Delta SPBD-155E4J1RD - Manual
Delta SPBD-155E4J1RD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Absolute Maximum Ratings; Recommended Operating Conditions; CC; Specification of Transmitter
- Page 3 – Transmitter; DT; Receiver; DR
- Page 4 – Parameter
- Page 5 – Pin Function Definitions
- Page 7 – Recommend Interface Circuit; SerDes IC; * Depands on SerDes IC used; SFP Host Board Schematic; Design criterion of the capacitor used is the
- Page 8 – Outline Dimensions; Transmitter Wavelength; Black
- Page 9 – Regulatory Compliance; Air Discharge; Appendix A. Document Revision; Preliminary
SPBD-155E4J1RD
DELTA ELECTRONICS, INC.
1 Revision:
S1
04/11/2007
www.deltaww.com
Intelligent SFP Bi-Directional Transceiver Module
for Fast Ethernet, ATM, SONET OC-3/SDH STM-1
FEATURES
RoHS compliant
Digital Diagnostic SFF-8472, Rev. 9.5 MSA
compliant
Simplex LC connector with 1310nm
Transmitter and 1550nm Receiver
Single + 3.3V power supply and TTL logic
interface
Bellcore GR-468 compliant
Laser class 1 product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Description
The SPBD-155xxxxx series are hot pluggable
3.3V Small-Form-Factor (SFP) Bi-Directional
transceiver module designed expressly for
high-speed communication applications that
require rates of up to 155Mbit/sec. It is compliant
with the Fast Ethernet, ATM, SONET OC-3/SDH
STM-1 standards, as well as the SFP Multisource
Agreement (MSA).
The SPBD-155xxxxx transceivers provide with
the LC receptacle that is compatible with the
industry standard LC connector. The transceiver is
also compatible with industry standard RFT
connector and cage. It also includes a LOS (Loss
Of Signal) circuit that provides a TTL logic-high
output when an unusable optical signal level is
detected.
The module includes 1310nm un-cool FP laser,
InGaAs PIN, Preamplifer and WDM filter in a
high-integrated optical assembly for high-density
system application. The SFP Bi-Directional
transceiver can upgrade transmission capacity very
convenient without installing new fibers.
Application
TTC TS-1000
ITU-T G.985
IEEE 802.3ah 100BASE-BX/ Fast Ethernet
SONET OC-3/SDH STM-1
FTTx WDM Broadband Access
Switch to switch/backbone interface
Performance
SPBD-155E4J1RD data link up to 15km in
9/125um single mode fiber.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SPBD-155E4J1RD DELTA ELECTRONICS, INC. 2 Revision: S1 04/11/2007 www.deltaww.com 1. Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Storage Ambient Humidity H A 5 95 % Power Supply Voltage V CC 0 5 V Signal Input Voltage -0.3 Vcc+0.3 V Optical Inpu...
SPBD-155E4J1RD DELTA ELECTRONICS, INC. 3 Revision: S1 04/11/2007 www.deltaww.com 4. Specification of Receiver Parameter Symbol Min. Typ. Max. Unit Note Input Optical Wavelength λ IN 1480 1600 nm PIN-PD Receiver Sensitivity P IN -31 dBm Note (1) Input Saturation Power (Overload) P SAT -3 dBm LOS-Deas...
SPBD-155E4J1RD DELTA ELECTRONICS, INC. 4 Revision: S1 04/11/2007 www.deltaww.com 6. Enhanced Digital Diagnostic Interface The memory map in the following describes an extension to the memory map defined in SFP MSA. The enhanced interface uses the two wire serial bus address 1010001X(A2h) to provide ...
