Delta OPT-155Bxxxxxx - Manual
Delta OPT-155Bxxxxxx – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Absolute Maximum Ratings; Symbol; Recommended Operating Conditions; Optical Characteristics
- Page 3 – Mask of the eye diagram for the optical transmit signal
- Page 5 – Recommended Circuit Schematic
- Page 6 – Package Outline Drawing
OPT-155Bxxxxxx
DELTA ELECTRONICS, INC.
http://www.deltaww.com
1
Jan., 2008
Rev.
：
0H
155Mbps 1x9 SC Duplex Optical Transceiver Module for
Fast Ethernet, ATM, SONET/OC-3, SDH/STM-1
Features
：
Full Compliance with the Optical Performance
Requirements of the ATM 100Mbps and 100
Base-FX Version of IEEE 802.3u.
Industry Standard 1x9 Footprint and Duplex
SC Connector Interface.
Single 5V
（
OPT-155B1xxxxx
）
or 3.3V
（
OPT-155B2xxxxx
）
Power Supply.
PECL Differential Inputs and Outputs.
PECL Receiver Signal Detect Indicator.
RoHS Compliance.
Wave Solder and Aqueous Wash Process
Compatible.
Description
：
The OPT-155Bxxxxxx series are 1x9 optical
transceiver modules designed expressly for
high-speed communication applications that require
rates of up to 155Mbps. They are all compliant with
the SONET/SDH standards.
The OPT-155Bxxxxxx transceivers are supplied in
industry standard 1x9 SIP package style with duplex
SC connector.
The OPT-155Bxxxxxx also includes a Signal-Detect
circuit that provides PECL logic output state.
The OPT-155Bxxxxxx transceivers can meet Class-1
eye safety products and effective distance depending
on ITU-T G.957 standard or power penalty.
The transmitter sections utilize 1310nm Edge Emitting
InGaAsP Laser Diode. This Laser Diode is packaged
in the optical subassembly portion of the transmitter
section. A custom silicon IC that converts differential
PECL logical signals into an analog LD driving current
drives it.
The receiver sections utilize InGaAs PIN photodiodes
coupled into a custom silicon trans-impedance
preamplifier IC. These are packaged in the optical
subassembly portion of receiver.
These PIN / Preamplifier combinations are coupled
into a custom quantizer IC which provides the final
pulse shaping for the logic output and the Signal
Detect function. The data output is differential. The
signal detect output is single-ended.
Application
：
Single-mode Fiber Backbone Links.
Fast Ethernet and ATM Compatible.
Single-mode Fiber Media Converter.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
OPT-155Bxxxxxx DELTA ELECTRONICS, INC. http://www.deltaww.com 2 Jan., 2008 Rev. ： 0H Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Lead Soldering Temperature T SOLD 260 ºC Lead Soldering Time t SOLD 10 Sec. Supply Voltage V CC 0 6 V Recommended O...
OPT-155Bxxxxxx DELTA ELECTRONICS, INC. http://www.deltaww.com 3 Jan., 2008 Rev. ： 0H -31 OPT-155BxJxxxx -31 OPT-155BxLxxxx -34 OPT-155BxMxxxx Signal Detect-DeAsserted P D -45 dBm Signal Detect-Hysteresis P A -P D 0.5 dB Notes: The sensitivity is provided at a BER of 1×10 -10 or better with an input ...
OPT-155Bxxxxxx DELTA ELECTRONICS, INC. http://www.deltaww.com 5 Jan., 2008 Rev. ： 0H Recommended Circuit Schematic R1=R3=82 ohm (3.3V),68 ohm(5V) R2=R4=130 ohm (3.3V),191 ohm (5V) R5=R6=150 ohm (3.3V),270 ohm (5V) R7=130 ohm (3.3V PECL),82 ohm(5V),NC (TTL) R8=82 ohm (3.3V PECL),130 ohm(5V),NC (TTL) ...
