Delta Series E48SR - Manual
Delta Series E48SR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TECHNICAL SPECIFICATIONS; PARAMETER
- Page 3 – ELECTRICAL CHARACTERISTICS CURVES; maximum input voltage at 25°C
- Page 4 – For Negative Remote On/Off Logic; For Positive Remote On/Off Logic; Turn-on transient at full rated load current (resistive
- Page 5 – Figure
- Page 7 – Output voltage ripple at nominal input voltage and
- Page 8 – Soldering and Cleaning Considerations; DESIGN CONSIDERATIONS; Input Source Impedance
- Page 9 – FEATURES DESCRIPTIONS; Over-Voltage Protection; Remote on/off implementation; Remote Sense; Vout; Effective circuit configuration for remote sense
- Page 10 – Vo; up
- Page 11 – THERMAL CONSIDERATIONS; Thermal Testing Setup; Wind tunnel test setup; Thermal Derating; Hot spot temperature measured point.; Output load vs. ambient temperature and air velocity @
- Page 12 – PICK AND PLACE LOCATION SURFACE-MOUNT TAPE & REEL
- Page 13 – Temp
- Page 14 – MECHANICAL DRAWING; module; Pin No. Name Function
- Page 15 – PART NUMBERING SYSTEM; MODEL LIST; MODEL NAME; WARRANTY
DATASHEET
DS_E48SR05012_05222008
FEATURES
High Efficiency: 91.5% @ 5.0V/12A
Size:
58.4mmx22.80mmx8.4mm
(2.30”x0.90”x0.33”)
Standard
footprint
Industry standard pin out
Fixed frequency operation: 350KHz
Input UVLO, Output OCP, OVP, OTP
1500V
isolation
Basic
insulation
No minimum load required
2:1 Input voltage range
ISO 9001, TL 9000, ISO 14001, QS 9000,
OHSAS 18001 certified manufacturing
facility
UL/cUL 60950-1 (US & Canada)
recognized, and TUV (EN60950-1) certified
CE mark meets 73/23/EEC and 93/68/EEC
directive
APPLICATIONS
Telecom/Datacom
Wireless
Networks
Optical
Network
Equipment
Server and Data Storage
Industrial/Testing
Equipment
OPTIONS
SMT or through-hole versions
Positive on/off logic
Short pin lengths
Delphi Series E48SR, 66W Eighth Brick Family
DC/DC Power Modules: 48V in, 5.0V/12A out
The Delphi Series E48SR Eighth Brick, 48V input, single output, isolated
DC/DC converter is the latest offering from a world leader in power
systems technology and manufacturing – Delta Electronics, Inc. This
product family provides up to 66 watts of power or 25A of output current
(1.8V and below) in an industry standard footprint. With creative design
technology and optimization of component placement, these converters
possess outstanding electrical and thermal performances, as well as
extremely high reliability under highly stressful operating conditions.
All
models are fully protected from abnormal input/output voltage, current,
and temperature conditions. The Delphi Series converters meet all safety
requirements with basic insulation.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DS_E48SR05012_05222008 2 TECHNICAL SPECIFICATIONS (T A =25°C, airflow rate=300 LFM, V in =48Vdc, nominal Vout unless otherwise noted.) PARAMETER NOTES and CONDITIONS E48SR05012 (Standard) Min. Typ. Max. Units ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous 75 Vdc Transient (100ms) 100ms 100 Vdc Op...
DS_E48SR05012_05222008 3 ELECTRICAL CHARACTERISTICS CURVES Figure 1: Efficiency vs. load current for minimum, nominal, and maximum input voltage at 25°C Figure 2: Power dissipation vs. load current for minimum, nominal, and maximum input voltage at 25°C. Figure 3: Typical full load input characteris...
DS_E48SR05012_05222008 4 ELECTRICAL CHARACTERISTICS CURVES For Negative Remote On/Off Logic Figure 4: Turn-on transient at full rated load current (resistive load) (2 ms/div). Vin=48V.Top Trace: Vout, 2V/div; Bottom Trace: ON/OFF input, 5V/div Figure 5: Turn-on transient at zero load current (2 ms/d...
