non procedural

Communication data length

: 135 bytes (maximum)

Version Date

Contents

Page

4.0 29.Feb.’06

Original

4.0a

06.Apr.’06

2.Added item K)

4

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Protocol specification; Basic specification

2/15 Protocol specification The following three data forms is defined. COMMAND   : The message sent to a system(AVR/AVC) from a controller(Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller(Touch Panel etc.) from a system(AVR/AVC) The result ...

Page 3 - The example of a command; MSTHX SURROUND EX : surround Mode Set to THX SURROUND EX

3/15 The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSTHX SURROUND EX<CR> : surround Mode Set to THX SURROUND EX MVUP<CR> : Master Volume UP PWON<CR> : system PoWer ON PWSTANDBY<CR> : system PoWer STANDBY SI?<CR> ...

Page 4 - Others; K) Four seconds later, please transmit the next

4/15 Others A) COMMAND is receivable also during transmission of EVENT . B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT . C) CHANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE a...

Other Denon Models