Delta LCP-200A4HSR - Manual
Delta LCP-200A4HSR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Transmitter
- Page 3 – Optical Characteristics
- Page 6 – Recommend Circuit Schematic; SerDes IC; * Depands on SerDes IC used
- Page 7 – Package Outline Drawing for Metal Housing with Bail de-latch
- Page 8 – SFP timing parameters for SFP management; Parameter Symbol
- Page 9 – : Digital Diagnostic Function
DELTA ELECTRONICS, INC.
1 Aug.,
2006
Rev. 0A
www.deltaww.com
RoHS Compliant Small Form Factor Pluggable Transceiver RoHS
Compliant for ESCON, Fast Ethernet, ATM, SONET OC-3/SDH STM-1
FEATURES
Compliant with SFP Transceiver MSA
specification
Compliant with Industry Standard RFT
Electrical Connector and Cage
1310nm LED Source Technology
Single + 3.3V Power Supply and TTL Logic
Interface
EEPROM with Serial ID Functionality
Laser Class 1 Product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Duplex LC Connector interface
Description
The LCP-200A4HSR is a hot pluggable 3.3V
Small-Form-Factor transceiver module designed
expressly for high-speed communication
applications that require rates of up to
200Mbit/sec. It is compliant with the SFP
Multi-source Agreement.
The LCP-200A4HSR transceivers provide with
the LC receptacle that is compatible with the
industry standard LC connector. The transceiver
is also compatible with industry standard RFT
connector and cage.
The transmitter section consists of a 1310nm
LED in an optical subassembly (OSA) while the
receiver consists of InGaAs PIN photodiode
mounted together with a trans-impedance
preamplifier. The post-amplifier also includes a
LOS (Loss Of Signal) circuit that provides a TTL
logic-high output when an unusable optical
signal level is detected.
The LCP-200A4HSR transceiver is a Class 1
eye safety product. The optical power levels,
under normal operation, are at eye safe level.
Applications
ESCON
SONET OC-3/SDH STM-1
ATM Network
Fast Ethernet
Switch to Switch interface
Switched backplane applications
File server interface
Data Link up to 2km in 62.5/125um Multi Mode
Fiber
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DELTA ELECTRONICS, INC. 2 Aug., 2006 Rev. 0A www.deltaww.com Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Supply Voltage V CC 0 5 V Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Unit Note Case Operating Temperature T C -5 70 º...
DELTA ELECTRONICS, INC. 3 Aug., 2006 Rev. 0A www.deltaww.com Optical Characteristics (V CC =3.135V to 3.465V, Data Rate=200Mb/sec, PRBS=2 23 -1 NRZ, 62.5/125um MMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) P O -20 -14 dBm Optical Extinction Ratio 9 dB Center ...
DELTA ELECTRONICS, INC. 6 Aug., 2006 Rev. 0A www.deltaww.com Recommend Circuit Schematic Laser Diode Photo Diode 1uH 1uH 0.1uF 10uF 0.1uF 0.01uF 0.01uF 0.01uF 0.01uF 0.1uF 10uF RES1 100 Ohms* RES1 RES1 RES1 10k Ohms 100 Ohms VCC Protocol Vcc SerDes IC Protocol IC PLD / PAL Mod_def 2 Mod_def 1 Mod_de...
