Delta LCP-155B4MSRx - Manual
Delta LCP-155B4MSRx – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Absolute Maximum Ratings; Recommended Operating Conditions; Electrical Characteristics; Transmitter; Receiver
- Page 3 – Optical Characteristics; Parameter Symbol; Mask of the eye diagram for the optical transmit signal
- Page 6 – Recommend Circuit Schematic; SerDes IC; * Depands on SerDes IC used
- Page 7 – Package Outline Drawing for Metal Housing with Bail de-latch
- Page 8 – SFP timing parameters for SFP management
- Page 9 – SFP timing parameters:; Successful recovery from transient safety fault condition
- Page 11 – Regulatory Compliance
- Page 12 – Ordering information for SFP modules; Temperature
DELTA ELECTRONICS, INC.
1 Jan.
2008
Rev. 0B
www.deltaww.com
RoHS Compliant Small Form Factor Pluggable Transceiver for Fast
Ethernet, ATM, SONET OC-3/SDH STM-1
FEATURES
Compliant with SFP Transceiver MSA
specification
LC-155B4MSRx long-haul SONET OC-3 / SDH
STM-1 (L-1.1) Compliant
Compliant with Industry Standard RFT
Electrical Connector and Cage
Single + 3.3V Power Supply and TTL Logic
Interface
EEPROM with Serial ID Functionality
Laser Class 1 Product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Duplex LC Connector interface
Description
The LCP-155B4MSRx series are a hot
pluggable 3.3V Small-Form-Factor transceiver
module designed expressly for high-speed
communication applications that require rates of
up to 155Mbit/sec. It is compliant with the ATM,
SONET OC-3/SDH STM-1 standards, as well as
the SFP Multisource Agreement (MSA).
The LCP-155B4MSRx transceivers provide with
the LC receptacle that is compatible with the
industry standard LC connector. The transceiver
is also compatible with industry standard RFT
connector and cage.
The post-amplifier of the LCP-155B4MSRx also
include a LOS (Loss Of Signal) circuit that
provides a TTL logic-high output when an
unusable optical signal level is detected.
The LCP-155B4MSRx transceivers are a Class
1 eye safety product. The optical power levels,
under normal operation, are at eye safe level.
Applications
SONET OC-3/SDH STM-1
ATM Network
Fast Ethernet
Switch to Switch interface
Switched backplane applications
File server interface
Performance
LCP-155B4MSRx Data Link up to 40km in
9/125um Signal Mode Fiber
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DELTA ELECTRONICS, INC. 2 Jan. 2008 Rev. 0B www.deltaww.com Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Note Storage Temperature Ts -40 85 ºC Supply Voltage V CC 0 5 V Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Unit Note Case Operating Temperature T C -5 +70 º...
DELTA ELECTRONICS, INC. 3 Jan. 2008 Rev. 0B www.deltaww.com Optical Characteristics (V CC =3.135V to 3.465V, Data Rate=155Mb/sec, PRBS=2 23 -1 NRZ, 9/125 µ m SMF) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) P O -5 0 dBm Optical Extinction Ratio ER 10 dB Center W...
DELTA ELECTRONICS, INC. 6 Jan. 2008 Rev. 0B www.deltaww.com Recommend Circuit Schematic Laser Diode Photo Diode 1uH 1uH 0.1uF 10uF 0.1uF 0.01uF 0.01uF 0.01uF 0.01uF 0.1uF 10uF RES1 RES1 100 Ohms* RES1 RES1 RES1 10k Ohms 100 Ohms VCC Protocol Vcc SerDes IC Protocol IC PLD / PAL Mod_def 2 Mod_def 1 Mo...
