Delta SPBD-1250B4Q1RT - Manual
Delta SPBD-1250B4Q1RT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Absolute Maximum Ratings; Recommended Operating Conditions; Specification of Transmitter
- Page 3 – Specification of Receiver; Parameter; Normalized; orm
- Page 4 – Electrical Interface Characteristics; Transmitter; Receiver
- Page 6 – Pin Function Definitions
- Page 8 – Recommend Interface Circuit; SerDes IC; * Depands on SerDes IC used; SFP Host Board Schematic; Design criterion of the capacitor used is the
- Page 9 – Outline Dimensions; Transmitter Wavelength; Black
- Page 10 – Regulatory Compliance; Air Discharge; Appendix A. Document Revision; Preliminary
SPBD-1250B4Q1RT
DELTA ELECTRONICS, INC.
1 Revision:
S1
03/12/2007
www.deltaww.com
Intelligent SFP Bi-Directional Transceiver
Module for Gigabit Ethernet and Fast Ethernet
FEATURES
RoHS compliant
Digital Diagnostic SFF-8472, Rev. 9.5 MSA
compliant
Support Multi-Rate for Gigabit Ethernet and
Fast Ethernet
Simplex LC connector with 1490nm
Transmitter and 1310nm Receiver
Single + 3.3V power supply and TTL logic
interface
Bellcore GR-468 compliant
Laser class 1 product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Description
The SPBD-1250xxxx series are hot pluggable
3.3V Small-Form-Factor (SFP) Bi-Directional
transceiver module designed expressly for
high-speed communication applications that
require rates of up to 1250Mbit/sec. It is
compliant with the Gigabit Ethernet and Fast
Ethernet standards, as well as the SFP
Multisource Agreement (MSA).
The SPBD-1250xxxx transceivers provide with
the LC receptacle that is compatible with the
industry standard LC connector. The transceiver
is also compatible with industry standard RFT
connector and cage. It also includes a LOS
(Loss Of Signal) circuit that provides a TTL
logic-high output when an unusable optical
signal level is detected.
The module includes 1490nm un-cool DFB
laser, InGaAs PIN, Preamplifer and WDM filter in
a high-integrated optical assembly for
high-density system application. The SFP
Bi-Directional transceiver can upgrade
transmission capacity very convenient without
installing new fibers.
Application
IEEE 802.3ah 1000BASE-BX
IEEE 802.3ah 100BASE-BX
Gigabit Ethernet/ Fast Ethernet
FTTx WDM Broadband Access
Performance
SPBD-1250B4Q1RT data link up to 10km in
9/125um single mode fiber.
Support industrial temperature operating
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SPBD-1250B4Q1RT DELTA ELECTRONICS, INC. 2 Revision: S1 03/12/2007 www.deltaww.com 1. Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Storage Ambient Humidity H A 5 95 % Power Supply Voltage V CC 0 5 V Signal Input Voltage -0.3 Vcc+0.3 V Optical Inp...
SPBD-1250B4Q1RT DELTA ELECTRONICS, INC. 3 Revision: S1 03/12/2007 www.deltaww.com 4. Specification of Receiver Parameter Symbol Min. Typ. Max. Unit Note Input Optical Wavelength λ IN 1260 1360 nm PIN-PD Receiver Sensitivity P IN -23 dBm Note (1) Input Saturation Power (Overload) P SAT -3 dBm Receive...
SPBD-1250B4Q1RT DELTA ELECTRONICS, INC. 4 Revision: S1 03/12/2007 www.deltaww.com 5. Electrical Interface Characteristics Parameter Symbol Min. Typ. Max. Unit Note Transmitter Total Supply Current I CC A mA Note (1) Differential Data Input Swing V DT 500 2400 mV p-p Differential line input Impedance...
