Delta SPBD-155E4J1R - Manual
Delta SPBD-155E4J1R – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Absolute Maximum Ratings; Recommended Operating Conditions; CC; Specification of Transmitter
- Page 3 – Specification of Receiver; Parameter; itu; Optical Pulse Mask with Bessel Filter Specified in ITU-T G.957
- Page 4 – Electrical Interface Characteristics; Transmitter; DT; Receiver; DR
- Page 5 – Timing Parameters Definition; SFP TX_DISABLE timing during normal operation.
- Page 6 – Pin Function Definitions
- Page 8 – Recommend Interface Circuit; SerDes IC; * Depands on SerDes IC used; SFP Host Board Schematic; Design criterion of the capacitor used is the
- Page 9 – Outline Dimensions; Transmitter Wavelength; Black
- Page 11 – Regulatory Compliance; Air Discharge; Appendix A. Document Revision; Preliminary
SPBD-155E4J1R
DELTA ELECTRONICS, INC.
1 Revision:
S1
09/20/2006
www.deltaww.com
SFP Bi-Directional Transceiver Module for Fast
Ethernet, ATM, SONET OC-3/SDH STM-1
FEATURES
RoHS compliant
SFF-8472 MSA compliant
Simplex LC connector
1310nm Transmitter, 1550nm Receiver
Single + 3.3V power supply and TTL logic
interface
Commercial and Industrial temperature
available
Bellcore GR-468 compliant
Laser class 1 product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Description
The SPBD-155xxxx series are hot pluggable
3.3V Small-Form-Factor (SFP) Bi-Directional
transceiver module designed expressly for
high-speed communication applications that
require rates of up to 155Mbit/sec. It is compliant
with the Fast Ethernet, ATM, SONET OC-3/SDH
STM-1 standards, as well as the SFP
Multisource Agreement (MSA).
The SPBD-155xxxx transceivers provide with
the LC receptacle that is compatible with the
industry standard LC connector. The transceiver
is also compatible with industry standard RFT
connector and cage. It also includes a LOS
(Loss Of Signal) circuit that provides a TTL
logic-high output when an unusable optical
signal level is detected.
The module includes 1310nm un-cool FP laser,
InGaAs PIN, Preamplifer and WDM filter in a
high-integrated optical assembly for high-density
system application. The SFP Bi-Directional
transceiver can upgrade transmission capacity
very convenient without installing new fibers.
Application
TTC TS-1000
IEEE 802.3ah 100BASE-BX
SONET OC-3/SDH STM-1
FTTx WDM Broadband Access
100Base Fast Ethernet
Performance
SPBD-155E4J1R data link up to 15km in
9/125um single mode fiber.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SPBD-155E4J1R DELTA ELECTRONICS, INC. 2 Revision: S1 09/20/2006 www.deltaww.com 1. Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Operating Ambient Temperature Ta -10 80 ºC Storage Ambient Humidity H A 5 95 % Power Supply Voltage V CC 0 5 V Signal...
SPBD-155E4J1R DELTA ELECTRONICS, INC. 3 Revision: S1 09/20/2006 www.deltaww.com 4. Specification of Receiver Parameter Symbol Min. Typ. Max. Unit Note Input Optical Wavelength λ IN 1480 1600 nm PIN-PD Receiver Sensitivity P IN -31 dBm Note (1) Input Saturation Power (Overload) P SAT -3 dBm LOS-Deass...
SPBD-155E4J1R DELTA ELECTRONICS, INC. 4 Revision: S1 09/20/2006 www.deltaww.com 5. Electrical Interface Characteristics Parameter Symbol Min. Typ. Max. Unit Note Transmitter Total Supply Current I CC A mA Note (1) Differential Data Input Swing V DT 500 2400 mV p-p Differential line input Impedance R...
