Delta SPBD-1250A4Q1RT - Manual
Delta SPBD-1250A4Q1RT – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Absolute Maximum Ratings; Recommended Operating Conditions; CC; Specification of Transmitter; Compliant with IEEE 802.3ah
- Page 3 – Specification of Receiver; Parameter; Center Wavelength; Normalized Time
- Page 4 – Electrical Interface Characteristics; Transmitter; DT; Receiver; DR
- Page 6 – Pin Function Definitions
- Page 8 – Recommend Interface Circuit; SerDes IC; * Depands on SerDes IC used; SFP Host Board Schematic; Design criterion of the capacitor used is the
- Page 9 – Outline Dimensions; Transmitter Wavelength; Blue
- Page 10 – Regulatory Compliance; Air Discharge; Appendix A. Document Revision; Preliminary
SPBD-1250A4Q1RT
DELTA ELECTRONICS, INC.
1 Revision:
S1
03/12/2007
www.deltaww.com
Intelligent SFP Bi-Directional Transceiver
Module for Gigabit Ethernet
FEATURES
z
RoHS compliant
z
Digital Diagnostic SFF-8472 Compliant
z
Simplex LC connector with 1310nm
Transmitter and 1490nm Receiver
z
Integrated with WDM filter to cut 1550nm and
1650nm optical signal off
z
Single + 3.3V power supply and TTL logic
interface
z
Bellcore GR-468 compliant
z
Laser class 1 product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Description
The SPBD-1250xxxx series are hot pluggable
3.3V Small-Form-Factor (SFP) Bi-Directional
transceiver module designed expressly for
high-speed communication applications that
require rates of up to 1250Mbit/sec. It is compliant
with the Gigabit Ethernet standards, as well as the
SFP Multisource Agreement (MSA).
The SPBD-1250xxxx transceivers provide with
the LC receptacle that is compatible with the
industry standard LC connector. The transceiver is
also compatible with industry standard RFT
connector and cage. It also includes a LOS (Loss
Of Signal) circuit that provides a TTL logic-high
output when an unusable optical signal level is
detected.
The module includes 1310nm un-cool FP laser,
InGaAs PIN, Preamplifer and WDM filter in a
high-integrated optical assembly for high-density
system application. The SFP Bi-Directional
transceiver can upgrade transmission capacity very
convenient without installing new fibers.
Application
z
IEEE 802.3ah 1000BASE-BX10
z
Gigabit Ethernet Application
z
FTTx WDM Broadband Access
z
Switch to switch/backbone interface
Performance
z
SPBD-1250A4Q1RT data link up to 10km in
9/125um single mode fiber.
z
Support industrial temperature operating
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SPBD-1250A4Q1RT DELTA ELECTRONICS, INC. 2 Revision: S1 03/12/2007 www.deltaww.com 1. Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Storage Ambient Humidity H A 5 95 % Power Supply Voltage V CC 0 5 V Signal Input Voltage -0.3 Vcc+0.3 V Optical Inp...
SPBD-1250A4Q1RT DELTA ELECTRONICS, INC. 3 Revision: S1 03/12/2007 www.deltaww.com Note (4): Spectral Width (RMS) Note (5). Eye Mask definition 4. Specification of Receiver Parameter Symbol Min. Typ. Max. Unit Note Input Optical Wavelength λ IN 1480 1500 nm PIN-PD Receiver Sensitivity P IN -23 dBm No...
SPBD-1250A4Q1RT DELTA ELECTRONICS, INC. 4 Revision: S1 03/12/2007 www.deltaww.com Stressed Receive sensitivity -15.4 dBm Stressed Receive sensitivity OMA 44.8 -13.5 uW dBm Vertical Eye-closure Penalty V ECP 2.6 dB Deterministic Jitter DJ 170 ps Total Jitter TJ 266 ps Output Data Rise/Fall time t r /...
